smc kit trouble shoot please!

poohlvhun · Mar 25, 2006, 03:43 PM

Guys,

I just had the kit installed, all wires hooked up...

BUT when I turned the key to 2nd position, it started spraying non-stop... I am reading about 80psi on the gauge at the nozzle.

Is it "priming"? Will it stop eventually?

What might be causing this?

Any help would be great, I am due for a custom tune by AL tomorrow.

Thanks!

GTVEVO · Mar 25, 2006, 03:51 PM

Sounds like you or someone has something backwards but regardless you should just contact Steve at SMC. He will take care of you, he always does.

poohlvhun · Mar 25, 2006, 04:00 PM

unfortunately, i will getting a custom tune for the alky tomorrow by Al, so this needs to be sorted out tonight

...

Ryu123 · Mar 25, 2006, 04:02 PM

Check that the test button is not stuck in the depressed position?

poohlvhun · Mar 25, 2006, 04:43 PM

the "test" button clicks so i don't think it's stuck...

poohlvhun · Mar 27, 2006, 12:34 PM

I ended up buying a second SMC kit from Dynoflash when I had the car tuned, it worked like a charm!

Steve at SMC was very helpful with the trouble shoot and will be sending out a new kit to me.

Thanks!