ETS - 3.0" - 3.5" - 4.0" - 5.0" - Intercoolers Ready For Shipment!! Free Shipping!

[ETS Michael]

Hello!

We have a Free Shipping special going on right now! We have all the cores on the shelf ready for shipment!

3.0" - $499.00 Shipped! (ETS Core)
3.5" - $599.00 Shipped! (ETS / Garrett Core)
4.0" - $699.00 Shipped! (ETS / 3.8" Garrett Core)
5.0" - $849.00 Shipped! (ETS Core)

If you want to save some money over the guys selling a similar unit for a higher price! Now is the time! We use a 24" core on our standard unit and 22" on our widetank version. Don't purchase a 20" or 18" core, the first thing you look at when building an intercooler is surface area!!



Thanks,

Michael

[gunhaha]

Is that 3.5" being offered as option of either ETS or Garrett or its all just Garrett core?

[ETS Michael]

I can do either one. I have our cores built on the shelf ready to ship! The garrett core will take a couple days for the core to show up and build it.

Let me know!

Michael

[wtbEVO9]

Quality products at a fair price. Bump for ets!

[borievoinitialD]

Pics and full specs comparing the standard vs widetank versions...

[ETS Michael]

Originally Posted by borievoinitialD

Pics and full specs comparing the standard vs widetank versions...

The ETS Lancer EVO Intercooler is the best on the market, bar none. It features bolt on installation, eliminates the two up-pipes to the intercooler and fills the whole grill with core for a killer look and maximum efficiency. This unit also retains the factory crash bar and splash pans (3" and 3.5"). The kit includes the intercooler, mounting hardware, silicone couplers, and SS T-Bolt Clamps.

The ETS EVO Piping kit is designed to eliminate many of the unnecessary bends in the stock piping. Our piping starts off by immediately expanding into 2.5” diameter right off of the turbo elbow. This replaces the tiny 1 3/4” factory pipe and instantly frees up 15hp and greatly improves spool up. From here it follows the core support and wraps around to mate up to the intercooler. Once the air passes through the intercooler, the piping takes a short direct path around the core support, over the transmission and straight up to the throttle body. This unique routing is over two feet shorter than the stock routing which results in greatly improved spool up and transient response. With an 11% increase in cross sectional area, flow is increased as well.

Check out the features below:

Features:

• Pressure Checked at 35psi
• Brushed Stainless Steel Piping
• Short Route or Stock Battery
• 2.5" or 3.0" Piping
• Bolt on design retains crash beam (3" and 3.5")
• Available in 3.0", 3.5", 4.0", 5.0" and 6.0"
• Fills entire grill with core
• Eliminates excessive piping
• Full Mandrel Bent 2.5" Piping
• Stainless Steel T-Bolt Clamps
• 3-Ply Reinforced Silicone Couplers
• Intercooler kits include the LP2

Evolution 9







Evolution 8





Evolution 8 Anodized (Available In Blue, Red, Black and Gold)



Evolution 9 Anodized (Available In Blue, Red, Black and Gold)



Evolution 8/9 w/ Cusco Power Brace



4.0" Intercooler Review w/ Dyno Graph (Done By TTP):

TTP's Dynotesting of the 4" ETS FMIC vs. STOCK 3" on FPHTA86, results inside!

Intercooler Only Prices

• 3.0" - $499.00
• 3.5" - $599.00
• 4.0" - $699.00
• 5.0" - $849.00
• 6.0" - $999.00

Intercooler Kit Prices

• 3.0" - Starting at $943.95
• 3.5" - Starting at $1043.95
• 4.0" - Starting at $1143.95
• 5.0" - Starting at $1293.95
• 6.0" - Starting at $1443.95

We are currently offering FREE shipping on any intercooler in stock, ready for shipment!


Thanks,

Michael

[ETS Michael]

The main difference between wide and standard.

Wide = 22" wide core (Same size opening as the evo 9 bumper)

Std = 24" wide core (works on 9, but fills more of the grill on the large 8 opening.) - Largest size core you can fit on the 8/9 with stock crash beam.

Thanks!

Michael

[dsm25psi]

Best intercoolers on the market

[ETS Michael]

Here are some pics of the 5.0" unit.

[EvoG8r]

My 3" ETS helped me gain around 20whp with my tune. Good product.

[Peteypab2133]

Here are a few pics of my IX when i had my rare 4.5" ETS FMIC... loved it!

[ETS Michael]

Looking Good!



6.0" Intercooler Installed.

[Creamo3]

What's involved to run the 5"? I don't have a crash beam or splash shield, any bumper trimming needed?

[ETS Michael]

You will have trimming on the front bumper cover fascia. The picture above is a 6.0"

Thanks!

Michael

[dsm25psi]

we installed the 5" today, the front bumper needs to be trimmed a little and thats it.