95 mirage into a rhd,awd,full oem evo III swap

[tkrperformance]

[tkrperformance]

heater boxs are all in,gas door non key,cables for the gas door and trunk wires are in,all the front light's,a/c lines,heater core hoses,tails

[tkrperformance]

dash harness is in,foot rest is welded in,heater control is hooked up,rear heater tubes are in,levers for the gas and trunk are in

[tkrperformance]

evo body harness,evo carpet is in the seats are in for the final time,I put in the speedlab chip (no fuel cut,no speed cut,8500 rpm,18psi) now has a dsmchips chip till evo 1-3 dsmlink comes out soon

[tkrperformance]

here are the pics from jarco on the new clip and other parts

[tkrperformance]

more

[tkrperformance]

pics of the 5zigen stering wheel that came from japan the guy also sent me a real blitz horn button

[tkrperformance]

the front clip came to day
we were safer taking this one off. we had one of are accounts come up with ther flat bed and take it off the semi and drop in the shop.




this clip came with a snap-on key

got the hks short shifter in my car

the drive shaft just have to bolt it back together

[tkrperformance]

got some more done to the car and the clip
dash is in the electronic heater and a/c controler works

[tkrperformance]

got parts off the 2nd clip,also stared on the awd swap

[tkrperformance]

more of the mirage rear, gas tank is out I will be reusing it be hind the rear end,stock rear suspention is out.

[tkrperformance]

used the plasma cuter on the trunk floor it was all out in under 10mins

[lancer2show]

wasnt their a thread like this earlier? i swear its the same car.

[tkrperformance]

got the rear end in today the back hole was there for the awd subframe. I had to drill the front hole and make a frame to frame brace to the front of the punken.

[tkrperformance]

cut open the frame rail to put the bolts in and tacked them in so they will be solid and I hate trying to weld rust at least it just to hold them there