Hi, there.


I recently got a cdi ignition system from you guys and it does not have any spark and the car won’t start but the car will start on the stock coil pack. I found out the coils won’t seals with the valve cover. I don’t know what is going on. The positive and negative are connected properly so it should work. Please help.

Thanks

Can you please contact me directly regarding the Evo X COP? The car can. W seen at www.instagram.com/extremeevox and I can be reached at shmoobs@aol.com

Thanks
Matt

Hello
I have you cop kit for Evo 8.
I lose the sheet with dwell infos.. Can you send me a pm with dwell infos?
Regards

Can I get a price for your billet coil covers for the evo X (92646) ?

Could send me a price for your coil on plug with cdi setup for a 03 Evo 8 w/ aem and methanol. Also, what is included in your kit and what kind of warranty to do you have.

Thank you,

Justin

Hello, I'm interested in your Spark Tech coil system for a road racing EVO 7, which would you recommend? the non CDI or the CDI unit ? We race the EVO with stock ECU (ecuflash map tuned) EVO9 turbo and Kelford 272/272 cams... thanks!

Hello,
I have a heavily built 2.0lt Evo 9 and I have your Spark Tech Pro CDI 14 System drived by a MOTEC M800 ECU.I use NGK Racing R7438-9.What plug gap should I have?
Boost pressure is 30psi (LOW) - 46psi (High) at 100 octane pump gas.
Turbo is PTE6765 billet.