When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have built my trans recently and have a rattle sound rpm based. It does it with or without the clutch pressed. Shifts fine and everything seems good but at idle it rattles. I have a exedy twin disk clutch with a new center floater plate and both disks. Trans build consists of replaced all three sliders 3rd and 4th syncro gears carbon syncro kit taper bearing upgrade kit and all the shims 1.16 input shaft 1.19 output shaft 1.10 final drive. I was wanting to know if its a normal noise after a rebuild.