 |
|
Aug 26, 2009, 06:26 PM
|
#1
|
|
Evolved Member
Personal Sales Rating: ( 67)
Join Date: Jan 2004
Location: [
Posts: 1,086
Drives: IX
|
Spoolinup COP for Evo IX installed.....
I purchased this kit from http://www.spoolinup.com/ last week. It arrived sooner than I thought, getting to my mailbox within three days.
Out of the box, it is an extremely solid and well put together kit. The wiring harness is top notch with no complaints on the quality of parts used.
I went ahead and painted the mounting bracket low gloss black (high-temp), wetsanded, and allowed a day to dry before install.
I got it installed yesterday and within three minutes of driving I could definitely tell a difference. After a few days of driving with this COP, I noticed that the engine starts, idles, and just feels smoother overall. I will say that the car goes through the RPM's quicker and smoother than before. There may be some HP gains to be had, as is definitely feels like it.
Overall I am pleased with the purchase so far, and I would highly recommend this coil on plug setup.
__________________
TTP-Engineering
|
|
Offline
|
|
|
Aug 27, 2009, 05:33 AM
|
#2
|
|
Evolved Member
Personal Sales Rating: ( 26)
Join Date: May 2007
Location: Austin, TX
Posts: 1,271
Drives: 05 Silver Evo 8.5, 03 TB Evo 8 Project, 03 Flat Black Evo 8 daily, 07 R1... Also Sievers' 2.3L Evo 8 @ 40+ psi
|
Looks nice. Thanks for the review.
|
|
Offline
|
|
|
Aug 27, 2009, 06:04 AM
|
#3
|
|
Evolved Member
Personal Sales Rating: ( 26)
Join Date: Aug 2005
Location: Where the streets have no name
Posts: 4,057
Drives: 03 TB VIII
|
Thanks man. Very affordable also wow
__________________
4WS TUNED VIII
Quote:
Originally Posted by Evoryder
Its' the turbo punching out for the day
|
|
|
Online
|
|
|
Aug 27, 2009, 02:23 PM
|
#4
|
|
Evolving Member
Personal Sales Rating: ( 12)
Join Date: Aug 2006
Location: Cambridge Ohio
Posts: 446
Drives: 03 Evo VIII
|
Any more info on this COP??
I have a built 2.0, FP Red, AEM ems, 30 psi on pump. Thought about giving this a shot, but would really like a little more info. Any dyno charts or even DLLs?
__________________
"Son let me tell you something, nobody remembers who finished second but the guy who finished second."
- Bobby Unser
Quote:
Originally Posted by GrocMax
"OK, so how much power does it make on pump gas at the 40th meridian when I wear Gucci underwear after an abalone and sun dried plum pizza lunch?"
|
|
|
Offline
|
|
|
Aug 27, 2009, 02:25 PM
|
#5
|
|
Evolving Member
Personal Sales Rating: ( 8)
Join Date: Oct 2008
Location: deltona
Posts: 381
Drives: evo 8
|
looks great brian
im gonna pick one of these up too
is that a stock exhaust mani with the bolt holes grinded off?
|
|
Offline
|
|
|
Aug 27, 2009, 08:03 PM
|
#6
|
|
Evolved Member
Personal Sales Rating: ( 67)
Join Date: Jan 2004
Location: [
Posts: 1,086
Drives: IX
|
No dyno charts. I will be going to the track probably next month to see if I can beat my previous time. I am running the stock turbo with 100% meth at a peak of 33psi.
Thanks! Yes, that is the PPI ported manifold that has been grinded and smoothed, then coated.
__________________
TTP-Engineering
|
|
Offline
|
|
|
Aug 27, 2009, 08:05 PM
|
#7
|
|
Evolved Member
Personal Sales Rating: ( 15)
Join Date: Nov 2005
Location: Raleigh, NC/Myrtle Beach, SC
Posts: 1,517
Drives: 97GSX<GGIXMR
|
Good to see more reviews coming out for this product...I still went ahead and just purchased the Sparktech COP setup though... 
__________________
12.05 @ 116.5mph....93 oct., Stock turbo, Stock motor (Stock cams), Stock Intake Manifold & TB, crappy 6 spd tranny, a bunch of bolt-ons, SPARKTECH nonCDi COP, 25 psi, Tuned by Kasey @ MAP (2009)
For the Fastest/Quickest Stock Appearing Turbo Times of 2009 Click Below
For all your Ignition NEEDS & WANTS, CLICK BELOW!!
|
|
Online
|
|
|
Aug 27, 2009, 08:10 PM
|
#8
|
|
Newbie
Personal Sales Rating: ( 0)
Join Date: Jun 2007
Location: CALIFORNIA
Posts: 51
Drives: 2006 EVOLUTION MR GG
|
love that exhaust manifold,looks clean.
|
|
Offline
|
|
|
Aug 27, 2009, 09:25 PM
|
#9
|
|
Newbie
Personal Sales Rating: ( 0)
Join Date: Sep 2008
Location: Las Vegas, NV
Posts: 6
Drives: 06 Evo IX
|
If you don't mind me asking where did you get your exhaust manifold done?
|
|
Offline
|
|
|
Aug 27, 2009, 09:48 PM
|
#10
|
|
Evolved Member
Personal Sales Rating: ( 49)
Join Date: Nov 2005
Location: Wherever is clever
Posts: 618
|
Is it possible to put a spark plug cover on, with the Spoolinup COP unit?
__________________
Speed Element, Touge Factory, GST Motorsports
400 wtq - Stock Evo 9 turbo
Quote:
Originally Posted by Jeffroevoix
I've been sitting on the couch for the last 4 hours looking at your car
Its dank!
|
|
|
Offline
|
|
|
Aug 27, 2009, 10:08 PM
|
#11
|
|
Evolved Member
Personal Sales Rating: ( 14)
Join Date: Jun 2007
Location: Silt, Colorado
Posts: 862
Drives: 03 EVO8, 05 R6
|
Have you tried running more spark plug gap?
__________________
03 Apex silver EVO VIII 12.25@113 1.83 60' @ 4800 ft
stock 9 turbo, stock ecu, stock block e-85
|
|
Offline
|
|
|
Aug 28, 2009, 05:41 PM
|
#12
|
|
Evolved Member
Personal Sales Rating: ( 67)
Join Date: Jan 2004
Location: [
Posts: 1,086
Drives: IX
|
I am sure you could physically get the spark plug cover to fit, but it is not recommended due to heat retention around the coils. And I prefer letting these pretty coils be seen!
I have not changed the spark plug gap yet, as I wanted to see the difference before doing so. When I have time in a few weeks I will try more gap.
__________________
TTP-Engineering
|
|
Offline
|
|
|
Aug 29, 2009, 09:35 PM
|
#13
|
|
Evolved Member
Personal Sales Rating: ( 23)
Join Date: Apr 2006
Posts: 2,614
Drives: 2006 GG EVOLUTION IX MR
|
Very nice but I would like to see more data.
__________________
EVOLUTION IX MR
Consciousness is not a bi-product of our biology; consciousness expresses itself through our biology.
Quote:
Originally Posted by KOEvo
Brilliant
From what i understand, High_PSI wakes up and pisses excellence every morning.
|
|
|
Offline
|
|
|
Aug 31, 2009, 06:19 PM
|
#14
|
|
Silver Sponsor
Personal Sales Rating: ( 2)
Join Date: Apr 2008
Location: Ashburn, VA
Posts: 131
Drives: 04 SSL
|
Thanks for the positive comments guys. These kits are still not where I completely want to go, but I was getting so much business from EvoM that I found it the right thing to sponsor. My actual target to start sponsorship was about two months from now when I finish the last version of the kit. Oh well! When things happen you need to be ready to handle them.
Quote:
Originally Posted by Positron
Is it possible to put a spark plug cover on, with the Spoolinup COP unit?
|
Not at this time, but he got this on my mega sale on my few last remaining kits (about 5 used and 3 new left, waiting on a shipment of nice connectors from Japan then the people who locked in the price on back order will get their kits). After the last few sell out the kits with new coils will be able to fit under the spark plug cover. Used coil kits will still look about the same. I wish I could find them in the flat style, but that just isn't how things work. You guys rock!
Oh and coming soon I will be giving one away for someone who makes me a good logo since that just isn't my cup of tea. Also looking for a few crazy HP stock cars, but we'll get to that later.
__________________
-Matt
http://www.SpoolinUp.com
Affordable COP Kits - Back in Stock!
"Performance without the Price Tag"
|
|
Offline
|
|
|
Aug 31, 2009, 06:44 PM
|
#15
|
|
Evolving Member
Personal Sales Rating: ( 7)
Join Date: Jan 2006
Location: hunting v8s
Posts: 375
Drives: stock VIII
|
Quote:
Originally Posted by Tallen
Thanks for the positive comments guys. These kits are still not where I completely want to go, but I was getting so much business from EvoM that I found it the right thing to sponsor. My actual target to start sponsorship was about two months from now when I finish the last version of the kit. Oh well! When things happen you need to be ready to handle them.
Not at this time, but he got this on my mega sale on my few last remaining kits (about 5 used and 3 new left, waiting on a shipment of nice connectors from Japan then the people who locked in the price on back order will get their kits). After the last few sell out the kits with new coils will be able to fit under the spark plug cover. Used coil kits will still look about the same. I wish I could find them in the flat style, but that just isn't how things work. You guys rock!
Oh and coming soon I will be giving one away for someone who makes me a good logo since that just isn't my cup of tea. Also looking for a few crazy HP stock cars, but we'll get to that later. |
is the price going up? I'm also looking to get this
__________________
Jestr Tuned
93 + Meth Stock ECU FP Red 565WHP & 523WTQ
Jestrtuning.com Xtremeboost.com
|
|
Offline
|
|
|
|
|
Tags
|
c.o.p., coil on plug, cop, cover, evo, exhaust, manifold, plug, porting, review, service, spark, spoolinup, spoolinupnet, system  |
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
| | 
|
