03 lancer oz new to tuning

[jlm613]

i have a 03 lancer oz and am wanting to build the engine or possibly do an engine swap. i don't know much about cars. i was wondering if you guys could hlep me out with some advice and how to's and ****.

i was also in an accident so i'm looking for a new right fender and passenger door.

[blaze_125]

Originally Posted by jlm613

i don't know much about cars. i was wondering if you guys could hlep me out with some advice and how to's and ****.

Read.
There is a million thread in here that will get you started. Read the forced induction section, NA section, have a look at the Evo forums. Also read Honda-Tech.com. H-T guys have alot of info and knowledge to offer. Knowledge is power. Knowledge will keep you from blowing your motor. If you ain't sure... ask before you do anything.

That'll get you started.
To answer your next 5 "newbie" questions.

Get a short ram intake. Don't bother with the cold air intake.
Which one to get? Save yourself 300$. Just buy a K&N cone filter, an adapter plate and hook that up to your maf.

Don't go bigger than 2.5" exhaust. Unless you're boosting.
Which company to get it from? Your local muffler shop.

How many hp after exhaust and intake?
euh... you'll get a decent sound and maybe 3% increase in power

[nmayes]

Originally Posted by blaze_125

Read.
There is a million thread in here that will get you started. Read the forced induction section, NA section, have a look at the Evo forums. Also read Honda-Tech.com. H-T guys have alot of info and knowledge to offer. Knowledge is power. Knowledge will keep you from blowing your motor. If you ain't sure... ask before you do anything.

That'll get you started.
To answer your next 5 "newbie" questions.

Get a short ram intake. Don't bother with the cold air intake.
Which one to get? Save yourself 300$. Just buy a K&N cone filter, an adapter plate and hook that up to your maf.

Don't go bigger than 2.5" exhaust. Unless you're boosting.
Which company to get it from? Your local muffler shop.

How many hp after exhaust and intake?
euh... you'll get a decent sound and maybe 3% increase in power

Nicely done...I was searching the forum for an intake for the car.

http://www2.partstrain.com/store/?N=...747+11920+6894

Which one?

[Evodreamer28]

This one....http://stores.speedcorps.com/-strse-...Ram/Detail.bok

much cheaper and will give the same performance as injen and aem in my opinion.