Deatschwerks Injectors NOW AVAILABLE!!!!
#1
Deatschwerks Injectors NOW AVAILABLE!!!!
For all you guys from the Subaru and Nissan world you already know how nice these injectors are. For those that do not know here is a background.
At Deatschwerks we take a unique approach to building our high flow injectors. Other fuel injection companies offer only a couple different styles of injectors and leave fitting them up to the customer. At Deatschwerks every injector we produce is a drop-in fitment for its application. When we say drop-in fitment we mean drop-in fitment. Our injectors are engineered to fit your OEM harness, OEM fuel rail and OEM manifold.
All Deatschwerks high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. For our customers, this means better fitment, easier tuning, and increased reliability. We back all of our products with a comprehensive 12-month warranty.
Most aftermarket injectors go straight from the production line to the shipping department. At Deatschwerks, we have added what we consider a crucial step of flow balancing and quality assurance testing on EVERY set of injectors we produce - not just one or two from each lot. Over 40 data points are collected and analyzed on each injector to be sure our customers only receive the best end product. All of our testing is performed in-house on our custom built New Age Technologies injector flow bench.
Below is a brief outline of some of our testing
* 6-point coil test
* Leak testing from 0-100psi
* RPM Ramp 500-10,000 rpm
* Pulse Width Ramp 0.5-17ms
* Spray pattern analysis (open and pulsed)
Detailed High Performance Flow Report
Every set of Deatschwerks injectors is accompanied by a full color injector report This comprehensive report contains information on your specific injectors that is critical to the high performance tuner such as...
* Fuel pressure flow rate conversions
* cc/min and lbs/hr conversions
* BSFC based horsepower maximims
* System balance and flow variance
We now have these in stock and ready to ship!!!
750cc - 309.00 Shipped
870cc - 329.00 Shipped
At Deatschwerks we take a unique approach to building our high flow injectors. Other fuel injection companies offer only a couple different styles of injectors and leave fitting them up to the customer. At Deatschwerks every injector we produce is a drop-in fitment for its application. When we say drop-in fitment we mean drop-in fitment. Our injectors are engineered to fit your OEM harness, OEM fuel rail and OEM manifold.
All Deatschwerks high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. For our customers, this means better fitment, easier tuning, and increased reliability. We back all of our products with a comprehensive 12-month warranty.
Most aftermarket injectors go straight from the production line to the shipping department. At Deatschwerks, we have added what we consider a crucial step of flow balancing and quality assurance testing on EVERY set of injectors we produce - not just one or two from each lot. Over 40 data points are collected and analyzed on each injector to be sure our customers only receive the best end product. All of our testing is performed in-house on our custom built New Age Technologies injector flow bench.
Below is a brief outline of some of our testing
* 6-point coil test
* Leak testing from 0-100psi
* RPM Ramp 500-10,000 rpm
* Pulse Width Ramp 0.5-17ms
* Spray pattern analysis (open and pulsed)
Detailed High Performance Flow Report
Every set of Deatschwerks injectors is accompanied by a full color injector report This comprehensive report contains information on your specific injectors that is critical to the high performance tuner such as...
* Fuel pressure flow rate conversions
* cc/min and lbs/hr conversions
* BSFC based horsepower maximims
* System balance and flow variance
We now have these in stock and ready to ship!!!
750cc - 309.00 Shipped
870cc - 329.00 Shipped
#2
Bump!!!
Just to show you guys how awesome these are. Your stock OEM injectors are only required to be within 5% of each other most aftermarket injectors are the same. All deatschwerks are matched within 2% of each other.
Also flow charts and such are included and injectors are serial numbered so you can put the highest flowing injector on the cylinder most prone to running lean.
Just to show you guys how awesome these are. Your stock OEM injectors are only required to be within 5% of each other most aftermarket injectors are the same. All deatschwerks are matched within 2% of each other.
Also flow charts and such are included and injectors are serial numbered so you can put the highest flowing injector on the cylinder most prone to running lean.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
DeatschWerks
Vendor Announcements
2
Jun 7, 2012 02:43 PM
JSC Speed
EvoX 'For Sale' External Engine / Power
16
Oct 3, 2010 01:21 PM
DeatschWerks
Evo X Engine / Turbo / Drivetrain
42
Jul 8, 2010 08:21 AM
DrivelineSales
EvoX 'For Sale' External Engine / Power
50
Apr 2, 2010 02:34 PM
maperformance
EvoX 'For Sale' External Engine / Power
80
Aug 21, 2009 08:49 AM