arnold16890

iTrader: (3)

I followed the 02-03 headlight blackingout how-to on blacking my 04 ES headlights.

Materials needed:
10mm wrench, phillips (+) screw driver, 2 flat head screw drivers, a sharp knife or scissors that you won't be using again, 2 towels, primer spray paint, spray paint (color of your hcoice, most do gloss black or metalic black) and silicone sealant.

1) unscrew the 3 bolts holding the headlights in place

arnold16890

iTrader: (3)

2) there is also a clip holding the headlights in place, located roughy behind the long orange side marker. just pull ur headlights a lil harder.

arnold16890

iTrader: (3)

3) preheat ur oven to 275F, have a cookie sheet and a wet towel ready.

arnold16890

iTrader: (3)

4) place headilghts 1 at a time on the wet towel on the cookie sheet. This prevents the bottom plastic of ur headlights from being burned and stuck on to the sookie sheet.

arnold16890

iTrader: (3)

5) "Bake" ur headlights for around 5 minutes. Then take to a place where u will be comfortable sitting in for around an hour.

arnold16890

iTrader: (3)

6) use a flat head screw driver to start prying the black plastic clips.

arnold16890

iTrader: (3)

7) Pull the lense from the black plastic part carefully, cut the silicone sealant with a knife or scissors.

arnold16890

iTrader: (3)

8) almost there~~

arnold16890

iTrader: (3)

9) Voila! now unscrew the 2 screws holding the chrome piece on to the lense

arnold16890

iTrader: (3)

10) take to a dust-free place (i messed up on this part...forgot to close my garage door so there was hella dust)
-Start spraying primer

EVOKing8

iTrader: (6)

nice write up man!

arnold16890

iTrader: (3)

11) apply 3 even coats of primer, wait 15minutes between each application
lol i moved my no-bumper car outside, also kicked my cousin's car out of the garage so i could spray paint~ dont worry, u dont have to take off ur bumper to take out the lights.

arnold16890

iTrader: (3)

12) apply 3 coats of color paint. wait 15 mins between each spray
note: i also painted over the long orange pieces because if u take them out u're left with 2 holes.

arnold16890

iTrader: (3)

13) Done with the spraying~ looks hella good already!

arnold16890

iTrader: (3)

14) DONE! i recommand letting the paint dry over a night ebfore u put everything back together