-= DIY A's EvoX Blackout Taillight =-

[MonsterParadise]

Parts Required
- Masking Tape
- 2 set of diamond cutting wheel 3/8 and 1/2
- Dupli-Color Engine Enamel low gloss black, Dupli-color sandeable primer, and Dupli-Color clear coat from Kragen.

- Tools Required
- Phillips Screwdriver
- Flathead Screwdriver
- Dremel
- Sealant
- 4 Clamps

- Recommended Number of People
- 1 Person

- Difficulty
- 2/5

- Time to complete
It's hard to say so I break it in to small tag.
- Cutting 4 of tail light about 1 hour.
- Clean up mess in the "Pink" cover about 0.5 hour.
- Taping about 2 hours .
- Painting inside the housings about 2 hours.
- Putting the housings and the cover back, using sealant and clamp, let's it dry for 8 hours (over night).
- Paint the edge of the light about 2 hours.
-Clean up and put it back to the car about 1 hours.

-Credit
Thanks xPRimNT for his xPRimNT's Tail Light Project. I used some infor from his threa.

Ok! now times for Pics

Video
http://www.youtube.com/watch?v=rrGhTnGNSho

[total0wnage]

thats pretty sick.. idk if i would do it to my car, i might change up the parts that u blacked on the lens and stuff but thats defintly different- in a good way so. +1

[its reu]

that looks sick

[MonsterParadise]

Originally Posted by total0wnage

thats pretty sick.. idk if i would do it to my car, i might change up the parts that u blacked on the lens and stuff but thats defintly different- in a good way so. +1

Thanks! Ill if you are local

[total0wnage]

on local as in domestic otherwise on the other side of the country lol, im in New jersey, as ur profile says california so ya... lol

[spoolme]

nice nice

[flyboytb]

wow this came out really good... I love them. I would do it the same way minus the dot in the center off the brake lights.

[MonsterParadise]

Thanks guys

[Frankiago]

The lens cover is not too pink for your liking?

I'm gonna hold off on this project until it gets warm again... but I found my Dremel. I liked the way xPRimNT's light coat of NiteShades turned out so I'll go that route to do away with some of the pink look.

Your paint scheme makes me want to play darts on your tails though

[Sleestack]

Fantastic job. That looks great. I didn't think I would want to mess with my lights but your picture is making me think otherwise.

[mmartahus]

awesome project!

[tomeks]

good job!

[MonsterParadise]

Originally Posted by Frankiago

The lens cover is not too pink for your liking?

I'm gonna hold off on this project until it gets warm again... but I found my Dremel. I liked the way xPRimNT's light coat of NiteShades turned out so I'll go that route to do away with some of the pink look.

Your paint scheme makes me want to play darts on your tails though

Yeah, I bought 2 can of nightshades and was ready to use it. However, when i put everything together, I feel it look better in this way. Everyone have their own taste
BTW I used nightshade in my 350z tail and scion tc head and tail before.

[lex08gsr]

Dang looks sick bro!

[AHAZZARD]

i like .... especially knowing that i dont have to spend a lot of money to get what i want.