HUGE THANKS to UMS for tuning my Turbo Mitsu Mini truck
#1
Newbie
Thread Starter
Join Date: Jun 2009
Location: Phx, AZ.
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
HUGE THANKS to UMS for tuning my Turbo Mitsu Mini truck
Tuned the mini truck today, finally..
First time on the dyno, my brand new 3 week old clutch (stock) blew apart at 9psi. So I had to order a new clutch. I ordered a Centerforce Dual Friction heavy duty clutch, and a brand new OEM flywheel. Put them in, broke them in, and returned today to try our luck at hitting 300whp/300+wtq @ 18-20psi.
Also, before returning, I installed a 2g MAF, with a custom fab'd intake to work in my truck with the new oval-mouthed MAF. The intake was complete custom, and I also had the BOV flange and tubing done all by my boy All-Motor Mike. He's an awesome fabricator, BIG thanks to him as well..
Got on the dyno, pushed the turbo, and due to the clutch (Centerforce) starting to let loose, Tony tuned conservative. The truck made 243.9whp/256.8wtq @ 14.8psi. Not too shabby for a tiny little unexpecting mini truck, huh.. LOL
THANKS Tony & Jeremy.. Awesome, like always.
On to the pics and video..
First time on the dyno, my brand new 3 week old clutch (stock) blew apart at 9psi. So I had to order a new clutch. I ordered a Centerforce Dual Friction heavy duty clutch, and a brand new OEM flywheel. Put them in, broke them in, and returned today to try our luck at hitting 300whp/300+wtq @ 18-20psi.
Also, before returning, I installed a 2g MAF, with a custom fab'd intake to work in my truck with the new oval-mouthed MAF. The intake was complete custom, and I also had the BOV flange and tubing done all by my boy All-Motor Mike. He's an awesome fabricator, BIG thanks to him as well..
Got on the dyno, pushed the turbo, and due to the clutch (Centerforce) starting to let loose, Tony tuned conservative. The truck made 243.9whp/256.8wtq @ 14.8psi. Not too shabby for a tiny little unexpecting mini truck, huh.. LOL
THANKS Tony & Jeremy.. Awesome, like always.
On to the pics and video..
#7
Evolving Member
iTrader: (4)
Join Date: Jan 2007
Location: Phillipsburg, NJ
Posts: 488
Likes: 0
Received 0 Likes
on
0 Posts
Nice, get that clutch issue figured out and get back to the dyno with more boost
AMM does some amazing work I've seen some of his manifolds and they are just awesome looking and performing
AMM does some amazing work I've seen some of his manifolds and they are just awesome looking and performing
Trending Topics
#8
Newbie
Thread Starter
Join Date: Jun 2009
Location: Phx, AZ.
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Believe me, thats the plan. AMM is going to do my new manifolds, FMIC, chargepiping, then another tune.
#10
Newbie
Thread Starter
Join Date: Jun 2009
Location: Phx, AZ.
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
#13
Newbie
Thread Starter
Join Date: Jun 2009
Location: Phx, AZ.
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Sharkbite2000
Evo Show / Shine
356
Jan 23, 2023 12:02 AM
Sharkbite2000
Evo Engine / Turbo / Drivetrain
198
Jan 12, 2010 09:12 AM
SOCALMITSU.COM
Huntington Beach/South Coast/Long Beach/Victorville Mitsubishi - CA
2
Jun 25, 2008 08:35 PM
smeghead009
04-06 Lancer Ralliart Show & Shine
48
Jan 2, 2008 02:50 AM