How to: Install Evolution X MR spoiler

XxLaNcErGTSxX · Jun 9, 2008, 05:12 PM

Hello and welcome to another one of my how to's. Today I will be installing my Evolution X MR spoiler.

Tools Required:
10mm socket wrench
Razor blade
Silicon
Drill + Drill bit

1st you will have to remove the GTS spoiler with the 10mm socket wrench.

2ed You will have to lift up as hard as you can, and cut the double-sided tape with a razor blade

3ed. You will now notice that your car has no spoiler.

4th You will also notice that once you have the spoiler off that there is still glue from the foam gasket left on the hood. Take the razor blade and scrape it off.

5th. Now you will notice a 3ed hole in the trunk. This is where a white tab from the GTS spoiler. You do not need this so fill it in with silicone.

6th. Now you will have to make your own gaskets. I was trying to order them but I never recieved them so I went to AA and bought something that was somewhat thin and waterproof.

7th. You will now have to place the gasket on the spoiler. I used silicon to place it on the spoiler.

8th. Now you are ready to drill. You will see a spot to drill your hole on the bottom of the trunk (when it is open.) It is a little punch hole. Drill

9th Now you are ready to install the spoiler. Place the spoiler in the pre drilled GTS holes and bolt them into place. Next Bolt the other hole. I did not use the 3ed hole in the spoiler. Just did not seem necessary.

10th. Use your silicon to cover the bolts so they do not leak. Also silicon the hole from the GTS spoiler that is not used

Congrats you have now installed your new spoiler.

I really hope this helps you guys, if you decide to go for this spoiler

whitelancerGTS · Jun 9, 2008, 07:32 PM

wow that wing looks amazing. where did u get it yo

XxLaNcErGTSxX · Jun 9, 2008, 07:45 PM

Quote:

Originally Posted by whitelancerGTS

wow that wing looks amazing. where did u get it yo

Accolade Body Kits

shunderwunder · Jun 9, 2008, 07:51 PM

need more pics of it installed from a distance.

hadeswolf · Jul 1, 2008, 09:32 PM

wow nice. whered you get that vortex generator or whatever it was called for the earlier evos?

Danny Relic · Jul 2, 2008, 01:12 AM

You can get Vortex Generators here: http://www.manufacturersdepot.com/SPD/vortekz-universal-vortex-generators-black-10-pack-vortekz-vortex-generators-are-universal-to-fit-virtually-all-cars--trucks--vans--suv's--rv's-etc-----800000A6-1180622063.jsp

eyekyu · Jul 6, 2008, 05:43 PM

nice, is it hard gettin all that glue off? u try a heat gun like you would debadge?

XxLaNcErGTSxX · Jul 6, 2008, 06:26 PM

Quote:

Originally Posted by eyekyu

nice, is it hard gettin all that glue off? u try a heat gun like you would debadge?

I did not get the glue off. I just put the new spoiler right over it

CMcraz23 · Jul 9, 2008, 10:19 PM

how much was it because the OEM is like 1500

mb978n · Jul 16, 2008, 11:32 PM

http://cgi.ebay.com/ebaymotors/2008-...spagenameZWDVW this one looks pretty similar and you can get it carbon wrapped too