 |
Feb 15, 2006, 12:55 PM
|
#1
|
|
Evolved Member
Personal Sales Rating: ( 6)
Join Date: May 2005
Location: Southern, Ohio
Posts: 544
|
Anyone know this!!!!
I have been told to install the nozzle on the Upper IC pipe? I would think it would be better to install it on the cuppling on the Upper IC pipe to give it a straight shot. Thoughts/Comments
|
|
Offline
|
|
|
Feb 15, 2006, 04:22 PM
|
#2
|
|
Silver Sponsor +1
Personal Sales Rating: ( 445)
Join Date: May 2005
Location: Central FL
Posts: 8,315
Drives: 2008 Evolution GSR SSS, 2005 Evolution MR, 2003 Evo GSR, 1995 TsiAWD, 1995 GST, 1995 Tsi 2wd, 1991 GVR4 WW, 1991 GVR4 NBM, 1993 TsiAWD, 1991 Tsi, 1995 RS N20
|
We instructed you to install it in the hard pipe as it is our kit. If you do not take the manufacturer's advice, who's advice can you take?
This is meth injection, not nitrous. Mount it where we suggested.... is our suggestion.
__________________
2005 Evolution VIII MR
763whp/595tq HTA86
10.19 & 143.3mph stock ECU
Factory ECU Expert
2008 Evolution X GSR
12.0@113mph Full Wt+
In House Mustang Dyno AWD-500!
www.ttp-engineering.com
(407) 475-0010
AIM=TTPEngineering
MODIFYING THE 4G63 SINCE 1995, YES 14 YEARS!
TUNING EVO V - EVO X & 2009 RALLIART!
TTP's Myspace page!
|
|
Offline
|
|
|
Feb 15, 2006, 10:55 PM
|
#3
|
|
Evolved Member
Personal Sales Rating: ( 6)
Join Date: May 2005
Location: Southern, Ohio
Posts: 544
|
So, why is it better to attached it to the IC pipe? I know what u suggest but I would like to know the rationale.
|
|
Offline
|
|
|
Feb 15, 2006, 11:12 PM
|
#4
|
|
Evolving Member
Personal Sales Rating: ( 0)
Join Date: Jan 2006
Location: Chandler, AZ
Posts: 165
Drives: 06' EVO IX RS --1989 240SX (RB20DET)-- 2006 Mercedes C230 sport
|
Quote:
|
Originally Posted by TTP Engineering
We instructed you to install it in the hard pipe as it is our kit. If you do not take the manufacturer's advice, who's advice can you take?
This is meth injection, not nitrous. Mount it where we suggested.... is our suggestion.
|
Dude, offense but these guys just busted you hard.. I would maybe have asked them why you should mount it there first.. Then if you didnt like the answer you could ask others.. Looks like you are "getting it straight from the horses mouth", (so to speak), last. Never a good idea.
remember. Always trust your own descision making skills first.. If you rely on others for the answers to your questions in life. You will only get what the others have already gotten.
|
|
Offline
|
|
|
Feb 15, 2006, 11:14 PM
|
#5
|
|
Evolving Member
Personal Sales Rating: ( 0)
Join Date: Jan 2006
Location: Chandler, AZ
Posts: 165
Drives: 06' EVO IX RS --1989 240SX (RB20DET)-- 2006 Mercedes C230 sport
|
I meant NO offense BTW
|
|
Offline
|
|
|
Feb 16, 2006, 06:16 AM
|
#6
|
|
Silver Sponsor +1
Personal Sales Rating: ( 445)
Join Date: May 2005
Location: Central FL
Posts: 8,315
Drives: 2008 Evolution GSR SSS, 2005 Evolution MR, 2003 Evo GSR, 1995 TsiAWD, 1995 GST, 1995 Tsi 2wd, 1991 GVR4 WW, 1991 GVR4 NBM, 1993 TsiAWD, 1991 Tsi, 1995 RS N20
|
Let me answer your question with this question. How are you going to hold it in the rubber pipe if you mount it there. The nozzle is threaded for a reason. It is to be tapped into a metal pipe such as the hard upper ic pipe.
If you are not going to listen to the manufacturer, who are you going to listen to?
If you insist on trying to tap it in a pipe not suggested by the manufacturer, then you are on your own. This is your written disclosure.
__________________
2005 Evolution VIII MR
763whp/595tq HTA86
10.19 & 143.3mph stock ECU
Factory ECU Expert
2008 Evolution X GSR
12.0@113mph Full Wt+
In House Mustang Dyno AWD-500!
www.ttp-engineering.com
(407) 475-0010
AIM=TTPEngineering
MODIFYING THE 4G63 SINCE 1995, YES 14 YEARS!
TUNING EVO V - EVO X & 2009 RALLIART!
TTP's Myspace page!
|
|
Offline
|
|
|
Feb 16, 2006, 10:05 AM
|
#7
|
|
Evolved Member
Personal Sales Rating: ( 6)
Join Date: May 2005
Location: Southern, Ohio
Posts: 544
|
I was trying to get other peoples input on this issue. I have a few friends that have the nozzle on the cuppling and they simply attached a washer and a nut to the underside of the nozzle to hold it in place.
In all seriousness, I appreciate your response ttp-engineering!
P.S. Remember, don't pet it if you just met it.
|
|
Offline
|
|
|
Feb 16, 2006, 10:11 AM
|
#8
|
|
Evolved Member
Personal Sales Rating: ( 6)
Join Date: May 2005
Location: Southern, Ohio
Posts: 544
|
Quote:
|
Originally Posted by Karma'sEvo
Dude, offense but these guys just busted you hard.. I would maybe have asked them why you should mount it there first.. Then if you didnt like the answer you could ask others.. Looks like you are "getting it straight from the horses mouth", (so to speak), last. Never a good idea.
remember. Always trust your own descision making skills first.. If you rely on others for the answers to your questions in life. You will only get what the others have already gotten.
|
I actually did speak with him before posting on the forum. I was directing it toward other people on the board to gathering their input.
Last edited by gaulrich2003; Feb 16, 2006 at 12:50 PM.
|
|
Offline
|
|
|
Feb 16, 2006, 10:13 AM
|
#9
|
|
Evolved Member
Personal Sales Rating: ( 7)
Join Date: Dec 2004
Location: Indy
Posts: 6,442
Drives: 03 evo VIII
|
My input, is listen to TTP!
__________________
03 EVO: AMS 2.3L Stroker/Stock EvoIX turbo/Invida O2/HKS 280 cams/Mellon tune/Walbro 255 /RMR turbo back/cat-delete/QTP cutout/custom sidepipe/ Tanabe Sustec Pro SS II. Coilovers/PWR radiator & Intercooler/AMS lower IC pipe/Exedy HD Twin metallic/ Cusco 23mm rear sway bar/Perrin endlinks/stainless lines/B&M short thro/AEM UEGO guage/HKS DLI II/Team Dynamics rims/Forge BOV/Fidanza Cam gears/Team RIPP transfer case / Cusco trunk brace/C-west Full CF-GT wing. (Adj.)
|
|
Offline
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
| | 
|
