Mark this thread as Unsold
FS: Evo 9 Brembo, EBC Redstuff Pads, Cryo'd Rotorpros Slotted front rotors
Jan 1, 2014, 08:23 PM
#1
FS: Evo 9 Brembo, EBC Redstuff Pads, Cryo'd Rotorpros Slotted front rotors
I am putting up for sale my old front brake kit. I recently swapped over to a small front brake kit to fit 15" gravel wheels and tires and I no longer need these. As far as condition they were in perfect working order when I removed them. Their clear coat is a bad though and could really use a respray. Originally I was planning on repainting them but then I switched tracks and ended up going with the small brake kit.
The brakes have about 45k miles on them, the rotors and pads have about 6k miles on them. Before I installed the rotors I had them cryogenically treated as well.
Rotors are Rotorpro slotted rotors, pads are EBC redstuff.
Asking $500 shipped for everything, obo.
Update:
I gave the calipers a bit of TLC, most of the paint is actually in great condition with only a couple of chips on the back side, and the clear peeling on the front. I also forgot I had a set of OEM rotors that I had turned when I swapped them out for the slotted ones. They still have a decent amount of meat on them. They are the original rotors that were on the car when I bought them so they should have roughly 40k miles and 1 turning. I also found the high temp vynil decals that I bought when I was going to repaint the calipers. I'll toss those in to whoever buys the calipers.
The brakes have about 45k miles on them, the rotors and pads have about 6k miles on them. Before I installed the rotors I had them cryogenically treated as well.
Rotors are Rotorpro slotted rotors, pads are EBC redstuff.
Asking $500 shipped for everything, obo.
Update:
I gave the calipers a bit of TLC, most of the paint is actually in great condition with only a couple of chips on the back side, and the clear peeling on the front. I also forgot I had a set of OEM rotors that I had turned when I swapped them out for the slotted ones. They still have a decent amount of meat on them. They are the original rotors that were on the car when I bought them so they should have roughly 40k miles and 1 turning. I also found the high temp vynil decals that I bought when I was going to repaint the calipers. I'll toss those in to whoever buys the calipers.
Last edited by vortico; Jan 8, 2014 at 05:48 PM. Reason: updates
Jan 8, 2014, 05:28 PM
#7
heh the two shocks are being sent to Bilstein in a bit... bought them here and one was blown so I'm getting them both fixed and revalved.
Rotors are pending. I do have OEM rotors I need to get down and measure. they were turned when i took them off.
Rotors are pending. I do have OEM rotors I need to get down and measure. they were turned when i took them off.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
vortico
For Sale - Suspension / Brakes / Handling
1
Mar 28, 2015 08:00 PM