Mark this thread as Unsold
Insanely huge part-out, over 30k invested, all custom parts, UNIQUE AND CUSTOM!
Feb 26, 2012, 03:27 AM
#1
Newbie
Thread Starter
iTrader: (10)
Join Date: Dec 2009
Location: Fresno CA
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Insanely huge part-out, over 30k invested, all custom parts, UNIQUE AND CUSTOM!
UPDATED PICS OF TURBO KIT ON PAGE 2
The time has come, its been 3 years building it, and one hell of a rollercoaster of life happening. Twin boys, new Dyno at the shop, and just now got a house, life is too crazy to keep up with a car like this. I thought about it long and hard, and realized this car is just going to cost me money for the rest of my life and could quite possibly get me into a lot of trouble. Kindve funny but its the truth! Everything literally has less than a mile on it, Car still turns on right now as we speak, mostly everything was purchased brand new, the only thing i can think of that wasnt new is the longblock core itself, the Cosworth M2 Cams, and the turbo manifold in which is basically new again.
When i inquired about getting it tuned by Sean@FFTec he decided to drive down to Fresno and check it out himself, so i'll hit him up he should be able to vouch for it lol. He flashed it himself and gave me a nice start up calibration just to make sure everything was in order, the only thing holding me back from tuning was that he recommended i upgrade all my vacuum lines since we were looking at extreme boost.
Local Pick up preferred! but i am willing to ship anything, i've decided that i have to take this part out very seriously as it will in turn bring my family a lot of money back that i have wasted on this project. I will do my absolute best to get everything out on time and very timely!
Text preferred or private message
559-326-3621
It is hard to put a price on anything as of right now, so please let me know your offers, I will not part out the turbo kit, and will only sell it as a whole, as EVERYTHING is custom!
Just a reminder, EVERYTHING IS LITERALLY BRAND NEW, TOTAL RUN TIME OF PROBABLY 30 MINUTES! From fuel setup, to turbo set up, to suspension!
Mod List
Original Evo 9 Longblock that came with vehicle, originally 45,000 miles
(Please note i had the complete longblock blueprinted and assembled by a Master Engine Tech by the name of Doug Rylee (Owner of well known local shop Doug Rylee Performance) Receipts of all his work is on hand (about $1000+ in just man hours)
Updated with a vid. Its so sad for me to part ways with it..
http://www.youtube.com/watch?v=mZRy0Q89dtQ&sns=em
EVERYTHING IN BOLD IS SOLD
SOLD and SHIPPED
FUEL SET UP SOLD!!
-Full Blown dual pumper hanger SOLD
-Dual Walboro 255 modified high pressure fuel pumps SOLD
-Custom Hobbs switch 5 psi activation SOLD
- -10 fuel feed from tank with XRP Fittings SOLD
-AEM fuel rail SOLD
-STM -10 fuel rail adapters SOLD
-Edelbrock Fuel Pressure Regulator SOLD
-XRP fuel pressure gauge SOLD
-XRP 50 Micron Fuel Filter (steel mesh for race gas) SOLD
- -6 fuel return line straight to tank SOLD
-Fuel Injector Clinic 2150cc injectors SOLD
-Complete custom dual relay set up straight from battery for fuel pumps SOLD
-Boomba throttle body 75 mm completely port matched---SOLD
-EVO9 GSR 5 speed transmission---SOLD
-STM clutch stopper SOLD
IGNITION SET UP- SOLD
-Spoolinup coil on plug conversion kit
-Carbon fiber version
-Custom Sleeved with Raychem Shrink
Suspension
-AWDMotorsports D2 Drag dampers-SOLD
-AMS Small Battery Bracket SOLD
Complete interior with doorpanels, floor mats
Front and rear bumpers
-Cusco Reanodized Teal Asking 120 Shipped
Custom Taillights
Carbon Fiber Dash Trims
LONGBLOCK SOLD AND GONEEEE
Now, i am looking to sell the longlock together, I am thinking of 4k Shipped NO LESS. Over 10k has been invested, and you will get everything listed, will be a complete turnkey longblock
HEAD
-EVO 9 Mivec Head
-KBR Performance Stage 3 Port and Polished head
-Doug Rylee Performance 5 angle valve job
-Supertech Valvesprings/Retainers
-Cosworth M2 272 Camshafts
-Tomei Camgear custom anodized purple/teal (HKS Style)
-Custom Vacuumed Catch Can Setup
-Custom powercoated EVO 9 valve cover (purple)
-Custom modified fittings-12 breathers infront of valve cover (Anodized Purple)
-Magnus intake manifold (with velocity stacks inside) custom powercoated purple
-Magnus thermal intake manifold spacer
-Buschur valve cover bolt kit
BLOCK SOLDDDDD
-EVO 9 block
-Balanced Rotating assembly
-ACL race bearings
-Modified oem oil pump
-Buschur balancer shaft eliminator
-Crower I beam rods
-New OEM Water pump
-Manley Buschur spec pistons
-Manley upgraded wrist pins
-85.5 mm overbore
-ARP L19 Head Studs
-HKS timing belt
-OEM head gasket
TRANSMISSION SOLDDDDDD
-Exedy triple plate clutch Asking 1400 Shipped NO LESS, 30 minutes of run time
-Goodyear braided clutch line
PENDING
Innovative Mounts (Steel) Comes with 2 sides and front, they decided not to make the rear as it will be too harsh, these mounts feel great! Asking 220 Shipped With Street Inserts, has 2 sides and front.
-Blox Vacuum Block
-EVO9 HEADLIGHTS
PENDING
COOLING
-Mishimoto Civic radiator
-Custom re-welded inlets and outlets to suite the EVO
-Slimfan.com 1300CFM Slim radiator fan (pusher)
-OEM Fan Speed controller still utilized
-Custom Samco/Mishimoto Radiator hoses
PENDING
ENGINE MANAGEMENT Planning to include this to purchaser of Turbo Kit
-Sean@FFTec flash
-Custom speed density conversion
-GM intake air temperature sensor
-Omnipower 4 bar map sensor
PENDING
TURBO SET UP Asking 4k Shipped NO LESS, probably the only turbo kit of this kind in the world, it has been custom designed and fabricated on my vehicle, i am NOT parting anything out, it will be a complete TURNKEY Turbo kit with Radiator hoses, radiator, 1300CFM Slim fan also included to make this a bolt on kit. This Kit allowed full spool around 5500 on my 2.0. Everything is literally brand new
PENDING
TURBO KIT IS AC COMPATIBLE!!!
-HKC Equal Length, top mount, twin scroll, turbo manifold, custom jet coated
-Borg Warner Divided T4 s363 turbo
-Custom V-band 4 inch downpipe with 02 bung and incorporated catch can check valve downstream
-Complete vibrant 3 inch intercooler aluminum piping
-Custom bead rolled
-Vibrant 3 inch couplers
-Vibrant 3 inch t-bolts
-Buschur "race" front mount intercooler 4 core
-Welded GM IAT Bung on UICP
-Tial Alpha-Q blow off valve custom anodized teal and purple
-Tial 44mm V-Band Wastegate custom anodized purple
-ExtremePSI -4 oil feed line
-ExtremePSI -10 steel braided oil return line with flanges
-ExtremePSI Oil feed Flange
-ExtremePSI Oil Return Flange
Probably the only thing still for sale
EXHAUST Asking 800 Shipped for everything, race muffler and StealhWORKS Included
-4 Inch downpipe
-Works Racing Exhale 3inch exhaust system (for JDM rear bumper) - WORKS Racing StealthWORKS muffler. (So theres 2 mufflers, a race one. And a quieter version. Both are WORKS
VEHICLE IS BEING PARTED OUT, IF IT IS NOT LISTED IN "SOLD" THEN I STILL HAVE IT!
The time has come, its been 3 years building it, and one hell of a rollercoaster of life happening. Twin boys, new Dyno at the shop, and just now got a house, life is too crazy to keep up with a car like this. I thought about it long and hard, and realized this car is just going to cost me money for the rest of my life and could quite possibly get me into a lot of trouble. Kindve funny but its the truth! Everything literally has less than a mile on it, Car still turns on right now as we speak, mostly everything was purchased brand new, the only thing i can think of that wasnt new is the longblock core itself, the Cosworth M2 Cams, and the turbo manifold in which is basically new again.
When i inquired about getting it tuned by Sean@FFTec he decided to drive down to Fresno and check it out himself, so i'll hit him up he should be able to vouch for it lol. He flashed it himself and gave me a nice start up calibration just to make sure everything was in order, the only thing holding me back from tuning was that he recommended i upgrade all my vacuum lines since we were looking at extreme boost.
Local Pick up preferred! but i am willing to ship anything, i've decided that i have to take this part out very seriously as it will in turn bring my family a lot of money back that i have wasted on this project. I will do my absolute best to get everything out on time and very timely!
Text preferred or private message
559-326-3621
It is hard to put a price on anything as of right now, so please let me know your offers, I will not part out the turbo kit, and will only sell it as a whole, as EVERYTHING is custom!
Just a reminder, EVERYTHING IS LITERALLY BRAND NEW, TOTAL RUN TIME OF PROBABLY 30 MINUTES! From fuel setup, to turbo set up, to suspension!
Mod List
Original Evo 9 Longblock that came with vehicle, originally 45,000 miles
(Please note i had the complete longblock blueprinted and assembled by a Master Engine Tech by the name of Doug Rylee (Owner of well known local shop Doug Rylee Performance) Receipts of all his work is on hand (about $1000+ in just man hours)
Updated with a vid. Its so sad for me to part ways with it..
http://www.youtube.com/watch?v=mZRy0Q89dtQ&sns=em
EVERYTHING IN BOLD IS SOLD
SOLD and SHIPPED
FUEL SET UP SOLD!!
-Full Blown dual pumper hanger SOLD
-Dual Walboro 255 modified high pressure fuel pumps SOLD
-Custom Hobbs switch 5 psi activation SOLD
- -10 fuel feed from tank with XRP Fittings SOLD
-AEM fuel rail SOLD
-STM -10 fuel rail adapters SOLD
-Edelbrock Fuel Pressure Regulator SOLD
-XRP fuel pressure gauge SOLD
-XRP 50 Micron Fuel Filter (steel mesh for race gas) SOLD
- -6 fuel return line straight to tank SOLD
-Fuel Injector Clinic 2150cc injectors SOLD
-Complete custom dual relay set up straight from battery for fuel pumps SOLD
-Boomba throttle body 75 mm completely port matched---SOLD
-EVO9 GSR 5 speed transmission---SOLD
-STM clutch stopper SOLD
IGNITION SET UP- SOLD
-Spoolinup coil on plug conversion kit
-Carbon fiber version
-Custom Sleeved with Raychem Shrink
Suspension
-AWDMotorsports D2 Drag dampers-SOLD
-AMS Small Battery Bracket SOLD
Complete interior with doorpanels, floor mats
Front and rear bumpers
-Cusco Reanodized Teal Asking 120 Shipped
Custom Taillights
Carbon Fiber Dash Trims
LONGBLOCK SOLD AND GONEEEE
Now, i am looking to sell the longlock together, I am thinking of 4k Shipped NO LESS. Over 10k has been invested, and you will get everything listed, will be a complete turnkey longblock
HEAD
-EVO 9 Mivec Head
-KBR Performance Stage 3 Port and Polished head
-Doug Rylee Performance 5 angle valve job
-Supertech Valvesprings/Retainers
-Cosworth M2 272 Camshafts
-Tomei Camgear custom anodized purple/teal (HKS Style)
-Custom Vacuumed Catch Can Setup
-Custom powercoated EVO 9 valve cover (purple)
-Custom modified fittings-12 breathers infront of valve cover (Anodized Purple)
-Magnus intake manifold (with velocity stacks inside) custom powercoated purple
-Magnus thermal intake manifold spacer
-Buschur valve cover bolt kit
BLOCK SOLDDDDD
-EVO 9 block
-Balanced Rotating assembly
-ACL race bearings
-Modified oem oil pump
-Buschur balancer shaft eliminator
-Crower I beam rods
-New OEM Water pump
-Manley Buschur spec pistons
-Manley upgraded wrist pins
-85.5 mm overbore
-ARP L19 Head Studs
-HKS timing belt
-OEM head gasket
TRANSMISSION SOLDDDDDD
-Exedy triple plate clutch Asking 1400 Shipped NO LESS, 30 minutes of run time
-Goodyear braided clutch line
PENDING
Innovative Mounts (Steel) Comes with 2 sides and front, they decided not to make the rear as it will be too harsh, these mounts feel great! Asking 220 Shipped With Street Inserts, has 2 sides and front.
-Blox Vacuum Block
-EVO9 HEADLIGHTS
PENDING
COOLING
-Mishimoto Civic radiator
-Custom re-welded inlets and outlets to suite the EVO
-Slimfan.com 1300CFM Slim radiator fan (pusher)
-OEM Fan Speed controller still utilized
-Custom Samco/Mishimoto Radiator hoses
PENDING
ENGINE MANAGEMENT Planning to include this to purchaser of Turbo Kit
-Sean@FFTec flash
-Custom speed density conversion
-GM intake air temperature sensor
-Omnipower 4 bar map sensor
PENDING
TURBO SET UP Asking 4k Shipped NO LESS, probably the only turbo kit of this kind in the world, it has been custom designed and fabricated on my vehicle, i am NOT parting anything out, it will be a complete TURNKEY Turbo kit with Radiator hoses, radiator, 1300CFM Slim fan also included to make this a bolt on kit. This Kit allowed full spool around 5500 on my 2.0. Everything is literally brand new
PENDING
TURBO KIT IS AC COMPATIBLE!!!
-HKC Equal Length, top mount, twin scroll, turbo manifold, custom jet coated
-Borg Warner Divided T4 s363 turbo
-Custom V-band 4 inch downpipe with 02 bung and incorporated catch can check valve downstream
-Complete vibrant 3 inch intercooler aluminum piping
-Custom bead rolled
-Vibrant 3 inch couplers
-Vibrant 3 inch t-bolts
-Buschur "race" front mount intercooler 4 core
-Welded GM IAT Bung on UICP
-Tial Alpha-Q blow off valve custom anodized teal and purple
-Tial 44mm V-Band Wastegate custom anodized purple
-ExtremePSI -4 oil feed line
-ExtremePSI -10 steel braided oil return line with flanges
-ExtremePSI Oil feed Flange
-ExtremePSI Oil Return Flange
Probably the only thing still for sale
EXHAUST Asking 800 Shipped for everything, race muffler and StealhWORKS Included
-4 Inch downpipe
-Works Racing Exhale 3inch exhaust system (for JDM rear bumper) - WORKS Racing StealthWORKS muffler. (So theres 2 mufflers, a race one. And a quieter version. Both are WORKS
VEHICLE IS BEING PARTED OUT, IF IT IS NOT LISTED IN "SOLD" THEN I STILL HAVE IT!
Last edited by ASPerformance; Mar 4, 2012 at 04:46 AM.
Feb 26, 2012, 03:36 AM
#5
Newbie
Thread Starter
iTrader: (10)
Join Date: Dec 2009
Location: Fresno CA
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Hopefully there is no confusion as far as the pictures, please note that these have been taken randomly for the last 3 years, so basically it went through many different phases, the final mod list detailed is exactly what it has now.
Trending Topics
Feb 27, 2012, 07:15 PM
#12
Newbie
Thread Starter
iTrader: (10)
Join Date: Dec 2009
Location: Fresno CA
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Note. This is the first start up in about 6 months. Plus the angle of the car, it wasnt happy trying to start up lol. This motor has ZERO LEAKS AND ZERO SMOKE
Towed the car from my shop to my house. That way it is closer to me to provide pictures and instant work when something is sold!
http://www.youtube.com/watch?v=2PksCjxZMFo&sns=em
Towed the car from my shop to my house. That way it is closer to me to provide pictures and instant work when something is sold!
http://www.youtube.com/watch?v=2PksCjxZMFo&sns=em
