Wrong definition and address of some tables in the Ralliart

[joedr]

All,

Since there is no tuning section for the 09 RA, I decided that the closest place to post this is on the Evo X tuning forum.


It seems that the Idle and Torque Limiter tables are not defined for the RA or are skewed or not defined properly.

Is there a way where I can get the right definitions or addresses for these tables? Or, it is just that these tables have been defined/found yet! User error maybe?

The rom is 53600009 which inherits from 53600010.

Here are the screenshots:

[GST Motorsports]

<table name="Torque Limiter #1" address="6386d">
<table name="Throttle" address="63dce"/>
<table name="Y" address="63da6"/>
</table>

<table name="Torque Limiter #2" address="63963">
<table name="Throttle" address="63dce"/>
<table name="Y" address="63da6"/>
</table>

<table name="Torque Limiter #3" address="63a59">
<table name="Throttle" address="63dce"/>
<table name="Y" address="63da6"/>
</table>

<table name="Torque Limiter #4" address="63b4f">
<table name="X" address="63e8e"/>
<table name="Y" address="63df0"/>
</table>

<table name="Flow Check table" address="63c19">
<table name="X" address="63ed0"/>
<table name="Y" address="63eb8"/>
</table>

[joedr]

Thanks GST!

What the number on the cell represents? Their range is from 134-151 but not sure what they are refering to.



Also... since there are different addresses for the tq lim tables. Can I assume those are different as well for the idle ones?