*02Lancer*

iTrader: (3)

This is my 16g6 turbo build thread. As of right now the car is on 6psi with maxed out injectors and its making 201whp and 187 TQ. The plans as to what is to come are below if anyone has any idea's or thoughts let me know thanks Rupp.
Have:
1: 4an fitting from line to turbo (ebay) (11)
2: turbo manifold (275) (Chele)
3: Manifold to turbo gasket (also came with manifold
4: Evo 8 turbo with 10.5 hotside (250) (white KnightOZ)
5: O2 dump (came with turbo) (white KnightOZ)
6: Megan racing 3" downpipe (60) (white KnightOZ)
7: Forge wastegate with 5-10 psi spring (came with turbo) (white KnightOZ)
8: Evo 8 j-pipe (came with turbo) (white KnightOZ)
9: Evo 9 intercooler piping and intercooler (100)
10: Greddy RS BOV with 1 spring removed (75) (craigslist)
11: All hose clamps (water, oil return, Intercooler) (10) (autozone)
12: 3' section of water line for turbo (2) (advanced)
13: tappet oil pan (4)
14: Vacuum line and T (6) (autozone)
15: Aeromotive 1:1 FPR (installed) (250) < includes all fittings (jegs)
16: 275cc Injectors < i know i will need bigger when i up boost (100)
17: Tactrix Cables (200) (openecu)
18: Autometer Boost, oil pressure, water temp gauges (installed) (180) (jegs)
19: Act clutch and pressure plate (installed) (420) (nolimitmotorsports)
20: Radiator fluid (10) (autozone)
21: Fidanza flywheel (418) (nolimitmotorsports)
22: 1' of 5/8 hose for oil drain (1) (advanced)
23: o2 bung (7) (advanced)
24: 4' Section of turbo water line (3) (orileys)
25: Oil catch can (ebay) (20)
26: grounding kit (ebay) (20)
27: hex bolt hold to 4an adapter (free) (friend)
28: 4' 4an oil feed line (free) (friend)
29: Honda Mini Radiator with 10'' Pusher Fan (100)
30: #4 AN Male 90 Degree Swivel Run Coupler Fitting -4AN (20)(jegs)
31: 501 Maf (40) (Local yard)\
32: turbo to MAF tube(6) (lowes)
33: Intake tube (free) (made)
34: Turbo to o2 Gasket (12) (dealer)
35: Wideband (150) (Friend)
36: evoscan (25)
Total so far on build:2625$

Extra parts installed.
1: Electric cutout 3" (200) (jegs)
2: .85Lb crank pully (40) Ebay


Upgrades
Step 1
1: injectors
2: Evo 8 ecu
3: 2 step
4: Maf Delete

Step 2
1: Injen piping kit
2: Upgraded fuel rail

Step 3
1: ARP head bolts
2: New top end kit
3: Custom intake manifold
4: Install P&P head

Step 4
1: Torgue bar
2: Strut tower bar

Step 5
1: Evo Throttle body
2: MBC
3: Turbo Timer

Misc
Larger intercooler
Mini battery
h brace
adjustable cam gear
tein coils
Lightweight rims with slicks
ngk plug wires and new coils
New LCA bushings

*custom manifold
5'' d shape
d shape end
boomba 75mm flange
round tubing



While gathering parts for 4g63 conversion.

Evo strurs (Ordered) 400 Came with hubs, knuckles, and LCA's
Evo Hubs (Ordered) Came with Struts
Evo Knuckles (Ordered) Came with Struts
Evo Lower Control arms (Ordered) Came with Struts
Evo brake rotors
Evo Brake Calipers
Evo Pads
Evo Eneregy Suspension LCA Bushings
Evo LH Axle
Evo Rh Axle
Evo Engine harness
Evo viii Engine
Evo 5 Spd
Evo Transfercase



And now for some Pictures

What i have as of now 10/08/09


Turbo and manifold test fit on blown engine


Mani

JRR

iTrader: (19)

i think you need a wideband as well. didnt see one in the list but hay ive had afew as well

and if you need an intake tube to go from the turbo maf sensor, check my sig i got a stock evo 8 one for sale

link62

iTrader: (21)

he does have it on there its #14 on the need list

White_KnightOZ

iTrader: (18)

Its good to see my turbo has found a good home!

Can't wait to see it finished! Keep the dream alive!

JRR

iTrader: (19)

like i said i had a few last nite. good luck with the build. you only know where to go to get help if you need it

josh

JRR

iTrader: (19)

o and i have the tube from bov to ic pipe as well

josh

*02Lancer*

iTrader: (3)

Sweet i might get that evo intake tube there is a cheap ebay one for 50$ idk what one i will go for. And when i was working at the JEGS Engine Master's Challenge today i was talking to my teacher's and some builder's about boosting my vette. So as soon is this is boosted..... Also thank you White knight for most of the parts :P hope you get things worked out and you boost your car soon. Also JRR what number's are you putting down and how long you been boosted.

JRR

iTrader: (19)

according to my ipod touch "pocketdyno" (free app by the way) it said im doin 263whp and right now im runnin 11lbs of boost. i boosted my car last labor day so over a yearnow. 7lbs until 2months ago when i got the boost controller.

ill sell the intake tube and bov tube combo deal if u want and need it. i have no use for them now.


josh

JRR

iTrader: (19)

if yur still lookin for the intake hose and bov recirc hose ill do 35 shipped. lmk. josh

zulu989

iTrader: (8)

gonna have to get the turbo to manifold gasket, metal one, ones that come with the mani will burn up. going to want a catch can otherwise ull have oil all over.

*02Lancer*

iTrader: (3)

Thank you i will change that on the list right now. How about the manifold to turbo will i also need to get a new one of those?

zulu989

iTrader: (8)

i think u messed up, mani to turbo is the one i said to get, the mani to head is also metal and yea u should get that. napa has it ( exhaust mani gasket )

*02Lancer*

iTrader: (3)

O, oops my bad. Does anyone know if most dealer's carry the turbo to manifold gasket, and the turbo to o2 dump gasket in stock because the local dealerships are slow and take in excess if a month to get parts in.

link62

iTrader: (21)

idk think they do its all special order for me it usually took a week then again to get parts

*02Lancer*

iTrader: (3)

ah ok will have to order those is soon then :P thanks