Mark this thread as Unsold
FS: RnR GT35R Kit & PTE FMIC & Lots of Goodies! ^.^
Nov 16, 2005, 02:08 PM
#1
Evolved Member
Thread Starter
iTrader: (7)
Join Date: Feb 2005
Location: Atlanta, Ga
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
FS: RnR GT35R Kit & PTE FMIC & Lots of Goodies! - LOWERED PRICES!
^.^ * S O L D * ^.^
ALL PRICES HAVE BEEN DROPPED SIGNIFICANTLY, FIRST PERSON TO PM ME SAYING THEY WILL BUY THE TURBO KIT OR EVERYTHING WILL TAKE HOME A GREAT DEAL!
Everything is priced to move ASAP. If anyone is worried I may scam them or they may have a bad experience from buying something high dollar from me, please know that I've done many transactions on EvoM without any problems from me and you have nothing to worry about.
I recently purchased a used RnR GT35R kit in hopes of installing it soon... however, due to a recent accident, I am forced to sell this kit to recover from my losses. I would prefer to sell the whole kit, including all hard pipes and FMIC, all together... but I will part it out if needed.
Kit was used for about 5,000 miles I believe before I purchased it. I never installed the kit, only got to stare at it.
Please PM me SERIOUS offers on the kit or individual parts. If my PM box is full, feel free to email me @ ct9agsr@gmail.com or AIM me @ ct9a gsr and leave a message. Please, no low-ballers... appreciate your time so please appreciate mine.
I will deliver or meet someone locally if it is in reasonable range.
Thanks for your interest.
PTE GT35R (comes w/ a steel braided oil line and uses stock lines too):
RnR Exhaust Manifold w/ Tial 38mm wastegate & steel external dump tube (manifold is tapped for an EGT sensor):
RnR O2-Delete 3" Downpipe w/ 3" test pipe & flex pipe (tapped for O2 sensor):
PTE FMIC (polished front end tanks):
Steel I/C Lower Pipes:
RnR Steel Upper I/C Pipe w/ GReddy Flange welded (tapped for methanol/alky/nitrous injection and IAT sensor):
RnR Steel Upper Radiator Coolant Pipe:
PTE GT35RLE Engraving:
PTE GT35R Exhaust Housing:
If you have any questions, PLEASE feel free to ask. I will do my best to answer them as soon as possible. Thank for your interest and sorry if you're on a 56K modem. =]
ALL PRICES HAVE BEEN DROPPED SIGNIFICANTLY, FIRST PERSON TO PM ME SAYING THEY WILL BUY THE TURBO KIT OR EVERYTHING WILL TAKE HOME A GREAT DEAL!
Everything is priced to move ASAP. If anyone is worried I may scam them or they may have a bad experience from buying something high dollar from me, please know that I've done many transactions on EvoM without any problems from me and you have nothing to worry about.
I recently purchased a used RnR GT35R kit in hopes of installing it soon... however, due to a recent accident, I am forced to sell this kit to recover from my losses. I would prefer to sell the whole kit, including all hard pipes and FMIC, all together... but I will part it out if needed.
Kit was used for about 5,000 miles I believe before I purchased it. I never installed the kit, only got to stare at it.
Please PM me SERIOUS offers on the kit or individual parts. If my PM box is full, feel free to email me @ ct9agsr@gmail.com or AIM me @ ct9a gsr and leave a message. Please, no low-ballers... appreciate your time so please appreciate mine.
I will deliver or meet someone locally if it is in reasonable range.
Thanks for your interest.
PTE GT35R (comes w/ a steel braided oil line and uses stock lines too):
RnR Exhaust Manifold w/ Tial 38mm wastegate & steel external dump tube (manifold is tapped for an EGT sensor):
RnR O2-Delete 3" Downpipe w/ 3" test pipe & flex pipe (tapped for O2 sensor):
PTE FMIC (polished front end tanks):
Steel I/C Lower Pipes:
RnR Steel Upper I/C Pipe w/ GReddy Flange welded (tapped for methanol/alky/nitrous injection and IAT sensor):
RnR Steel Upper Radiator Coolant Pipe:
PTE GT35RLE Engraving:
PTE GT35R Exhaust Housing:
If you have any questions, PLEASE feel free to ask. I will do my best to answer them as soon as possible. Thank for your interest and sorry if you're on a 56K modem. =]
Last edited by ct9a gsr; Dec 18, 2005 at 03:45 PM. Reason: Lowered Prices!
Nov 17, 2005, 09:59 AM
#7
Evolved Member
Thread Starter
iTrader: (7)
Join Date: Feb 2005
Location: Atlanta, Ga
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
I purchased the turbo from a very reputable shop with one of the highest whp Evo8's in the world... also a vendor/sponsor of this site.
I'll get to the bottom of this and make sure this is a GT35R before I sell it.
If anyone can aid me and send me pictures of a 50 trim compared to a 35R, let me know.
Also, are all 50 trim's exhaust housings bolt to a 5-bolt downpipe/o2 housing and 35R's are all 4-bolt downpipe/o2 housing?
I'll get to the bottom of this and make sure this is a GT35R before I sell it.
If anyone can aid me and send me pictures of a 50 trim compared to a 35R, let me know.
Also, are all 50 trim's exhaust housings bolt to a 5-bolt downpipe/o2 housing and 35R's are all 4-bolt downpipe/o2 housing?
Trending Topics
Nov 17, 2005, 10:07 AM
#8
Evolved Member
iTrader: (34)
Join Date: May 2005
Location: The burbs of our nation's capital
Posts: 1,183
Received 0 Likes
on
0 Posts
All PTE turbos are stamped......where it's taped up on your photo is where the stamp is for example mine says "GT35RLSPS" .Anyway sorry you have to sell...........that sh*t sucks a$$
Last edited by Torre from Va.; Nov 18, 2005 at 04:09 AM.
Nov 17, 2005, 12:26 PM
#9
Evolved Member
Thread Starter
iTrader: (7)
Join Date: Feb 2005
Location: Atlanta, Ga
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
The compressor housing is stamped with "GT35RLE" on the outlet.
The exhaust housing is a .63 A/R.
I am very confident I am selling a GT35R. I will post pictures of "GT35RLE" markings as soon as my FTP starts to work.
The exhaust housing is a .63 A/R.
I am very confident I am selling a GT35R. I will post pictures of "GT35RLE" markings as soon as my FTP starts to work.
Nov 17, 2005, 12:44 PM
#10
Evolved Member
Thread Starter
iTrader: (7)
Join Date: Feb 2005
Location: Atlanta, Ga
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
Added 5 pictures on the bottom of the 1st post in this thread to prove this is a GT35R.
Sorry for any confusion anyone has. This is a real GT35R, NOT a 50 trim.
I will continue to accept offers now and reply back to PM's.
Thank you for your time.
Sorry for any confusion anyone has. This is a real GT35R, NOT a 50 trim.
I will continue to accept offers now and reply back to PM's.
Thank you for your time.
Nov 17, 2005, 01:22 PM
#12
Evolved Member
iTrader: (5)
Join Date: Sep 2004
Location: CO/WI
Posts: 823
Likes: 0
Received 0 Likes
on
0 Posts
good to hear its the correct one and you didnt get ripped off initally!
A friend of mine with a eclipse bought a used turbo, installed it 2 years later and during the install at AMS they found out the turbo was blown-too bad for him
Good luck with selling it, and bump for an amazing turbo package
A friend of mine with a eclipse bought a used turbo, installed it 2 years later and during the install at AMS they found out the turbo was blown-too bad for him
Good luck with selling it, and bump for an amazing turbo package
