Who's who and what and where...

[Richard L]

Originally Posted by Yaroslav

Please Help to choose. I have set of 2xM15 nozzles and set of 2xM10 nozzles.
I have AMS KIT. Which set will be better for 35-37psi of boost on 93oct?

I believe the AMS system is a " progressive pump speed" system, without knowing the "start" psi and "end" psi, it is difficult to know exactly how much acohol it is injecting at a given boost.

I understand that you have known size nozzle but the ramping pressure is a bit vague.

Pump pressure - boost pressure = actual injection pressure. If you can obtain terh pumppressure curve, I can help you working out how much stock fuel you need to take out to run your engine properly.

Richard

[Yaroslav]

Thanks Man. But I Believe It`s Unreal For Me

[Mike@Mynes]

Richard,
Great post...very informative. Hopefully we can get the "installation kit" for the Evo's hammered out within the next few weeks and get things rolling.

Cheers.
Mike @ Mynes Performance, Inc.

[LT1runner]

bump for good info.

[Richard L]

Perrin's new progressive water injection system launched at SEMA 2006



Click here

[Richard L]

The Element Hydramist was developed from the beginning to be the ultimate water/methanol injection with uncompromised performance, control, and safety. The Hydramist is a fully integrated water/methanol injection solution controlled via the Hydra EMS. This system allows full 3D mapping of water flow based on load and rpm, automatic map switching, and unparalleled protection never seen before in any water/methanol injection system. When we first set out to develop a water/methanol injection system we discovered very quickly the limitations of most universal systems in that they rarely offered precise control over the injection or the failsafe mechanisms were insufficient at protecting the engine when failure occurred. To help develop a superior system for the Hydra EMS Element Tuning worked with the industry leader in water/methanol injection systems, Aquamist.

I'll continued to add to this first post as time permits.

Here is the Hydramist Installation Guide:

http://www.elementtuning.com/Hydrami...amistguide.htm

Thanks,
Phil
www.elementtuning.com

[Richard L]

System 4U: URD'S Advanced Hi-Flow Water & Methanol Kit

URD has a powerful, full featured methanol and water injection kit utilizing the best and latest Aquamist parts.

This kit is much like the popular Aquamist 2D system, but it also comes with a DDS3, an accumulator, and a high flow pump.

Some Parts Include:

* Latest DDS3 (Junction Box 7A) Kit with Water Level Sensor
* Aquamist High Speed Valve (806-244)
* 150W Pump with 125PSI By-Pass Valve (806-075)
* Water Tank Adaptor (806-270)
* 22cc Surge Arrestor Assembly
* Three Water Jets of Choice
* Aquamist FIA/DDS3 Harness and Pump Harness
* M8 Tap for Water Jet (806-284)
* 4mm Y-Piece (806-261)
* 40A Pump Relay (806-286)
* Stainless 100 Micron Filter (806-257)
* 21 Feet of Nylon Hose (806-266 - 806-261)

This Kit will be Available at an Introductory Price of $899 thru 12/31/2006.
.
.
.

[dank420]

The Element Hydramist was developed from the beginning to be the ultimate water/methanol injection with uncompromised performance, control, and safety. The Hydramist is a fully integrated water/methanol injection solution controlled via the Hydra EMS. This system allows full 3D mapping of water flow based on load and rpm, automatic map switching, and unparalleled protection never seen before in any water/methanol injection system. When we first set out to develop a water/methanol injection system we discovered very quickly the limitations of most universal systems in that they rarely offered precise control over the injection or the failsafe mechanisms were insufficient at protecting the engine when failure occurred. To help develop a superior system for the Hydra EMS Element Tuning worked with the industry leader in water/methanol injection systems, Aquamist.

I'll continued to add to this first post as time permits

how much does that kit cost?