 |
Sep 11, 2009, 10:17 PM
|
#1
|
|
Evolved Member
Personal Sales Rating: ( 25)
Join Date: Dec 2004
Location: Central FL
Posts: 915
Drives: IX
|
Color match for interior a pilliars?
Im curious if anyone has matched the color to the stock interior a pilliars successfully? If so what paint did you use thanks
|
|
Offline
|
|
|
Sep 12, 2009, 12:54 AM
|
#2
|
|
Evolved Member
Personal Sales Rating: ( 35)
Join Date: Aug 2008
Location: Louisiana
Posts: 1,805
Drives: Nissan 350z eclipse spyder eclipse hardtop 08 lancer 03 lancer evolution
|
I have done interior and door seals not a pillars I'm going to wrap mine in carbon fiber
__________________
Installed
Aps intercooler,INvidiaExhaust,MishimotoRadaitor, Eclipse Dvd/Nav/Tv AIT Racing Kit, JDM Rear ,Vis CarbonFiber Trunk ,Riser APR GTC 200, APS Bov, T-Rex BBY CarbonFiber Hood
Waiting
ebay ported 02, Exedy Twin Carbon, Met.Black Buschur Throttle Body, Splitter Garage HRS Carbon Kevlar, Met.Black PPI Intake Manifold, "undercut" head studs, Perrin FuelRail, Mike@AwdMotorsports built evo8head, AMS Fuel Line, PTE 1000cc
Ordered
Motor-RX 2.3 Shortblock, FP BLACK TURBOCHARGER
|
|
Offline
|
|
|
Sep 12, 2009, 01:01 AM
|
#3
|
|
Newbie
Personal Sales Rating: ( 0)
Join Date: May 2008
Location: pasadena
Posts: 22
Drives: evo
|
i bought mine at lancershop.com painted the same color as my stock interior
|
|
Offline
|
|
|
Sep 12, 2009, 01:16 AM
|
#4
|
|
Evolving Member
Personal Sales Rating: ( 1)
Join Date: May 2008
Location: New West/Vancouver
Posts: 155
Drives: 05 Evo 8 (WE Drive) and 94 Civic Si (DD)
|
how does that look from the outside infront of the car?
does it look bulky at all (because the lighter colour pillar stands out than the black one)?
can you please take a picture?
__________________
EVO FTW
|
|
Offline
|
|
|
Sep 12, 2009, 01:26 AM
|
#5
|
|
Newbie
Personal Sales Rating: ( 0)
Join Date: May 2008
Location: pasadena
Posts: 22
Drives: evo
|
it look alittle bigger but i still like it better then the black one i had the black pillar and i like this one better
|
|
Offline
|
|
|
Sep 12, 2009, 09:13 AM
|
#6
|
|
Evolved Member
Personal Sales Rating: ( 25)
Join Date: Dec 2004
Location: Central FL
Posts: 915
Drives: IX
|
hmmm im looking to do some fiberglassing on mine, was debating on matching them back to the stock color or going black and then doing a black suede roof
|
|
Offline
|
|
|
Sep 14, 2009, 09:37 PM
|
#7
|
|
Newbie
Personal Sales Rating: ( 0)
Join Date: Jul 2009
Location: Minnesota
Posts: 4
|
I'm a body man. If your looking for a rattle can good luck. If you go to your closest Auto Value or parts store that sells Paint products for body shops they should be able to look up interior colors also. There are interior resins that are used for painting anything plastic or vynal. I have only used Dupont products so that's all I know. I forget the # on it but it's a vynal resin that can be bought in a high, med, or low gloss and the color is added to that. They should be able to mix it on the spot or give you the color formula. Then you would have to have it sprayed on but I can tell you all those steps too so all that you would need is to have it sprayed ant that's all they would have to do at the body shop. They cant charge you much for 30 min. of work and a couple hrs of dry time.
|
|
Offline
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
| | 
|
