Sea Foam - Page 3

PhonyEvo_1 · Apr 13, 2006, 04:24 PM

Hey, has anyone else heard of this product call ETHOS. From what it sounds like, its pretty similar to Sea Foam but requires less work to get similar results. It is supposed to launch soon, this month sometime I think.

I had accidentally came across it, and visited a link with a bunch of news clips on the product and then went to the companies website. It seems pretty legit, but I sent them an email with some questions anyways. Pretty nutty though, it's suppose to cut down on emissions, increase gas mileage by 10% or more, and Lubricate all your internals back to stock. Just by pouring one ounce for every 10 gallons of gas and a another ounce in your oil.

Here is a link to the videos I saw: http://www.smallbusinessmedia.com/

Here is a link to their webpage: http://www.ethosfr.com/ (the videos' can also be found on this site, of course)

Just thought I'd put that out there, I'm bored at work.

PhonyEvo_1 · Apr 13, 2006, 04:25 PM

Sorry to go off subject, I just thought that what I said above fit in with this discussion

newbiewonkenobe · Apr 13, 2006, 05:59 PM

^ that's not how their website prescribes. . .

arpad · Apr 14, 2006, 09:15 AM

Quote:

Originally Posted by blaze_125

arpad > Dunno if that helps but here is what's on Seafoam's website:
http://www.seafoamsales.com/pdf/MSDS_SFTT_US.pdf

Thanks! I didn't think that the ingredients would be so simple... Makes me want to brew my own seafoam.

BTW somebody did a little comparison of solvents that I ran across: http://theoildrop.server101.com/cgi/...=5;t=000065;p=

Unfortunately he didn't list the solvent efficiency of the stuff I have (B-12 Chemtool) but it has some of the good ingredients that he found and doesn't dissolve the nylon in the fuel filter.

Time to check the ingredients of Duralube!

Kid Lancer 7 · Apr 14, 2006, 03:32 PM

i just ran this!!.... Holy crap!!

what a difference. you instantly feel the results!... i poured 1/3 down the the gas tank.. 1/3 under the oil cap... and for the vaccum line.. i didnt have an extra person w/ me... so while the car was off i poured the sea foam in the hose when the car was off.. plugged the hose back up.... turned the car on it felt like it was gonna stall but it started up and a ISHH Load of grey smoke came out!!... i repeated this step another 2 times... gave it some high rpms for 2 minutes while in park... then i took it for a drive.. ( i also re-oiled my k&N filter before this.. so it helped the feeling alot!) all i can say is i was very impressed. i think im gonna run another bottle before this weekend.

and no you dont need to leave this stuff in your car for 8 hours. 30-45 mins is enough

Kid Lancer 7 · Apr 14, 2006, 03:47 PM

For the people that are unsure .... this is where you pour the seafoam down the vaccum hose.

jchangsta2six · Apr 14, 2006, 03:49 PM

kid lancer... r u gonna change your oil too now? and which line did you use?

edit: nm ... thanks kid lancer ...

Kid Lancer 7 · Apr 14, 2006, 03:52 PM

Quote:

Originally Posted by jchangsta2six

kid lancer... r u gonna change your oil too now? and which line did you use?

edit: nm ... thanks kid lancer ...

1 more can 2morrow... then oil change and new plugs! man this stuff is the truth!

Bigjoeski05 · Apr 14, 2006, 04:15 PM

I just order my Sea Foam, i can not wait until it gets here.

Kid Lancer 7 · Apr 14, 2006, 04:53 PM

Quote:

Originally Posted by Bigjoeski05

I just order my Sea Foam, i can not wait until it gets here.

you coulda got it from auto zone. thass where i got mine from.. THIS MORNING! if 1 autozone says they dont have it.. another one will.. maybe u should seach in your area and get a can b4 the 2nd one arrives.. running it 2wice wont hurt at all!

Bigjoeski05 · Apr 15, 2006, 10:29 AM

Yeah i knew autozone had it. But i'm planning on changeing my oil next weekend so there is no rush. Also i'm not trying to drive my car around alot until i get my progress springs fixed the dumb ass shop that did them put them on backwards like the purge cups with the holes don't line up and my car pulls harcore to the left. But thats another thread.

Thriver · Apr 15, 2006, 11:18 AM

now when u guys say smoke i pray u guys mean the exhaust and not out of the engine.

Bigjoeski05 · Apr 15, 2006, 12:32 PM

Here is a video of the Sea Foam smoke everyone is talking about.

http://videos.streetfire.net/search/...3DB1B41C75.htm

Kid Lancer 7 · Apr 15, 2006, 08:17 PM

Quote:

Originally Posted by Bigjoeski05

Here is a video of the Sea Foam smoke everyone is talking about.

http://videos.streetfire.net/search/...3DB1B41C75.htm

funny how u posted this. we made a video of all of this too lol. waiting for my friend to post the vid!

Bigjoeski05 · Apr 15, 2006, 09:45 PM

Next weekend i'm going to post a video of myself doing the sea foam process on the 03 lancer.