NEW PROJECT: SR20det 510!
#1
Evolved Member
Thread Starter
iTrader: (8)
Join Date: Nov 2004
Location: sacramento ca
Posts: 1,062
Likes: 0
Received 0 Likes
on
0 Posts
NEW PROJECT: SR20det 510!
~*~*~*~*~UPDATE!!!!!!!~*~*~*~
OKaaaaay here you guys go-
Sorry for the long delay in updates! 411- everything is done, motor runs all thats left is;
-Dyno Tune
-Catback fabbed
-Door pannels put on
-Finish trunk inside
-Fiberglass kickpannels
I took alot of pics to make up for all the ones Ive missed during the build hehe. Let me know if you have any questiions! ENJOI!!!!!!!!
whats up guys..havent posted here in a while. After I sold the evo I have been needing a side project to ocupy my time. Well here is my new monster(soon) let me know what you think!:
DIARY;
Picked up first day:
ORIGINAL OWNER, grandma car not a TOUCH of rust or BONDO!! Few dings..but cant complain its 35 years old!
Perfect project. Only problem its automatic. NO worries though..i Have a donor tranny/engine.
Still has spare tire/mat, all original rubber datsun floor mats, and the AM radio still blasted loud! SCORE
Second day;
Gutted interior/glass/chrome trim etc.
Thats right...92 earth shaking hp!!
FMIC fitted..SUCH A TIGHT FIT!@
Donor Car;(blacktop s13 240sx)
Donor motor pulled and cleaned;
Stock L-series motor yanked and all engine bay MISC holes welded up and shaved down.(going for a CLEAN? look..no wires/lines/etc? visable)
Front SR motor/tranny x-member, steering linkage, poly bushings etc. All needed for a clean look and better steering repsonse/handling.
NEW PARTS that will be going on this project;
Greddy intake manifold;
Tial 38mm;
Sard fuel rail;
Sard FPR;
Sard BOV;
T3/T4 exhaust manifold.(need to be log style to clear the steering;
Nardi wheel with quick release;
New rollers; volk ce28 16X7
Along with rubber..gotta stay protected! falken rt-615
Bride gias;
Laying out how the rear seats will look;
Garrett GT30R;
More pics as I get updated with parts and progress on the body. Also have a brembo 4 wheel disc brake system coming..and then down to the suspension shop for custom coilovers. I am still deciding on paint color...and debating over BMW m3 "laguna seca blue" or Infinity g35 "carrabian blue" and opinons would be appreciated. Goal is around 350-400whp...(in a car that weighs 1900-2000lbs) r180 LSD diff and custom shorted driveshafted, full defi gauges with tach, full bride interior, etc. No corners cut on this project..the best of the best parts! Thanks guys...stay tuned as this project unfolds..
OKaaaaay here you guys go-
Sorry for the long delay in updates! 411- everything is done, motor runs all thats left is;
-Dyno Tune
-Catback fabbed
-Door pannels put on
-Finish trunk inside
-Fiberglass kickpannels
I took alot of pics to make up for all the ones Ive missed during the build hehe. Let me know if you have any questiions! ENJOI!!!!!!!!
whats up guys..havent posted here in a while. After I sold the evo I have been needing a side project to ocupy my time. Well here is my new monster(soon) let me know what you think!:
DIARY;
Picked up first day:
ORIGINAL OWNER, grandma car not a TOUCH of rust or BONDO!! Few dings..but cant complain its 35 years old!
Perfect project. Only problem its automatic. NO worries though..i Have a donor tranny/engine.
Still has spare tire/mat, all original rubber datsun floor mats, and the AM radio still blasted loud! SCORE
Second day;
Gutted interior/glass/chrome trim etc.
Thats right...92 earth shaking hp!!
FMIC fitted..SUCH A TIGHT FIT!@
Donor Car;(blacktop s13 240sx)
Donor motor pulled and cleaned;
Stock L-series motor yanked and all engine bay MISC holes welded up and shaved down.(going for a CLEAN? look..no wires/lines/etc? visable)
Front SR motor/tranny x-member, steering linkage, poly bushings etc. All needed for a clean look and better steering repsonse/handling.
NEW PARTS that will be going on this project;
Greddy intake manifold;
Tial 38mm;
Sard fuel rail;
Sard FPR;
Sard BOV;
T3/T4 exhaust manifold.(need to be log style to clear the steering;
Nardi wheel with quick release;
New rollers; volk ce28 16X7
Along with rubber..gotta stay protected! falken rt-615
Bride gias;
Laying out how the rear seats will look;
Garrett GT30R;
More pics as I get updated with parts and progress on the body. Also have a brembo 4 wheel disc brake system coming..and then down to the suspension shop for custom coilovers. I am still deciding on paint color...and debating over BMW m3 "laguna seca blue" or Infinity g35 "carrabian blue" and opinons would be appreciated. Goal is around 350-400whp...(in a car that weighs 1900-2000lbs) r180 LSD diff and custom shorted driveshafted, full defi gauges with tach, full bride interior, etc. No corners cut on this project..the best of the best parts! Thanks guys...stay tuned as this project unfolds..
Last edited by onesicklambo; Oct 14, 2007 at 07:21 PM.
Trending Topics
#11
Evolved Member
Thread Starter
iTrader: (8)
Join Date: Nov 2004
Location: sacramento ca
Posts: 1,062
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys! Ya one big reason for this build was SMOG-exempt!!! F the police: Also my budget is 20. I am starting to come close and will probably go over after paint and upholstry Ya Scorke I like the r34 blue..but I wanted more of a lighter shade(g35 blue). The Laguna seca blue is too dull after looking at it IMO. no depth to the paint