 |
|
Oct 31, 2009, 07:51 PM
|
#826
|
|
Evolved Member
Personal Sales Rating: ( 10)
Join Date: Oct 2003
Location: Rosedale, IN
Posts: 2,508
Drives: 2010 Ralliart Sportback.
|
Quote:
Originally Posted by FTY Motorsports
ya i tried getting it to work with most of the current configs on evoscan and i got nothing lol just some crazy values haha. i have a pretty complete definition of the 2010 GSR USDM ROM i got from acamus. it has most of the tables that you use when tuning. i just wish i could log the damn thing dont have our dyno yet so still street tuning.
|
There is some code posted in this thread:
How do you learn to be a developer?
It will allow logging of some of the basic items... it's a great start!
Keith
__________________
2010 Lancer Ralliart Sportback... From stock to modified as follows in less than a week!
Buschur Racing FMIC, upper IC pipe, and lower IC pipe with EVO X BOV. AMS cat back exhaust, mini battery kit, and MAF housing from EVO X,Buschur Air filter mounted to EVO X MAF housing. Forge WG actuator, Ultimate Racing high flow cat.
Triple gauge pod with Wide band A/F ratio and boost.
|
|
Offline
|
|
|
Nov 4, 2009, 08:52 AM
|
#827
|
Personal Sales Rating: ( 0)
Join Date: Sep 2009
Location: california
Posts: 137
Drives: evo
|
tephra posted up the codes for the rom but evoscan running any of the mode23's will not work. evoscan needs to be updated for the 2010 addresses is what i mean. atleast i think i mean that haha. i was experimenting last night and none of them work wortha ****. if i could log boost and knock i'd be happy i got my trusty wideband
__________________
FLAT RATE TUNING
$200!!!!!!!
Includes:
ECU Boost
MBC
EBC
91
93
100 oct/Race Gas
E85
Located in SoCal
Anahiem Mitsubishi will beat any price by any dealer anywhere! PM me about FREE shipping in the continental US!!! Ask me about FREE Kenwood Double Din Navi with purchase!!
Give me a call (818) 486-1395
|
|
Offline
|
|
|
Nov 4, 2009, 10:30 AM
|
#828
|
|
Silver Sponsor
Personal Sales Rating: ( 4)
Join Date: Sep 2007
Location: Hayward
Posts: 1,886
Drives: EVO, STI
|
Quote:
Originally Posted by FTY Motorsports
tephra posted up the codes for the rom but evoscan running any of the mode23's will not work. evoscan needs to be updated for the 2010 addresses is what i mean. atleast i think i mean that haha. i was experimenting last night and none of them work wortha ****. if i could log boost and knock i'd be happy i got my trusty wideband
|
Please file a support ticket with evoscan so it gets the attention of Hamish.
- Bryan
|
|
Online
|
|
|
Nov 4, 2009, 12:22 PM
|
#829
|
|
Silver Sponsor
Personal Sales Rating: ( 28)
Join Date: Aug 2005
Location: Memphis, Tennessee
Posts: 6,395
Drives: 05 EVO & 91 Stealth TT
|
I have a ticket open about the aem freeze while logging and random bsod with 2.6 (no problems with 2.5)
|
|
Offline
|
|
|
Nov 4, 2009, 12:33 PM
|
#830
|
|
Evolving Member
Personal Sales Rating: ( 0)
Join Date: Sep 2007
Location: Over there!
Posts: 178
|
I know you probably don't have an option to do this on customer cars...but tapping the output into the stock harness = t3h win for logging :-P No additional serial cable to hook up! Wooo hoo!!
verkion
|
|
Offline
|
|
|
Nov 4, 2009, 02:41 PM
|
#831
|
|
Evolved Member
Personal Sales Rating: ( 1)
Join Date: Jun 2008
Location: Kanagawa, Japan
Posts: 760
Drives: Lancer Evo X GSR
|
Quote:
Originally Posted by FTY Motorsports
tephra posted up the codes for the rom but evoscan running any of the mode23's will not work. evoscan needs to be updated for the 2010 addresses is what i mean. atleast i think i mean that haha. i was experimenting last night and none of them work wortha ****. if i could log boost and knock i'd be happy i got my trusty wideband
|
If you can post the ROM & XML file for the 2010 GSR & MR, I should be able to find the addresses for Evoscan.
|
|
Offline
|
|
|
Nov 4, 2009, 02:57 PM
|
#833
|
|
Evolved Member
Personal Sales Rating: ( 1)
Join Date: Jun 2008
Location: Kanagawa, Japan
Posts: 760
Drives: Lancer Evo X GSR
|
Quote:
Originally Posted by GST Motorsports
|
If I have time, I'll post up the basic logging addresses today 
|
|
Offline
|
|
|
Nov 4, 2009, 03:52 PM
|
#834
|
|
EvoM Guru
Personal Sales Rating: ( 3)
Join Date: Mar 2007
Location: Melbourne, Australia
Posts: 5,599
Drives: WW EvoX GSR
|
Guys - use the MUT table to reference common items... rpm/boost/knock etc...
__________________
AUDM Black Evo IX 07 spec - writeoff thanks to someone that doesn't understand what a STOP sign is!
AUDM Yellow Evo IX - writeoff thanks to me rolling it at the Phillip Island Grand Prix Circuit :(
AUDM White Evo X - Powered by Colby@Tactrix, Richard@Aquamist
TephraMOD V7 - ECU mods AltMap, NLTS, KnockLight, Valet, Boost Mods, BIGMAP + more
yes - I have given up emptying my Inbox
Michael Jackson - RIP!
|
|
Offline
|
|
|
Nov 4, 2009, 06:53 PM
|
#835
|
Personal Sales Rating: ( 0)
Join Date: Sep 2009
Location: california
Posts: 137
Drives: evo
|
thanks for the help guys im dying to tune our demo car with full boltons !!!
__________________
FLAT RATE TUNING
$200!!!!!!!
Includes:
ECU Boost
MBC
EBC
91
93
100 oct/Race Gas
E85
Located in SoCal
Anahiem Mitsubishi will beat any price by any dealer anywhere! PM me about FREE shipping in the continental US!!! Ask me about FREE Kenwood Double Din Navi with purchase!!
Give me a call (818) 486-1395
|
|
Offline
|
|
|
Nov 4, 2009, 08:16 PM
|
#836
|
|
Evolved Member
Personal Sales Rating: ( 10)
Join Date: Oct 2003
Location: Rosedale, IN
Posts: 2,508
Drives: 2010 Ralliart Sportback.
|
Quote:
Originally Posted by tephra
Guys - use the MUT table to reference common items... rpm/boost/knock etc...
|
How do you go about using the mut table? Mine looks nothing like the ones I have seen in the training vids, and I have no idea how to use it...
Thanks,
Keith
__________________
2010 Lancer Ralliart Sportback... From stock to modified as follows in less than a week!
Buschur Racing FMIC, upper IC pipe, and lower IC pipe with EVO X BOV. AMS cat back exhaust, mini battery kit, and MAF housing from EVO X,Buschur Air filter mounted to EVO X MAF housing. Forge WG actuator, Ultimate Racing high flow cat.
Triple gauge pod with Wide band A/F ratio and boost.
|
|
Offline
|
|
|
Nov 4, 2009, 10:30 PM
|
#837
|
|
Evolved Member
Personal Sales Rating: ( 1)
Join Date: Jun 2008
Location: Kanagawa, Japan
Posts: 760
Drives: Lancer Evo X GSR
|
Here's the basics:
RPM, Load, PSIG, Knock, MAT, IAT, ECT, Speed, and a few others.
I haven't tested these so backup your previous one just in case 
|
|
Offline
|
|
|
Nov 4, 2009, 10:40 PM
|
#838
|
|
Evolved Member
Personal Sales Rating: ( 1)
Join Date: Jun 2008
Location: Kanagawa, Japan
Posts: 760
Drives: Lancer Evo X GSR
|
Oh, I forgot to mention, the 2010 GSR & RA share the same MUT addresses so you can select 2010 Mode23 US EVOX RA from the drop down menu for both.
Does anyone have the 2010 MR ROM & XML so I can check those too?
|
|
Offline
|
|
|
Nov 5, 2009, 06:06 AM
|
#839
|
|
Evolved Member
Personal Sales Rating: ( 10)
Join Date: Oct 2003
Location: Rosedale, IN
Posts: 2,508
Drives: 2010 Ralliart Sportback.
|
Quote:
Originally Posted by SiC
Here's the basics:
RPM, Load, PSIG, Knock, MAT, IAT, ECT, Speed, and a few others.
I haven't tested these so backup your previous one just in case |
I downloaded the file, and when I try to open the zipped folder I get the following:
Compressed (zipped) Folders Error
The Compressed (zipped) Folder is invalid or corrupted.
I deleted the file and downloaded it again thinking it was a transfer error, but got the same error.
Keith
__________________
2010 Lancer Ralliart Sportback... From stock to modified as follows in less than a week!
Buschur Racing FMIC, upper IC pipe, and lower IC pipe with EVO X BOV. AMS cat back exhaust, mini battery kit, and MAF housing from EVO X,Buschur Air filter mounted to EVO X MAF housing. Forge WG actuator, Ultimate Racing high flow cat.
Triple gauge pod with Wide band A/F ratio and boost.
|
|
Offline
|
|
|
Nov 5, 2009, 01:50 PM
|
#840
|
|
Evolved Member
Personal Sales Rating: ( 1)
Join Date: Jun 2008
Location: Kanagawa, Japan
Posts: 760
Drives: Lancer Evo X GSR
|
Sorry, I don't know why it does that on some PCs, it works fine on my PC and my PC from work.
Just copy & paste the following into your Evoscan data.xml:
Code:
<ecu name="Mode 23 2010 US EVOX RA">
<Mode2 name="Mode2" type="Data List Items">
<DataListItem DataLog="Y" Color="" Display="RPM" LogReference="RPM" RequestID="23808763" Eval="31.25*x" Unit="rpm" MetricEval="" MetricUnit="" ResponseBytes="1" GaugeMin="0" GaugeMax="8000" ChartMin="0" ChartMax="8000" ScalingFactor="0.1" Notes="" Priority="1" Visible="False" />
<DataListItem DataLog="Y" Color="" Display="Load" LogReference="Load" RequestID="23808784" Eval="x*10/32" Unit="load" MetricEval="" MetricUnit="" ResponseBytes="2" GaugeMin="0" GaugeMax="300" ChartMin="0" ChartMax="300" ScalingFactor="1" Notes="" Priority="1" Visible="False" />
<DataListItem DataLog="Y" Color="" Display="TimingAdv" LogReference="TimingAdv" RequestID="23808A1f" Eval="x-20" Unit="deg" MetricEval="" MetricUnit="" ResponseBytes="1" GaugeMin="-10" GaugeMax="50" ChartMin="-10" ChartMax="50" ScalingFactor="1" Notes="" Priority="1" Visible="False" />
<DataListItem DataLog="Y" Color="#4b0000" Display="PSIG" LogReference="PSIG" RequestID="2380872e" Eval="(x/4*0.19347)-14.5" Unit="PSIG" MetricEval="" MetricUnit="" ResponseBytes="2" GaugeMin="0" GaugeMax="255" ChartMin="0" ChartMax="255" ScalingFactor="1" Notes="" Priority="1" Visible="False" />
<DataListItem DataLog="Y" Color="" Display="Knock Sum" LogReference="KnockSum" RequestID="23808A63" Eval="x" Unit="count" MetricEval="" MetricUnit="" ResponseBytes="1" GaugeMin="0" GaugeMax="20" ChartMin="0" ChartMax="20" ScalingFactor="1" Notes="" Priority="1" Visible="False" />
<DataListItem DataLog="N" Color="#90ff00" Display="External Wideband A/F Ratio" LogReference="WideBandAF" RequestID="WDB" Eval="x" Unit="a/f ratio" MetricEval="" MetricUnit="" ResponseBytes="1" GaugeMin="0" GaugeMax="20" ChartMin="0" ChartMax="20" ScalingFactor="10" Notes="Plug in your serial port from your wideband oxygen sensor if you have one." Priority="1" Visible="False" />
<DataListItem DataLog="Y" Color="" Display="TPS" LogReference="TPS" RequestID="2380870d" Eval="x*100/255" Unit="%" MetricEval="" MetricUnit="" ResponseBytes="1" GaugeMin="0" GaugeMax="100" ChartMin="0" ChartMax="100" ScalingFactor="1" Notes="" Priority="1" Visible="False" />
<DataListItem DataLog="Y" Color="" Display="Manifold Air Temp" LogReference="MAT" RequestID="2380867a" Eval="x-40" Unit="Deg F" MetricEval="x-40" MetricUnit="Deg C" ResponseBytes="2" GaugeMin="-10" GaugeMax="200" ChartMin="-10" ChartMax="200" ScalingFactor="1" Notes="" Priority="1" Visible="False" />
<DataListItem DataLog="Y" Color="" Display="ECT" LogReference="ECT" RequestID="23808653" Eval="x-40" Unit="Deg F" MetricEval="x-40" MetricUnit="Deg C" ResponseBytes="1" GaugeMin="-10" GaugeMax="130" ChartMin="-10" ChartMax="130" ScalingFactor="1" Notes="" Priority="1" Visible="False" />
<DataListItem DataLog="Y" Color="" Display="IAT" LogReference="IAT" RequestID="2380866d" Eval="x-40" Unit="Deg F" MetricEval="x-40" MetricUnit="Deg C" ResponseBytes="1" GaugeMin="-10" GaugeMax="130" ChartMin="-10" ChartMax="130" ScalingFactor="1" Notes="" Priority="1" Visible="False" />
<DataListItem DataLog="Y" Color="" Display="Speed" LogReference="Speed" RequestID="238087ff" Eval="x*2" Unit="kph" MetricEval="" MetricUnit="" ResponseBytes="1" GaugeMin="0" GaugeMax="250" ChartMin="0" ChartMax="260" ScalingFactor="1" Notes="" Priority="1" Visible="False" />
</Mode2>
</ecu>
Quote:
Originally Posted by Fourdoor
I downloaded the file, and when I try to open the zipped folder I get the following:
Compressed (zipped) Folders Error
The Compressed (zipped) Folder is invalid or corrupted.
I deleted the file and downloaded it again thinking it was a transfer error, but got the same error.
Keith
|
Last edited by SiC; Nov 5, 2009 at 02:28 PM.
|
|
Offline
|
|
|
|
|
Tags
|
26, 52360018, beta14, evo, evolution, evoscan, logging, manifold, mode23, mut, romid, sm5237, table, temperatures, xml  |
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
| | 
|
