4G69 Information/Cross References
#1
4G6x Parts That Can Be Used in 4G69...
I had some free time today and decided to do some research. I've come up with the following:
4G69 uses 4G63 rod and crank bearings (old news)
4G69 uses 4G64, 4G94 valve guides and seals
4G69 uses the EVO timing belt tensioner which is aluminum, not cast iron
4G69 intake valve = 34mm (4G63 EVO = 34mm) May fit?
4G69 exhaust valve = 30.55mm (4G63 EVO = 30.5mm) May fit?
4G69 uses 4G64, 4G94 valve spring retainers
4G69 uses 4G63, 4G64 head bolts (can use 4G63 ARP head studs )
4G69 uses 4G63, 4G64 main bolts (can use 4G63 ARP main studs )
4G69 uses 4G63 EVO balance shafts (can use 4G63 EVO BS eliminator kit )
Nothing spectacular, I know. Every little bit helps though. Here's a good read on how Mitsubishi took a 4G64, modified it and called it a 4G69: Article. Lightened rods, lightened crank, lightened crank pulley, larger valves, shorter block height and other goodies. They did a very nice job and came out with a very nice engine.
4G69 uses 4G63 rod and crank bearings (old news)
4G69 uses 4G64, 4G94 valve guides and seals
4G69 uses the EVO timing belt tensioner which is aluminum, not cast iron
4G69 intake valve = 34mm (4G63 EVO = 34mm) May fit?
4G69 exhaust valve = 30.55mm (4G63 EVO = 30.5mm) May fit?
4G69 uses 4G64, 4G94 valve spring retainers
4G69 uses 4G63, 4G64 head bolts (can use 4G63 ARP head studs )
4G69 uses 4G63, 4G64 main bolts (can use 4G63 ARP main studs )
4G69 uses 4G63 EVO balance shafts (can use 4G63 EVO BS eliminator kit )
Nothing spectacular, I know. Every little bit helps though. Here's a good read on how Mitsubishi took a 4G64, modified it and called it a 4G69: Article. Lightened rods, lightened crank, lightened crank pulley, larger valves, shorter block height and other goodies. They did a very nice job and came out with a very nice engine.
Last edited by senate6268; Jun 21, 2005 at 04:36 PM.
#7
Originally Posted by WoRkZ
-
Isn't it the 4G63???
-
Isn't it the 4G63???
-
Last edited by Jay-Eff; Jun 16, 2005 at 11:07 AM.
Trending Topics
#8
The only thing I don't like about the 4G69 is that the block height is 6mm shorter than the 4G64. This brings the block height back to the same as the EVO 4G63. The 4G69 uses the same length rods as the EVO with a longer stroke of 100mm. EVO pistons, even forged ones can be used in the 4G69. However, these pistons need to be 87mm. That's the only downside. The solution is to get stroker pistons for the EVO in 87mm. 87mm pistons for an EVO, however, are not easily sourced. They more than likely would have to be made custom by JE, Wiseco, Arias, etc.
#9
Evolved Member
iTrader: (2)
Join Date: Apr 2004
Location: Sherbrooke, Qc
Posts: 2,297
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Jay-Eff
4g63 is for 90-99 dsm's (1g-2g turbo talon,all laser and 1g n/t talon, 1g and 2g eclipse, 1g galant) and evo's only!
Oups! Merci Jay-Eff!
I never new the engine was different from the EVO... I just thought they swapped some of the internals.
J'va me coucher moins niaiseux...
-
#11
Newbie
iTrader: (1)
Join Date: Jul 2004
Location: Great White North
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LancerOfOZ
the 02-03 lancers have the 4g94. The OZ, ES, and LS.
Oh BTW, thanks alot for all the leg work.
Last edited by 403RA; Jun 27, 2005 at 09:08 PM.