 |
|
Oct 31, 2008, 07:44 AM
|
#1
|
|
Evolving Member
Personal Sales Rating: ( 0)
Join Date: Sep 2007
Location: Pembroke Pines, FL
Posts: 104
Drives: 2008 WW LANCER GTS
|
CVT Transmission Flush!
Alright, I spoke to Mitsubishi and asked them about the regular maintenances we are supposed to do on our car. They told me after 30k miles your supposed to do a transmission flush. Besides MITSU does anyone know if any other shop does this?
__________________
MODS: Xtreme Boost Turbo!! in few weeks.
RRM/Stop tech Rotors and pads,Eigbach Sportline springs 1.7F-1.2R , TENZO 18X8, Toyo proxes 4 235/40/18, HID 6000K, AUTOPAGE 900 Universal Carbon Fiber exhaust, 2500k Fogs, Clarion 7' in dash, K&N Filter, Clarion woofers.
|
|
Offline
|
|
Oct 31, 2008, 08:26 AM
|
#2
|
|
Evolved Member
Personal Sales Rating: ( 0)
2008 Mitsubishi Lancer
Join Date: Jul 2007
Location: the land between lancer and evo
Posts: 1,689
Drives: Lancer 2008 GTS
|
it might be during severe conditions our manual (which I dont have in front of me right now) but there are two schedules. Normal and Severe, its possible under severe conditions, like harsh weather, heavy towing all the time, that a 30k miles flush should be done. but I think the regular interval is actually 60k miles.
This is something I was going to bring up before... since I have been talking to some of my contacts in japan with boosted 4B11's but your oil changes, tranny, and other heat sensitive parts should change your fluids twice as frequently.
So a 30k mile change would be recommended if you have a turbo. Also consider changing to a better brand. I did a write up early, hmmmmm where is it
__________________
Current MODs:
XenonDepot 3000k (Low) - Injen CAI - Custom 2.25" Dual Exhaust - Side License Mount - HOS Urban Fr and Rr Lip - Tints: 22% 5% - LED Side Mirror - 18" MSR Style 045 - Scorpion V-LIP - 3 Piece Spoiler - ASW 4-2-1 - KVR CF Brake Pads - KVR J Hook Rotors (Silver)
Next:
XenonDepot HID 3000k (fog) - ASW Engine Dampener
"A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools."
|
|
Offline
|
|
Oct 31, 2008, 11:56 AM
|
#3
|
|
Evolving Member
Personal Sales Rating: ( 0)
Join Date: Sep 2007
Location: Pembroke Pines, FL
Posts: 104
Drives: 2008 WW LANCER GTS
|
Cvt
what did your contacts tell you about the 4b11 holding up on the turbo? How much boost and whp are they getting? Are any of them CVT?
__________________
MODS: Xtreme Boost Turbo!! in few weeks.
RRM/Stop tech Rotors and pads,Eigbach Sportline springs 1.7F-1.2R , TENZO 18X8, Toyo proxes 4 235/40/18, HID 6000K, AUTOPAGE 900 Universal Carbon Fiber exhaust, 2500k Fogs, Clarion 7' in dash, K&N Filter, Clarion woofers.
|
|
Offline
|
|
Oct 31, 2008, 09:08 PM
|
#4
|
|
Newbie
Personal Sales Rating: ( 0)
Join Date: Jun 2008
Location: New Jersey
Posts: 48
Drives: 2009 Lancer GTS
|
Hopefully some are CVT so we can get some info (hopefully extremely positive) on what our CVT's can handle. I'm dying to know.
|
|
Offline
|
|
Nov 1, 2008, 09:25 PM
|
#5
|
|
Evolved Member
Personal Sales Rating: ( 0)
2008 Mitsubishi Lancer
Join Date: Jul 2007
Location: the land between lancer and evo
Posts: 1,689
Drives: Lancer 2008 GTS
|
Quote:
Originally Posted by LANCERGTS2008
what did your contacts tell you about the 4b11 holding up on the turbo? How much boost and whp are they getting? Are any of them CVT?
|
280 WHP before failure. Failure occured 3 times, all with continously varriable operation with the accumulation of too much heat.
well they said thats what the Autopsy showed lol
__________________
Current MODs:
XenonDepot 3000k (Low) - Injen CAI - Custom 2.25" Dual Exhaust - Side License Mount - HOS Urban Fr and Rr Lip - Tints: 22% 5% - LED Side Mirror - 18" MSR Style 045 - Scorpion V-LIP - 3 Piece Spoiler - ASW 4-2-1 - KVR CF Brake Pads - KVR J Hook Rotors (Silver)
Next:
XenonDepot HID 3000k (fog) - ASW Engine Dampener
"A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools."
|
|
Offline
|
|
Nov 2, 2008, 10:20 PM
|
#6
|
|
Account Disabled
Personal Sales Rating: ( 0)
Join Date: Feb 2008
Location: Houston
Posts: 1,426
Drives: 08 Evo X GSR,08 Lancer GTS, 07 Civic Si
|
Quote:
Originally Posted by evo_soul
280 WHP before failure. Failure occured 3 times, all with continously varriable operation with the accumulation of too much heat.
well they said thats what the Autopsy showed lol
|
280 on a CVT is still impressive. i doubt many here who planned to go turbo with a CVT at one point or another didnt want to go too much past 210whp
|
|
Offline
|
|
Nov 4, 2008, 11:36 AM
|
#7
|
|
Newbie
Personal Sales Rating: ( 0)
Join Date: Oct 2008
Location: East Coast
Posts: 79
Drives: '08 Lancer CVT ES-GT
|
CVT Transmission Flush @ 30k
Quote:
Originally Posted by LANCERGTS2008
Alright, I spoke to Mitsubishi and asked them about the regular maintenances we are supposed to do on our car. They told me after 30k miles your supposed to do a transmission flush. Besides MITSU does anyone know if any other shop does this?
|
Not very many '08+ CVT Lancers have 30k. I travel the country for work and my '08 Lancer is a little over a year old and I have 40k. My dealer told me that it was req'd to flush the CVT @ 30k and tried to tell me that a costly adjustment to the valve timing is also req'd. After doing some research with other dealers, I found that the valve timing adjustment is not req'd unless you are getting a clicking noise from the engine compartment. Owners beware, my 30k maintenance cost roughly $450 with a synthetic oil change. The dealer qouted over $300 for the un-needed valve timing adjustment. If you are not gettting clicking noises from the engine, you DO NOT NEED a timing adjustment.
__________________
JoeyBallGame
'08 CVT Lancer ES-GT Silver Metallic
[x]5-15% Performance Tint
[x]RRM Pulley
[x]RRM SRI
[x]MagnaFlow Axle Back Exhaust
[x]1st Brake Upgrade
[x]RRM Chassis Braceing Kit
[x]RRM Rear Sway Bar
[ ]17" Lite Wt. Wheel & Tire Combo (Spring '10)
[ ]Pruven Performance Custom Engine Tuning
[ ]RRM Motor Mounts
[ ]RRM Coil Over Adjustable Suspension
[ ]RRM CVT Turbo w/ Trans Cooler
[ ]RRM CarbonFiber Covers & Hood
[ ]EVO Body Kit & New Paint Job...
|
|
Offline
|
|
Nov 4, 2008, 11:48 AM
|
#8
|
|
Evolved Member
Personal Sales Rating: ( 0)
Join Date: Jun 2007
Location: Vancouver BC
Posts: 543
Drives: 2008 Lancer GTS 5 spd w/ sun&sound
|
you are supposed to change it every 30K miles based on the severe service schedule. And they don 't flush it, they just change it, you can do this yourself if you can do an oil change. The TCM does monitor the deterioration of your CVT fluid so you will have to take it to mitsu for them to reset it.
|
|
Offline
|
|
Nov 5, 2008, 06:08 AM
|
#9
|
|
Evolved Member
Personal Sales Rating: ( 0)
Join Date: Jul 2007
Location: ¯\(º_o)/¯
Posts: 724
Drives: Skyline/Evo/Genesis...?
|
Quote:
Originally Posted by evo_soul
280 WHP before failure. Failure occured 3 times, all with continously varriable operation with the accumulation of too much heat.
well they said thats what the Autopsy showed lol
|
280 WHP!?!?!  <How come you didn't tell me this before soul!?!?! Holding out on the info?
|
|
Offline
|
|
Nov 6, 2008, 03:29 PM
|
#10
|
|
Evolved Member
Personal Sales Rating: ( 0)
2008 Mitsubishi Lancer
Join Date: Jul 2007
Location: the land between lancer and evo
Posts: 1,689
Drives: Lancer 2008 GTS
|
Quote:
Originally Posted by Hydrolikz
280 WHP!?!?!  <How come you didn't tell me this before soul!?!?! Holding out on the info? 
|
dude lol, 280WHP to the wheels is more than even a Stock EVO. actually its inline with an evo with a ECU flash and a soft bolt on.
that is alot of power. and it only failed when they continuously hammered it. I only found out recently. They didnt tell me before how many they killed and what the breaking point was.
Actually I am just eager to see the pics
__________________
Current MODs:
XenonDepot 3000k (Low) - Injen CAI - Custom 2.25" Dual Exhaust - Side License Mount - HOS Urban Fr and Rr Lip - Tints: 22% 5% - LED Side Mirror - 18" MSR Style 045 - Scorpion V-LIP - 3 Piece Spoiler - ASW 4-2-1 - KVR CF Brake Pads - KVR J Hook Rotors (Silver)
Next:
XenonDepot HID 3000k (fog) - ASW Engine Dampener
"A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools."
|
|
Offline
|
|
Nov 6, 2008, 09:52 PM
|
#11
|
|
Newbie
Personal Sales Rating: ( 0)
Join Date: Jun 2008
Location: New Jersey
Posts: 48
Drives: 2009 Lancer GTS
|
where did they get the turbos from?!
|
|
Offline
|
|
Nov 7, 2008, 01:25 PM
|
#12
|
|
Evolved Member
Personal Sales Rating: ( 0)
2008 Mitsubishi Lancer
Join Date: Jul 2007
Location: the land between lancer and evo
Posts: 1,689
Drives: Lancer 2008 GTS
|
unknown, the size or kiloton yield of the turbo.
__________________
Current MODs:
XenonDepot 3000k (Low) - Injen CAI - Custom 2.25" Dual Exhaust - Side License Mount - HOS Urban Fr and Rr Lip - Tints: 22% 5% - LED Side Mirror - 18" MSR Style 045 - Scorpion V-LIP - 3 Piece Spoiler - ASW 4-2-1 - KVR CF Brake Pads - KVR J Hook Rotors (Silver)
Next:
XenonDepot HID 3000k (fog) - ASW Engine Dampener
"A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools."
|
|
Offline
|
|
Nov 7, 2008, 03:29 PM
|
#13
|
|
Account Disabled
Personal Sales Rating: ( 0)
Join Date: Feb 2008
Location: Houston
Posts: 1,426
Drives: 08 Evo X GSR,08 Lancer GTS, 07 Civic Si
|
Quote:
Originally Posted by evo_soul
dude lol, 280WHP to the wheels is more than even a Stock EVO. actually its inline with an evo with a ECU flash and a soft bolt on.
that is alot of power. and it only failed when they continuously hammered it. I only found out recently. They didnt tell me before how many they killed and what the breaking point was.
Actually I am just eager to see the pics
|
so over there with boosted CVTs do they every actually use D mode? i couldnt help but expect it to be hard on the tranny if they floor it and it holding the RPM strong at 6k+, using manual mode seems like it would be safer. or can it handle both?
|
|
Offline
|
|
Nov 7, 2008, 04:00 PM
|
#14
|
|
Evolved Member
Personal Sales Rating: ( 0)
2008 Mitsubishi Lancer
Join Date: Jul 2007
Location: the land between lancer and evo
Posts: 1,689
Drives: Lancer 2008 GTS
|
actually from my understanding the tranny can handle it, but the thermal buildup is what kills it. Mechanically speaking, a CVT is very durable and Can handle extra load.
I will post a document which might be helpful to everyone in understanding more about how the CVT operates
__________________
Current MODs:
XenonDepot 3000k (Low) - Injen CAI - Custom 2.25" Dual Exhaust - Side License Mount - HOS Urban Fr and Rr Lip - Tints: 22% 5% - LED Side Mirror - 18" MSR Style 045 - Scorpion V-LIP - 3 Piece Spoiler - ASW 4-2-1 - KVR CF Brake Pads - KVR J Hook Rotors (Silver)
Next:
XenonDepot HID 3000k (fog) - ASW Engine Dampener
"A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools."
|
|
Offline
|
|
Nov 8, 2008, 08:09 PM
|
#15
|
|
Newbie
Personal Sales Rating: ( 0)
Join Date: Oct 2007
Location: NH
Posts: 71
Drives: 08 Lancer GTS CVT
|
They should get a RRM CVT tranny cooler
__________________
08 Electric Blue Pearl GTS CVT
Sun & Sound
Nav & Tech
Mods
[X]K&N drop in filter
|
|
Offline
|
|
 |
|
|
Tags
|
09, 2008, clicking, cvt, evolutionm, fluid, flush, lancer, load, noise, oil, quarts, stock, suppose, tranny, transmission  |
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
| |
|