2008 Lancer bulb list
#1
Evolved Member
Thread Starter
iTrader: (6)
Join Date: May 2007
Location: Myrtle Beach, SC ; Statesville, NC
Posts: 681
Likes: 0
Received 1 Like
on
1 Post
2008 Lancer bulb list
Front of car:
Front turn signal light: 21watts bulb: WY21W
Head light, high beam: 60watts bulb: 9005 HB3
Head light, low beam: (halogen bulb) 51watts bulb: 9006 HB4
front foglight: 55watts bulb: H11
Front side marker and parking light: 5watts bulb: 168/194
Side turn signal light: 5watts bulb: 168/194
REAR of car:
High mounted stop light: Led
License plate: 5watts bulb: 168/194
back up light: 21watts bulb: 7440
tail light: 5watts bulb: W5W
tail and stop light: 21/5watts bulb 7443
rear turn signal: 21watts bulb: 7440
rear sidemarker: 5watts bulb: W5W
INSIDE CAR
trunk area: 5watts bulb:----- 3022
dome light: 8watts bulb:----- 3022
Front turn signal light: 21watts bulb: WY21W
Head light, high beam: 60watts bulb: 9005 HB3
Head light, low beam: (halogen bulb) 51watts bulb: 9006 HB4
front foglight: 55watts bulb: H11
Front side marker and parking light: 5watts bulb: 168/194
Side turn signal light: 5watts bulb: 168/194
REAR of car:
High mounted stop light: Led
License plate: 5watts bulb: 168/194
back up light: 21watts bulb: 7440
tail light: 5watts bulb: W5W
tail and stop light: 21/5watts bulb 7443
rear turn signal: 21watts bulb: 7440
rear sidemarker: 5watts bulb: W5W
INSIDE CAR
trunk area: 5watts bulb:----- 3022
dome light: 8watts bulb:----- 3022
Last edited by Blacksheepdj; Oct 24, 2007 at 10:35 AM. Reason: Update
#3
Side Turn Signals
Has anyone considered sticking the side turn signal assembly (the signal closest to the doors) in the oven and baking it like you would with the headlight assembly? Only thing is that you would be baking it with a bulb inside but I don't think that would make a difference.
Also, has anyone replaced the dome and trunk bulbs with LEDs or any other differently colored bulb? If so, what are the specifications (socket type, etc) besides wattage, which is listed already.
Thanks in advance.
Also, has anyone replaced the dome and trunk bulbs with LEDs or any other differently colored bulb? If so, what are the specifications (socket type, etc) besides wattage, which is listed already.
Thanks in advance.
#5
Evolved Member
Join Date: Sep 2007
Location: Edmonton, Canada
Posts: 721
Likes: 0
Received 0 Likes
on
0 Posts
For anyone who's replaced their lowbeam headlight bulbs, perhaps you can help me out here? I cant for the life of me figure how to reach the back of the bulb assembly to actually unscrew and remove it. I'm probably missing something very obvious here but cant hurt to ask.
#6
Evolving Member
Join Date: May 2007
Location: NE Pennsylvania
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Open your manual, and it shows you how to remove the large plastic cover and the intake tube that is hiding where you need to get to.....It is just a serious of clips, just be careful.
#7
Evolved Member
Join Date: Sep 2007
Location: Edmonton, Canada
Posts: 721
Likes: 0
Received 0 Likes
on
0 Posts
Unfortunately I havent found this section covering removing the cover & intake or maybe I just missed it. All I found was the section showing just how to unscrew the bulb and thats it.
I'll check again though, thanks for the info bro
I'll check again though, thanks for the info bro
Trending Topics
#10
#11
Well, since it is sealed so the bulb can be protected from the weather, baking it would soften the sealant and you would be able to take the cover apart to access the bulb. Many have done it to their headlight assembly in other cars to install angel eyes and such.
Again, I am talking about the side turn signal, not the front side marker inside the headlight.
Again, I am talking about the side turn signal, not the front side marker inside the headlight.