Mark this thread as Unsold
FS: QTP | Hallman | Forge | OEM MAF & Recirc Pipe
#1
FS: QTP | Hallman | Forge | OEM MAF & Recirc Pipe
IF INTERESTED, MAKE OFFER VIA PM
Hallman MBC Black sold - Used for less than 300 miles with no issues
Forge RS w/ Vent to Atmosphere Kit sold
Muse Upper Intercooler Piping Piping Stock Route sold - - Used for less than 300 miles
Perrin Intake Kit sold - Basically new, used for less than 300 miles, filter is still oily from original packaging
QTP 3" Electronic Cutout w/ Test Pipe sold - I've had this on the car for 3 years and approx 10,000 miles. I've had 0 issues with it during that time. I'll include the toggle switch as well as the wiring needed to install this. I originally bought the 3" Electronic cutout with Y pipe and had my friend weld it into a test pipe I had. This is meant to replace the stock CAT and will bolt right up. I was lowered on Tanabe GF210 springs and as you can see scraped up the bottom of the cutout a tad. Doesn't affect the performance a bit though. It dosen't even scrape over speed bumps now since it's worn down a bit. The last picture is what it would looked bolted up under the EVO.
OEM IX MAF sold - Used for over 45k on my EVO IX, no problems just switching to SD
OEM Recirculated Piping for BOV $30 shipped - Includes worm clamps as well!
Last edited by mx4life85; Mar 14, 2013 at 06:50 AM.