Evo X Engine / Turbo / DrivetrainEverything from engine builds to the best clutch and flywheel.
Welcome to EvolutionM.net!
Welcome to EvolutionM.net.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
My clutch pedal rests about 3/4" higher than the brake, which gets in the way of using the left foot to brake. Is there a simple way to lower the clutch pedal while still having the clutch disengage completely?
on a oem cmc no... if you upgraded your cmc to a magnus there is some adjustability, but can only go so far before your clutch is slightly engaged even though it feels as though it is not.. if that makes any sense..
MAP EF2.5, DW1000 injectors, AMS UICP / INTAKE, GS 3 PORT, MAP O2 ELIMINATOR DP, CP-E RESONATED CBE, RB ET500 PADS, PROSPORT HOOD DAMPERS, CHET E-TUNE, ACT HD 6puck w/ Streetlite flywheel, Magnus kit w/ EVO 9 CMC, GTWORKS Tarmac springs, ETS 3" FMIC and HFC, RS fog delete, Zietronic LCD monitor WB, Boost, WhiteLine 27mm rear sway
or what might help, get some aftermarket pedals and see if you can make up the difference or close. if you tell them what your looking for they may be able to get you some custom ones. these are what most are using for aftermarket.