H&R Anti-Roll Bar

[most wanted]

hey guy,

I recently bought a set of H&R Sway Bars/Anti-Roll Bars for my Evo 9 and seem to have run into some trouble with the back bar, the front fit with no problems but can't figure out how the rear bar fits with the stock brackets from the rear oem bar can someone please help me out.
(Kit Part Number: 33322)
Front Bar Diameter: 25 mm
Rear Bar Diameter: 27 mm

[heel2toe]

I have no experience with the H&R sway bars. What i do see if and will conclude is from the information you included. If the rear bar is 27mm then there is no way that it would fit into the factory mount. Did it come with the matching bushings? There should most likely be a supplied new mount given the large diameter of the bar.

[most wanted]

Originally Posted by heel2toe

I have no experience with the H&R sway bars. What i do see if and will conclude is from the information you included. If the rear bar is 27mm then there is no way that it would fit into the factory mount. Did it come with the matching bushings? There should most likely be a supplied new mount given the large diameter of the bar.

Yes it came with a bigger bushing to fit the bar, but no brackets

[most wanted]

most web site i have been to just showing pictures of the bar and bushing no brackets

[crichon]

I have ordered the same set in Germany :

http://www.duw.de/shop/DetailView.as...oductId=301913


and it came with new bracket for the rear :





can't tell you about the handling : they're still lying on the floor !

[most wanted]

So the question is what happened to my brackets then? And can i purchase these brackets separate

[crichon]

you should try the seller or the H&R customer service