 |
|
Jul 19, 2009, 05:00 PM
|
#1
|
|
Evolving Member
Personal Sales Rating: ( 0)
Join Date: Oct 2003
Location: Intercourse PA
Posts: 116
Drives: 2003 mitsubishi lancer
|
03 Turbo lancer OZ
need help... well i up my boost form 6 to 9psi still running a tadd rich so i'm not worried about blown engine... but my car recently started idling really rough. At initial start the car starts up then sputters and dies... after starting a few times the car stays on however it idles at 500Rpm and feels like it's going to die... what will cause this?
Bad MAF?
Plugs?
Bad O2 sensor?
not a boost leak i checked with boost leak tester..
Done my research... tried google... i'm pretty much all out of ideas...
__________________
J Moua
|
|
Offline
|
|
Jul 19, 2009, 05:18 PM
|
#2
|
|
Evolved Member
Personal Sales Rating: ( 25)
Join Date: Jun 2006
Location: San Diego
Posts: 515
Drives: 02 OZ-T :)
|
i had the same issues recently and my problem was that my timing was off by a tooth...look and see if your timing marks are on point...my 2cents
|
|
Offline
|
|
Jul 19, 2009, 08:55 PM
|
#3
|
|
Evolving Member
Personal Sales Rating: ( 0)
Join Date: Oct 2003
Location: Intercourse PA
Posts: 116
Drives: 2003 mitsubishi lancer
|
Really!!
Really Timing will make it sputter like that? hmmm... interesting.... i will have to look... good thing i have fidanza adjustable cam... the only weird thing is that when i drive the car it's completely fine... just when i start it it sputters... and or idles low/Rough... The car also needs a good tune up... hasn 't been into the dealership since i bought it in 03...
__________________
J Moua
|
|
Offline
|
|
Jul 20, 2009, 09:54 PM
|
#4
|
|
Evolved Member
Personal Sales Rating: ( 25)
Join Date: Jun 2006
Location: San Diego
Posts: 515
Drives: 02 OZ-T :)
|
yea, mine would drive fine too and start up fine, but then as it sat and idle'd, the rpm's got lower and more rough, sometimes cut off....it cut off on me like 5 times while i was trying to back into my garage
|
|
Offline
|
|
Jul 21, 2009, 09:19 AM
|
#5
|
|
Newbie
Personal Sales Rating: ( 0)
Join Date: Feb 2009
Location: Vermont
Posts: 92
Drives: 2002 Turbo Lancer 19lbs of Boost
|
Yah i would check your timing that would make a difference and also what is your cold start set at
|
|
Offline
|
|
Jul 21, 2009, 08:57 PM
|
#6
|
|
Evolving Member
Personal Sales Rating: ( 0)
Join Date: Oct 2003
Location: Intercourse PA
Posts: 116
Drives: 2003 mitsubishi lancer
|
well the car was running fine and all of the sudden it just started doing what its doing now... how do i check my cold start? would the dealership work on my car for the fact that it is modified?
__________________
J Moua
|
|
Offline
|
|
Jul 21, 2009, 09:08 PM
|
#7
|
|
Evolved Member
Personal Sales Rating: ( 13)
2002 Mitsubishi Lancer
Join Date: Aug 2005
Location: Aiken SC
Posts: 785
Drives: A b00st3d 2002 Lancer OZ
|
Oh yeah! They'll be happy to take your money!
Warranty work may be another story...
|
|
Offline
|
|
Jul 21, 2009, 09:53 PM
|
#8
|
|
Evolving Member
Personal Sales Rating: ( 0)
Join Date: Oct 2003
Location: Intercourse PA
Posts: 116
Drives: 2003 mitsubishi lancer
|
haha that goes to show how bad I want to find the problem... grrrrrrrrrrrrrrrrrrrrrrrrrrrrr all great for two years and now it's blah....
__________________
J Moua
|
|
Offline
|
|
Jul 25, 2009, 12:01 AM
|
#9
|
|
Evolving Member
Personal Sales Rating: ( 13)
Join Date: May 2009
Location: Cape Coral, Florida
Posts: 128
Drives: Evil 8
|
I'd say do a tune up first if it hasn't been done in a while. Start off with the simple, cheaper stuff first. If you do your regular maintenance when your supposed to, then you would have an easier time trouble shooting your problem.
|
|
Offline
|
|
Jul 25, 2009, 12:15 AM
|
#10
|
|
Evolving Member
Personal Sales Rating: ( 14)
Join Date: Feb 2007
Location: Brooklyn, NY
Posts: 175
Drives: 03 EVO8
|
It is probably your ISCV.
|
|
Offline
|
|
Jul 25, 2009, 12:23 AM
|
#11
|
|
Evolved Member
Personal Sales Rating: ( 13)
Join Date: Oct 2006
Location: washington
Posts: 779
Drives: 2003 Lancer ES-T 2001 Civic LX 2001 Dodge Ram 1500 Pickup
|
Quote:
Originally Posted by Chele
I'd say do a tune up first if it hasn't been done in a while. Start off with the simple, cheaper stuff first. If you do your regular maintenance when your supposed to, then you would have an easier time trouble shooting your problem.
|
I agree I would go through change plugs, fuel filter, air filter, etc. Just to be sure and can write those off as not the issue
__________________
16G Turbo build: Build completed tuning time
|
|
Offline
|
|
Jul 25, 2009, 09:19 AM
|
#12
|
|
Evolved Member
Personal Sales Rating: ( 14)
Join Date: Jun 2003
Location: Buffalo Grove, IL
Posts: 1,427
Drives: '03 Evo brain'd Lancer OZ-T
|
Does adjusting your BISS make any difference? Does it act the same when the engine is cold started as it does at temp?
__________________
Evo ECU Swap for 4G94 Lancers: How-To
4G94 Lancer EcuFlash Master Definition List: Download
4G94 Lancer Bigger MAF Swap: How-To
Lancer Factory Service Manuals: Download
|
|
Offline
|
|
Jul 25, 2009, 11:04 AM
|
#13
|
|
Evolving Member
Personal Sales Rating: ( 13)
Join Date: May 2009
Location: Cape Coral, Florida
Posts: 128
Drives: Evil 8
|
Quote:
Originally Posted by senate6268
Does adjusting your BISS make any difference? Does it act the same when the engine is cold started as it does at temp?
|
Don't mess with the BISS screw. It's one of those things that you never mess with unless it's leaking. Only time you would need to adjust it is "maybe" when you replace the throttle body or have to replace the BISS screw because it is leaking. Just like the old saying, "if it ain't broke, don't fix it".
|
|
Offline
|
|
Jul 25, 2009, 01:52 PM
|
#14
|
|
Evolved Member
Personal Sales Rating: ( 14)
Join Date: Jun 2003
Location: Buffalo Grove, IL
Posts: 1,427
Drives: '03 Evo brain'd Lancer OZ-T
|
Well without adjusting your BISS to see if your engine can be corrected from it's cold start idle, I'm leaning towards a bad IAC motor. Give your throttle body a good cleaning. Have you done the "coolant bypass" mod to your throttle body, by chance?
__________________
Evo ECU Swap for 4G94 Lancers: How-To
4G94 Lancer EcuFlash Master Definition List: Download
4G94 Lancer Bigger MAF Swap: How-To
Lancer Factory Service Manuals: Download
|
|
Offline
|
|
Jul 25, 2009, 02:29 PM
|
#15
|
|
Evolving Member
Personal Sales Rating: ( 13)
Join Date: May 2009
Location: Cape Coral, Florida
Posts: 128
Drives: Evil 8
|
Once you have done your tune up stuff, if there's still a problem, I would say it's the egr valve or O2 sensor. Just my .O2 lol
|
|
Offline
|
|
 |
|
|
Tags
|
02, 2002, 2003, aftermarket, buffalo, car, cheap, dealership, die, evo, lancer, mitsubishi, oz, tuning, turbo, turbos  |
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
| |
|