http://forums.evolutionm.net Discuss general EMS tuning concepts that do not pertain to a specfic brand or product. en Fri, 20 Nov 2009 23:55:30 GMT vBulletin 60 http://images.ibsrv.net/ibsrv/res/src:forums.evolutionm.net/get/images/misc/rss.jpg http://forums.evolutionm.net http://forums.evolutionm.net/general-engine-management-tuning-forum/459279-evo-8-high-idle-problems.html Fri, 20 Nov 2009 00:57:36 GMT hey guys i got a evo 8 which is throwing high idle code its idling around 1200-1600 and surges when slowing down when not it gear. it also throwing insufficient egr flow and multiple random misfire. it has not vacuum leaks and i have replaced the iac, map. mods exedy twin disk clutch comp 280... hey guys i got a evo 8 which is throwing high idle code its idling around 1200-1600 and surges when slowing down when not it gear. it also throwing insufficient egr flow and multiple random misfire. it has not vacuum leaks and i have replaced the iac, map.
mods
exedy twin disk clutch
comp 280 cams
megan racing exhaust manifold
hks high flow intake
hks turboback exhaust
hks turbo timer.
oh when im really getting on it it becomes to rich right when i first shift into second and stall out for a sec or two then it comes too and runs amazing,
before i bought the car it hasd a meth kit in it btw if thats any help ]]> General Engine Management / Tuning Forum joshewa2688 http://forums.evolutionm.net/general-engine-management-tuning-forum/459279-evo-8-high-idle-problems.html http://forums.evolutionm.net/general-engine-management-tuning-forum/459097-pte-780cc-specifications.html Thu, 19 Nov 2009 00:21:19 GMT Can anyone help me getting the specs for these injectors??? This is all I found on their website: Partnumber: 043-0780 Flowrate: 780cc Impedance: Low Resistance: 2 Ohm Opening ms: 1.130 Closing ms: 0.998 Can anyone help me getting the specs for these injectors???

This is all I found on their website:
Partnumber: 043-0780
Flowrate: 780cc
Impedance: Low
Resistance: 2 Ohm
Opening ms: 1.130
Closing ms: 0.998

But I also need to know on what fuelpressure it was measured and numbers at 3 voltages including 14v.

I already e-mailed them, no reply yet. ]]> General Engine Management / Tuning Forum Dragracer187 http://forums.evolutionm.net/general-engine-management-tuning-forum/459097-pte-780cc-specifications.html http://forums.evolutionm.net/general-engine-management-tuning-forum/458636-evoscan.html Mon, 16 Nov 2009 19:05:37 GMT I had evoscan on my computer. I had a virus attack it and I now dont have evoscan due to the need to reformat the hdd on the laptop. I have sent an email to limitless about redownloading the software. Does anyone know if I have to buy it again or if there is a way to download it with the... I had evoscan on my computer. I had a virus attack it and I now dont have evoscan due to the need to reformat the hdd on the laptop. I have sent an email to limitless about redownloading the software. Does anyone know if I have to buy it again or if there is a way to download it with the confirmation number?

Thanks ]]> General Engine Management / Tuning Forum batty200 http://forums.evolutionm.net/general-engine-management-tuning-forum/458636-evoscan.html http://forums.evolutionm.net/general-engine-management-tuning-forum/458503-help-tune.html Sun, 15 Nov 2009 23:16:22 GMT I am a former sti owner and ik that the cobb ap2 did alot if you had an intake and tbe. is it the same with the evo. i have an IX MR and i want to do basic intake and turbo back is the cobb beneficial to get or should i spend my money elsewhere. any input would be greatly appreactiated. I am a former sti owner and ik that the cobb ap2 did alot if you had an intake and tbe. is it the same with the evo. i have an IX MR and i want to do basic intake and turbo back is the cobb beneficial to get or should i spend my money elsewhere. any input would be greatly appreactiated. ]]> General Engine Management / Tuning Forum Dre1189 http://forums.evolutionm.net/general-engine-management-tuning-forum/458503-help-tune.html http://forums.evolutionm.net/general-engine-management-tuning-forum/458343-vishnu-experiences.html Sat, 14 Nov 2009 21:58:13 GMT Coming from an SC S2000, I am a new Evo VIII MR owner and I am looking to do some minor power mods. Really looking for 300-350whp from what I have been reading it seems pretty easy to do with these cars. I came across "Vishnu" power packages but I don't see a whole out of people using these products. I know they were big in the Evo community for awhile but I am looking for any useful feedback with owners using Vishnu product/power packages etc.... ]]> General Engine Management / Tuning Forum tdubbz http://forums.evolutionm.net/general-engine-management-tuning-forum/458343-vishnu-experiences.html http://forums.evolutionm.net/general-engine-management-tuning-forum/458197-gauges-your-laptop-ecu.html Thu, 12 Nov 2009 23:45:06 GMT So i have an openport 1.3 and a laptop, is it possible to have Zeitronix or something where i can have A/F ratio and boost and volts or whatever on my laptop buy just having it conected through the 1.3 to the ecu? is there any sort of software that would alow me to have this while the car is... So i have an openport 1.3 and a laptop, is it possible to have Zeitronix or something where i can have A/F ratio and boost and volts or whatever on my laptop buy just having it conected through the 1.3 to the ecu?
is there any sort of software that would alow me to have this while the car is runing? so i dont need to buy and install actual gauges ]]> General Engine Management / Tuning Forum adammartini http://forums.evolutionm.net/general-engine-management-tuning-forum/458197-gauges-your-laptop-ecu.html http://forums.evolutionm.net/general-engine-management-tuning-forum/457947-need-help-how-plug-hyper-force-system.html Wed, 11 Nov 2009 11:50:00 GMT How the title says, need help (pics or instruction) how to plug this system, many thanks How the title says, need help (pics or instruction) how to plug this system, many thanks ]]> General Engine Management / Tuning Forum Lukelis http://forums.evolutionm.net/general-engine-management-tuning-forum/457947-need-help-how-plug-hyper-force-system.html http://forums.evolutionm.net/general-engine-management-tuning-forum/457835-hks-f-con-v-pro.html Tue, 10 Nov 2009 22:17:34 GMT Anybody using it? Do you recommend it? Where can I get some information about it on 4g63? My ride is Evo VI TME Thanks Anybody using it? Do you recommend it? Where can I get some information about it on 4g63? My ride is Evo VI TME

Thanks ]]> General Engine Management / Tuning Forum RUN99 http://forums.evolutionm.net/general-engine-management-tuning-forum/457835-hks-f-con-v-pro.html http://forums.evolutionm.net/general-engine-management-tuning-forum/457760-ticks-over-up-down.html Tue, 10 Nov 2009 16:33:07 GMT on my:mitsu: 4 the revs will go where it wonts on tick over.

start car when cold - [ tick over at around 500 ] so i have to keep it in

after a mile it might tick [ 900 ]

when warm [ 1800 ]

when hot [ 1000 ] or [ 1800 ]

when standind still it will rev up and down [ 800 / 2000 ].

sometimes it will rev from 1000 upto 1400 then drops back to 1000 all of the time on its own
:helpme:

when driving - when i push the cluch in the car will drop and cut out or just stays in then it will go up to [ 1.1 ]

i have changed throttle body and a hks eids no change :helpme: ]]> General Engine Management / Tuning Forum pistonpat http://forums.evolutionm.net/general-engine-management-tuning-forum/457760-ticks-over-up-down.html http://forums.evolutionm.net/general-engine-management-tuning-forum/457113-zietronix-wideband.html Fri, 06 Nov 2009 18:08:50 GMT zietronix wideband (http://forums.evolutionm.net/lancer-general/456922-zietronix-wideband.html) can anyone help me here i posted this in the lancer general forum with no response. any help would be appreciated! thanks josh zietronix wideband

can anyone help me here i posted this in the lancer general forum with no response.


any help would be appreciated!

thanks
josh ]]> General Engine Management / Tuning Forum JRR http://forums.evolutionm.net/general-engine-management-tuning-forum/457113-zietronix-wideband.html http://forums.evolutionm.net/general-engine-management-tuning-forum/456819-apexi-neo.html Thu, 05 Nov 2009 02:37:52 GMT So i was getting all set to get the E01 with the blue pigy back but i saw this neo that says it is a boost controller and a airfuel controller. so if i got just this neo would i be able to tune the air/fuel and boost without a piggyback? does this little thing act as its own piggyback? So i was getting all set to get the E01 with the blue pigy back but i saw this neo that says it is a boost controller and a airfuel controller. so if i got just this neo would i be able to tune the air/fuel and boost without a piggyback? does this little thing act as its own piggyback? ]]> General Engine Management / Tuning Forum adammartini http://forums.evolutionm.net/general-engine-management-tuning-forum/456819-apexi-neo.html http://forums.evolutionm.net/general-engine-management-tuning-forum/456407-problems-possible-spark-blow-out.html Tue, 03 Nov 2009 03:05:18 GMT well after getting my car back with only changing the downpipe, and gauges my car now studders when under wot. The car drives perfect under normal driving, but as soon as i lean into it it acts as if it is having spark blow out.. the plugs are fresh. also my old gauge read 26psi, but the aem reads... well after getting my car back with only changing the downpipe, and gauges my car now studders when under wot. The car drives perfect under normal driving, but as soon as i lean into it it acts as if it is having spark blow out.. the plugs are fresh. also my old gauge read 26psi, but the aem reads 28!? turned it down 2 psi, and same thing.
Any ideas? ]]> General Engine Management / Tuning Forum whiptheevo8 http://forums.evolutionm.net/general-engine-management-tuning-forum/456407-problems-possible-spark-blow-out.html http://forums.evolutionm.net/general-engine-management-tuning-forum/456394-modding-car-has-been-previously-tuned.html Tue, 03 Nov 2009 02:03:29 GMT So I been buying some parts and just want to know if im safe. My car was tuned on stock boost, with a full tbe and highflow cat, and a drop in k and n filter and it was tuned to max out with no knock. What i did/will do: I took out the highflow cat and replaced it with a testpipe and... So I been buying some parts and just want to know if im safe.

My car was tuned on stock boost, with a full tbe and highflow cat, and a drop in k and n filter and it was tuned to max out with no knock.

What i did/will do:

I took out the highflow cat and replaced it with a testpipe and have not really noticed a difference in afr's (around 11.5-11.7)... Dont know about knock as i havent logged the car yet... is it something to be concerned about?

im about to put on a perrin intake and want to know if it will be safe... will it cause knock? supposedly it doesnt mess with afr's but it does raise the boost.

i later plan on getting a licp, uicp, boost controller(@22-23 psi) and a front mount. at that point i will be getting tuned though ]]> General Engine Management / Tuning Forum Paulito http://forums.evolutionm.net/general-engine-management-tuning-forum/456394-modding-car-has-been-previously-tuned.html http://forums.evolutionm.net/general-engine-management-tuning-forum/456139-motec-maps.html Sun, 01 Nov 2009 23:35:26 GMT Hello guys, im using a plug and play motec m800 and i need the maps for the ecu. my mods are stock cams , 880 cc injector, old green , 24 psi , bigger intercooler and thast pretty much it ! if someone can hepl me???? thanks Hello guys, im using a plug and play motec m800 and i need the maps for the ecu.
my mods are stock cams , 880 cc injector, old green , 24 psi , bigger intercooler and thast pretty much it !
if someone can hepl me????


thanks ]]> General Engine Management / Tuning Forum kemoly http://forums.evolutionm.net/general-engine-management-tuning-forum/456139-motec-maps.html http://forums.evolutionm.net/general-engine-management-tuning-forum/456100-usb-serial-adaptor-tactrix-cable.html Sun, 01 Nov 2009 18:53:45 GMT My question is do I even need the usb to serial adaptor like mellontuning's website explains if my laptop does not have a serial port? the tactrix cable has a usb connection. I just dont know if it will still transfer data correctly or not. ]]> General Engine Management / Tuning Forum jdub187 http://forums.evolutionm.net/general-engine-management-tuning-forum/456100-usb-serial-adaptor-tactrix-cable.html