Shearer Manifolds 02 Dump RELEASED!!!

Mike@AwdMotorsports · Jul 14, 2009, 01:12 PM

I want to take a minute to show you guys the newest 02 Dump available on the market.. This was designed by Shearer with our help to make 1 dump that fits all LICP.. There is nothing worse than trying to manipulate an 02 dump to fit while on the car.. This is a high quality piece and we have taken into consideration all aspects of the Dump to insure the most power is extracted.. If you notice the Wastegate side is ported Properly to Eliminate Boost creep along with the piping being stepped up slightly coming off the flange.. The attention to detail is where the $$$ invested in the piece is at..

This is not meant to be a For Sale ad.. Its meant to just show a new product available on the market to our Members.. I know people are going to ask how much it is so ill list the intro pricing here.. 475.00 shipped..

I know many of the people i have spoken with have commented on the pricing but you must take a few things into consideration.. The previously available dump from EPM was 275.00 and they were not making any money and were forced to close.. Considering that this piece gains down low in spool and ~20hp on top is similar to that of the gains you get from cams which are 500+.. So 1.00 for 1.00 the gains are there for the $$$ IMO..

Mike

W2J · Jul 14, 2009, 01:37 PM

^^ sold!!!!!!!!!!!!!!!!!

erald01 · Jul 14, 2009, 01:39 PM

nice design, but a little on the expensive side, and cams are def not $500+ unless you get HKS

06MREvo · Jul 14, 2009, 01:41 PM

Interesting how they welded the bottom flange to the dump tube...I understand the R&D but price seems a bit high in my opinion...glad I got my EPM dump a year ago...Bump for a new product though!

TheDream · Jul 14, 2009, 01:41 PM

I have HKS 280/280 and I only spent around 400.00 for them

Mike@AwdMotorsports · Jul 14, 2009, 01:43 PM

Quote:

Originally Posted by erald01

nice design, but a little on the expensive side, and cams are def not $500+ unless you get HKS

How much are Kelford 272's for evo 8 and IX?? How much are GSC cams?? How much are cosworth cams?? I havent found any under 500 myself..

it was an example as far as 1.00/HP.. How about Blow off valves that are 195.00 and gain 0 HP??

project_skyline · Jul 14, 2009, 01:44 PM

Quote:

Originally Posted by erald01

nice design, but a little on the expensive side, and cams are def not $500+ unless you get HKS

Wrong!

GSC, kelford, and cosworth are all in the 500 range.

Thats one BA unit. Shearer doesn't mess around with exhaust manifolds and what not lol.

I might consider this instead of the MAP 02 eliminator i was looking at.

W2J · Jul 14, 2009, 01:47 PM

That thing is so sexy I don't care about the price and of course you getting what you pay for shearer quality, now I will be only person in Trinidad with it both on my car and in my shop!!!

ForcedFedRS · Jul 14, 2009, 01:50 PM

Why all the hate comments on pricing? It's a nice piece with some R&D behind it.

erald01 · Jul 14, 2009, 01:50 PM

i had a shearer manifold before and they do a great work on them

Mike@AwdMotorsports · Jul 14, 2009, 01:54 PM

Quote:

Originally Posted by Jason@Synaptic3

Why all the hate comments on pricing? It's a nice piece with some R&D behind it.

Thanks for the support!!

I assumed this would happen.. Reason being is that everyone was used to 275.00 02 dumps from EPM.. Its quite obvious with the portwork done to this there is much more time invested.. Not to mention EPM has publicly stated they were not making any $$$ on the dumps and were forced to close due to the Loss.. The materials are not cheap.. I would assume if EPM ever returned the Dump would be much more than 275.00 now too if they plan to stay open..

Thanks!!

Mike

Mike@AwdMotorsports · Jul 14, 2009, 02:03 PM

Quote:

Originally Posted by Jason@Synaptic3

Why all the hate comments on pricing? It's a nice piece with some R&D behind it.

Quote:

Originally Posted by project_skyline

Wrong!

GSC, kelford, and cosworth are all in the 500 range.

Thats one BA unit. Shearer doesn't mess around with exhaust manifolds and what not lol.

I might consider this instead of the MAP 02 eliminator i was looking at.

I was starting to wonder what cams are under 500 Brand NEW.. Thanks for posting!!

Mike

Mike@AwdMotorsports · Jul 14, 2009, 02:04 PM

Quote:

Originally Posted by TheDream

I have HKS 280/280 and I only spent around 400.00 for them

Brand new?? Im sure if you buy this used 2nd hand itll be less than 400.00 also..

Mike

EnjoyDriving · Jul 14, 2009, 02:05 PM

Quote:

Originally Posted by project_skyline

Wrong!

GSC, kelford, and cosworth are all in the 500 range.

Thats one BA unit. Shearer doesn't mess around with exhaust manifolds and what not lol.

I might consider this instead of the MAP 02 eliminator i was looking at.

What is the difference between the MAP 02 eliminator and this one?? In fact, the MAP 02 does come with coating too!? I am still debating between a ported O2 housing ($100+/-) and a O2 dump($200+) for DD only

Nevertheless, thanks for showing us the new product

Mike@AwdMotorsports · Jul 14, 2009, 02:09 PM

Quote:

Originally Posted by EnjoyDriving

What is the difference between the MAP 02 eliminator and this one?? In fact, the MAP 02 does come with coating too!? I am still debating between a ported O2 housing ($100+/-) and a O2 dump($200+) for DD only

Nevertheless, thanks for showing us the new product

I cannot comment on Map's 02 as i have never used it 1st hand or even seen it in person.. I was told its Mild Steel.. Maybe thats why they coat it.. We have sold and done as much or more testing on o2 dumps before we released this dump.. I am confident it doesnt boost creep and makes power..

Mike