Greddy Type-S Coilovers for your EVO X !!!!! We got them IN stock!!!

[Speed Element]

Here's the new / just release Greddy Type-S coilovers.

We have these with 8KG front and Rear springs, but we can also order different spring rates. You can go 2KG higher or lower.




Designed for the optimum balance of traction, comfort, and adjustability, GReddy Type-S suspension kits offer the finest features like: large 46mm dia. pistons in a Mono-tube shock, 32 way adjustable damping, adjustable base and spring perches, thick billet upper mounts, and a lightweight coil springs. Instead of the common heavy spring rates, that offer harsh rides and easily loose traction on bumpy American roads, Type-S systems utilize a relatively softer spring with a longer stroke to maximize traction on the streets and track. An added benefit of this is also a comfortable ride for the street. Applications available for many popular Japanese vehicles.

spec:
*Four Corner, Full Length Adjustable Ride Height

With an adjustable threaded base and spring perch height adjustments can be made without sacrificing spring preload or shock stroke. Even with a lower ride height, by maintaining stroke, bottoming out can be prevented, thus maintaining traction even when hitting a dip while corning. In addition, by having both adjustments for the front and rear, it is possible to adjust ride height in millimeter increments if desired.

*32 way adjustable dampening

By using a special 32 way valve needle, compression and rebound dampening can be simultaneously adjusted to suit both street and track use. The precise changes allow for sporty handling while still maintaining a comfortable ride.

*Adjustable Spherical Bearing Upper Mounts

(pillow-ball) Standard equipment on vehicles equipped with front struts are adjustable spherical bearing upper mounts. The thick 10mm aluminum upper plates are precisely marked for secure and accurate camber adjustments. While the use of replaceable spherical bearings add extended life and cost effectiveness to the system.

*Mono Tube Shock Design

The use of a large 46mm diameter piston in a Mono-tube shock design provides quick reacting dampening, even during low speed driving. While, the construction of the case is not only lightweight, but also designed to be very rigid.

*Strengthened Rubber Bushing Upper Mounts & Billet Aluminum Brackets

For non-strut type applications, a thick 33mm strengthened rubber bushings on sturdy 10mm billet aluminum upper mount and lightweight billet aluminum brackets are used. This offers both exceptional noise reduction and very controllable handling profile.

* Lightweight High-grade Coil Springs

All systems employ a special high strength steel (SAE9254) in it’s coil spring. This allows the springs to have the optimum balance of precise stroke, durability and lightweight. Rear springs are designed with 250mm (unless listed otherwise) variable springs to maximize the rebound stroke. This inhibits loosing traction when "lifting" while cornering. It also contributes to stable traction in wet or dry road conditions.


$1530 Shipped!! Give us a call or paypal: sales@speedelement.com to order!

[tres-equis]

I want this, I will get this..

[asng]

does it come with front camber plate? is there an extension for a rear damping adjustment?

[Speed Element]

Originally Posted by asng

does it come with front camber plate? is there an extension for a rear damping adjustment?

YES and YES to both of you questions.


thank you

[asng]

got pix of the camber plate and the extension??

[Speed Element]