New Evolution X Products!! T3/T4/TS Top Mount Turbo Kits! Stock Turbo Manifold!!

[Bear.914]

bump for dyno graphs and pics ?...was this close to a bolt on, or was there cutting and shaving to fit ?

[ETS Michael]

The car should be getting dyno'd this week late next. It's a direct bolt on turbo kit w/ no cutting at all! GotEvo? might have a couple pics he can post up.

[joshevo22]

I think i found my new turbokit for next summer!!! Hopefully i can be running full ETS parts.

[gotevo?]

I currently have the car in the garage. I will post some pics in a couple hours

[ETS Michael]

Awesome! Thanks man! I can't believe we didn't snap pics when the car was in the shop =) The kit looks amazing on the vehicle.

[gotevo?]

Originally Posted by ETS Michael

Awesome! Thanks man! I can't believe we didn't snap pics when the car was in the shop =) The kit looks amazing on the vehicle.

Just wanted to say it feels like a monster even untuned... You guys really hit the nail on the head with this setup! TY!

Man, I took some quick pics before I ran it over to English racing for clutch and other goodies to be put on!! The pics are kinda bad so please excuse me... we'll get better ones when I bring it over for a dyno... which I can't hardly wait for!!!!!!!!!!!



sorry for bad focus on this shot
















I just removed the foglights yesterday... the car needs to get dropped real bad... and is getting dropped in couple days... only on eibachs... also putton some rota grids on with the new nt05s.. should be a nice looker and faster mover when done.. lol

[ETS Michael]

Looking good! I can't wait to get the car on the dyno =)

[jackygor]

Omg sleeper LOL

[weap0n]

Wow that looks great.

Which kit is that?

[ETS Michael]

Originally Posted by jackygor

Omg sleeper LOL

Originally Posted by weap0n

Wow that looks great.

Which kit is that?

35R Top Mount Turbo Kit.

[Girodisc Martin]

We are getting the Girodisc EVO dyno tuned on Sat so well have good numbers with:

ETS Intake
ETS Intercooler
ETS Intercooler Hardpipes
ETS Manifold
ETS DP (external dump)
ETS Test Pipe
ETS Exhaust
AP BOV
COBB Accessport

We'll have some pics and vids up Monday as well.

Thanx ETS we would never put anything on our car!

[Paul Nelson]

Originally Posted by ETS Michael

Here are couple sneak peak shots of our turbo kits and stock replacement manifold for the Evolution X - We will start testing in the next couple of weeks.

Stock Replacement Manifold - $899.00



Utilizing a Tubular Equal Length design, and retaining the Twin Scroll features of the stock turbocharger, the ETS Stock Replacement Manifold offers substantial improvements over the economical factory cast unit. The heart of the ETS stock replacement manifold is the Twin Merge Collectors at the turbine inlet. Unlike the factory unit, where exhaust gasses collide head on into each other, the twin ETS Merge Collectors align the exhaust flow in the direction of the turbine for fast spool and more top end power. Adding to the high flow, the equal length runners make sure all cylinders are tuned the same.

T3 Top Mount Turbo Kit - $4600.00 (35R)



For serious power upgrades on the Evo 10 look no further than an ETS Turbo Kit. Packed with features like high flowing Equal Length ETS Manifold, true Merge Collector, full 3” Downpipe, direct routed Wastegate Dump, low angle turbo outlet, high flow upper intercooler pipe, Tial 44mm Wastegate, and any T3/T4 or Garrett GT series turbos, these kits will get the job done, street or track. Along with great performance, Features such as an exhaust flex, T-Bolt Clamps, 4ply silicone, and braided oil lines, will help make sure that you do not have to use the ETS Life Time Warranty!

T3 Top Mount Twin Scroll Turbo Kit - $5290.00 (35R)



If fast spool is what you need, then an ETS Twin Turbo Kit is what you’re looking for. A twin scroll turbo kit will typically spool the same turbo 300-500rpm faster than a conventional manifold design. This is accomplished by pairing the correct cylinders in the firing order together, so that the pressure waves arrive at the turbo 180deg apart, making a stronger impact upon the turbine wheel and thus accelerating the turbo faster. Another benefit of opposite cylinder pairing is that when one exhaust valve is open, the exhaust valves of the other cylinder in the pair are closed. 180deg. apart, helping spool the turbo quicker with no loss of top end power.

T4 Top Mount Twin Scroll Turbo Kit - $5580.00 (40R)



Knowing how hard big T4 Turbos are to spool with a 2.0l engine, a twin scroll manifold is desirable for T4 based Turbos such as the GT40r, T04z, and the Gt35r-T4. The Large T4 exhaust sections of these turbos will make big power above 7000rpm, and the twin scroll pressure pulse manifold design helps spool these large turbos sooner than later. Utilizing dual wastegates, the exhaust pressure waves of cylinders 1&4 are kept separate of 2&3 so that they can impact the turbine wheels individually, 180deg. apart, helping spool the turbo quicker with no loss of top end power.

Turbo Kit Intake



Installed Pics












Finished Product







We are hoping to have the kit installed in the next two weeks with results posted. We will be offering a discounted price for the first 5 people. we are going to be offering a $1,000 discount for the 5 demo kits. This will give us customer feed back in case there is anything the market does not like. A good example is the blue silicone, we have a few customers that love the blue silicone, while the majority seems to like black.

We plan on shipping the first demo kits, 2 weeks after our dyno results are posted. This will give us time to drive the car around and make any changes we feel are necessary.


All the same options will be available

Manifold
- Stock
- Polished
- Ceramic Coated

Turbine Housing
- Stock
- Ceramic Coated

Downpipe
- Stock
- Polished

Wastegate
- 1x 44mm on single scroll
- 2x 38mm twin scroll (NEW! Slim V-Band 38mm TiAL)

Turbochargers (Ball Bearing and Journal Bearing)
- Precision
- Garrett
- HTA
- CBRD

WOW looks awesome guys! Man ya making me want to buy a 10! Whats the most power you have gotten out of the 10 so far?

[gotevo?]

updated pics of the car... still not dynoed yet.....

ETS 35r, Gun metallic GRIDs on WW X

[firstaltevox]

Wow great project bro. I have the same setup now I can see wat my basic numbrs can be tanx. 4 leading da pack mad respect keep it up

[ETS Michael]

Alright Guys! Special pricing has been added to the website.

http://www.extremeturbosystems.com/M...324/index.html