The End All Jdm Exhaust Fitment Thread!!!!!!!!!

[EvoKnievo]

so heres where to buy an absolutely beautiful exhaust that fits the jdm bumper with NO modifications!!!!!! absolutely gorgeous and ballin as all hell. but most importantly in stock as of 4/11/08

Originally Posted by Speed Element

I got 5 more TRUST Ti-R (80mm) exhaust systems in! holla!!

ok because the fitment thread has grown to over 30 some pages all goo'd up with one liners and meaningless banter. i am going to compile as much of it as i can in one sitting. this is a work in progress so check back often.



ALL DONE AS OF 2/21/2008 33 PAGES COMPILED TO ONE. (amazing how much space one-liners consume)

IF YOU CAN CONTRIBUTE TO THIS POST BY ADDING INFO THAT IS NOT ALREADY LISTED THAT'S GREAT.

PLEASE DON'T ASK FOR PICTURES OF THINGS THAT ARE NOT POSTED BECAUSE.... JUST BECAUSE DONT DO IT.


HERE IS THE BEST DIY / HOW TO INSTALL, PICTURES ON PAGE 5
How To: Evo Rear Bumper Removal And Evo Ix Rear Bumper Install
AND YES YOUR O2/DOWN-PIPE/CAT OR TEST PIPE WILL HAVE A SLIGHT AFFECT ON THE FINAL FITMENT. this is just to get a really good reference point for what works. what kinda works and what really doesn't.

THEESE FIT WITH NO MODIFICATIONS:

USDM MITSUBISHI

STOCK

Originally Posted by Skywarp

I just installed the JDM rear with my stock exhaust. It sticks out a little but not bad at all I'm working on a crashbeam that will fit this bumber. It will protect a little better than some I've seen here without being heavier than the original. I will post pics as soon as I finish.

Originally Posted by bluej20

OEM Stock exhaust on a IX bumper

AMS

Originally Posted by slicedbreadno2

Here you guys go. I had a few shots left over from this kodak disposable camera. This is my Brothers Evo with the JDM Evo IX Bumper, with the AMS full 3inch TBE with 4inch tip. Edit: I am no photographer.

Originally Posted by slicedbreadno2

We got the Version 2 exhaust that fits 05-06 evo's. From the sides it looks like it could possibly be shortened but we left it as is. I think it looks really good.

ARC definitely one of the most baller exhaust's hands down.








APEXI:

GT SPEC

Originally Posted by jdm_evo

here is my apexi gt spec... you be the judge. the only thing about US spec is that it sticks out.

N1

Originally Posted by boostdtalon

actually fits with no mod. rubs on the left side a bit.

AGENCY POWER

Originally Posted by Positron

i've seen it and it sticks out a lot.

BLITZ:

NUR SPEC

Originally Posted by Evasive EVO

I have it on my personal car... everything fits great. I'm actually going to be selling my Nur-Spec if anyone is interested.. want to go with something a little more quiet. Pictures soon! PM me if anyone is interested in buying the exhaust, thanks!

Ed @ Evasive

Originally Posted by edzilla

BURSHCUR:

SCCA

Originally Posted by MrFairlady

Confirmed:::

Burschur SCCA Magna fits like a Glove.installed mine today.
STicks out past the bumper a tad but def not over the top.

Originally Posted by BlackTrack

My Buschur Turbo back w/ bullet muffler fits peerfect, just need to be shortened an inch or 2.

-Ryan

Originally Posted by BlackTrack

Here is the Buschur Bullet, it needs to be shortened by 2-3 inches, I havent done it yet. Ive already posted some earlier, but here is some more...








-Ryan

ESPELIR

JGT500

Originally Posted by touchmyjagee

some people have been wondering, including myself, whether the espelir jgt500 exhaust fits the jdm rear. i installed my rear bumper today, and it sticks out a little more than i thought. here are some pictures:











the exhaust tip slightly touches the upper left part of the exhaust cutout. i think slight modification is needed.

hope these pictures help anyone who wanted to know the espelir with the jdm rear setup.

BEFORE AND AFTER PICS OF A ESPILER SOMETHING OR OTHER....

Originally Posted by O3EVO

Modified Espelir...













-AFTER

THIS FITS BUT LOOKS MUCH BETTER WITH THE TIP CUT. SAME EXHAUST AS ABOVE. JUST WITH A SHORTENED TIP.

Originally Posted by memo3

Buschur TBE w/ Magnaflow. Modified to fit it nicely

COBB

Originally Posted by silver9mr

go with the cobb exhaust its got 2 differnt tips to chose from either the us rear bumper and the jdm bumper and i heard the cobb down pipe it the easyest one out there to install thats what im going with in the spring when i get my jdm bumper

Originally Posted by silver9mr

looks like i got to it befor u did lol

TRUST THE MOST BALLER BEST FITTING NEXT TO ARC, OF COURSE.

Originally Posted by dog_dealer

here is mine

trust pe ti-r

GARAGE HRS BALLER STATUS AND PERFECT FITMENT

Originally Posted by DrivelineSales

Garage HRS Sports Ti Exhaust
... Only 11 lbs

GREDDY:

SP2

TI

Originally Posted by M5150

So does the Greddy TI.

Originally Posted by MGAUTOS

Greddy TI fits perfect
One system that doesn't clear the rear diffuser is the 3 1/2" APS system!

There is a few shots of the exhaust on this thread:-

My New IX GT...........

HER'S SOMEONE SAYING IT KINDA RUBS?? ROLLED TIP VERSION THOUGH...

Originally Posted by WhatNoise???

Here's my GReddy Ti. I've heard of a few people having issues with the bumper touching to the left of the exhaust cutout. Mine does the same thing. The diffuser just barely touches the very edge of the muffler canister. I'm an anal retentive bastard, but I've learned to let it go. I haven't trimmed it and I've been keeping my eye on it to make sure it doesn't melt. It's been fine so far. The bumper's been on since January…

Originally Posted by Lancer EVO IX

new setup greddy ti. i love the blue!

Originally Posted by TearItUpSports

Pic of Greddy Ti from my Car for Sale thread.

EVO2

Originally Posted by Advan EvO V

Greddy Evo2 ( i personally don't like fitment so I will be changing it)

TI-C

Originally Posted by Speed Element

The new Greddy Ti-C FTW!! Straight bolt on! no modification needed on the exhaust!

HKS

HI POWER SPEC-R TITANIUM (different than the normal high power i guess.)

Originally Posted by S1monLM

HKS HiPower Spec-R Titanium

Originally Posted by Boosted EVO 9

HKS Hi-Power Spec-R Titanium Exhaust. This is Jasma certified, sounds great.

FUJITSUBO:

Originally Posted by Rollaway

Fujitsubo fits perfect

Originally Posted by zstryder

Here's the Fujitsubo RM-01A, on my car.

Originally Posted by Kami Speed

All the Fujitsubo exhausts will extend out just right. We have the Legalis R, RM-01A, and Super Ti in stock. Thank you.

RSR

EX-MAG

Originally Posted by mynameizstitch

The RS-R Ex-Mag stuck out too much for my taste so I had it cut by an inch and a half. Now it sits flush with the bumper.

Originally Posted by J8dailo

RSR exmag fits with no rubbing with JDM ix bumper but it only sticks out maybe 4 inches

Originally Posted by EvoKnievo

RSR something i forget..... pictures before i cut the tip section and moved it back about 2 inches. but it clears with no issues prior to cutting the tip. it just sticks out like a sore thumb.






PICTURES AFTER THE TIP WAS CUT AND RE-WELDED, AS WELL AS A INCH BEING TAKEN OUT BEHIND THE MUFFLER

GT-2

Originally Posted by jdmEVOIX

the rsr gt2 sticks out and needs to be cut.

PRETTY SURE THIS HAS BEEN CUT A LIL BIT

Originally Posted by gixxerman11

Rsr Gt2

TANABE

ULTRA MEDALION

Originally Posted by ak47po

Tanabe Ultra medallion fits with no cutting.

MEDALION

Originally Posted by Robevo RS

i have a Tanabe Medalion Touring. Its a very quiet and unreal deep tone exhaust.
Fitment is perfect, quality is outstanding.Sorry for the crappy pictures.

TOURING MEDALLION

Originally Posted by scenic

Tanabe touring medallion with shortened tip.

CONCEPT G BLUE

Originally Posted by paracetamol

The Concept G Blue does not fit correctly: you be the judge:

BUT IT FITS!!!


VISNU:

signature series-

Originally Posted by I'mStock

Vishnu Signature Series.

It's the best ever.

I dont know about this for certain because i have a vishnu signature series on one of my evos and the muffler hits the bumper


POWER AMUSE

Complements to THRILLA!!!!





No cutting, rubbing, or trimming. Straight up bolt on.
Powerhouse Amuse Extra Titan

SUN AUTO/HRS

Originally Posted by Speed Element

Sun Auto/Garage HRS

TURBO XS:

Originally Posted by fsugatorbait

Best pic I have of the TurboXS TBE. It doesnt stick out far at all. Pretty happy with the fitment after a few adjustments.

HELIX:

Originally Posted by smokey

Full Helix TBE fits 100% perfect. This is my freinds Evo IX MR with the IX JDM bumper and his helix.

Originally Posted by rjsdxm

turbo xs fits

WORKS

Originally Posted by burningmoney97

works ab fits perfectly

Originally Posted by threepointsix

Works exhale fits perfect. I had tip re-welded/rotated to line up w/ bumper perfect for $30.00 to relieve the boner syndrome. Works stuff has factory flange locations so stock stuff is interchangeable.

On a side note, works now offers a jdm exhaust tip. Last i heard pete decided to start stocking them.

and here it is:

Originally Posted by Bernie Fincham

Works WRP Exhale

[EvoKnievo]

THEESE DO NOT FIT WITH OUT CUTTING AND/OR WELDING OF SOME SORT

THEESE DO NOT FIT WITHOUT MODIFICATIONS:


it is very simple to mod a usdm exhaust to fit a jdm bumper. it usually cost's between 10 & 50 dollars. If you have to ask for pictures on "how" or "where" to cut it, this is way to complicated for you. if you cant tell just by crawling under your car and looking, take it to a professional because odds are you cant weld. or SAFELY use a big saw to cut the tip (if applicable) this work can be handled by a decent muffler shop 99% of the time. UNLESS you have a FULL titanium exhaust or a very high grade SS and want it to be professionally TIG welded (not always available at your local muffler shop)

APEXI

GT SPEC-SOME SAY IT DOES NOT FIT:

Originally Posted by evolucion

here's mine with the GT SPEC exhaust and a little bit of bumper trimming. No cutting or welding was done to the exhaust. I love it how it sticks out.

Originally Posted by Lancer EVO IX

old setup (a'pexi gt spec) cut and rewelded to fit.

ESPELIR

Originally Posted by EvoSJ

i have the espelir and it pushes up the bumper i gotta do something about that

HKS:

CARBON TI

Originally Posted by damstr

HKS carbon Ti catback with AMS test pipe and downpipe.

The exhaust was modified to fit the JDM rear.

HI-POWER (rubs)

Originally Posted by eligh2

Here's my cut HKS Hi Power.

Originally Posted by snoop

Here is my car with HKS exhaust. I had to trim the bumper a little

D 1st Yellow03 EVO with JDM EVO9 front/rear bump!! (10 Pics)

Originally Posted by Derek888

Here is my HKS hi power exhaust...fits perfect and didnt have to modify exhaust or trim bumper. Before you trim your bumpers I would higly recommend modifying your exhaust first

Originally Posted by snoop

Here is what i did with HKS Hipower. I cut the bumper then went to muffler shop and have them cut and re-align the exhaust. You can't tell I cut the bumper unless you look under the car.

Here is what I would do if I did it again based on what I know.

1. Install the JDM rear bumper and look at the fitment to see where it touches
2. Remove rear bumper and put crash beam on and than drive to exhaust shop
3. Remove crash beam and then put on the rear bumper when exhaust has cooled down
4. Any good exhaust shop will cut and re-align the exhaust with anchors for $60-70 ( this should take less than 30min)

I would suggest this since some people with same exhaust may have different Downpipes and highflow cats so the exhaust alignment is still slighty different.
I saw this with two other people that had the HKS exhaust with JDM rearbumper.

HYPER MAX

Originally Posted by stockEVO_8

i jus got my evo9 rear and my HKS hipermax exhaust requires trimming!!!!

30TH ANNIVERSARY

Originally Posted by TURBevO8

Here is my contribution. HKS 30th Anniversary. Had to cut about 2" out of it and re-TIG it since it is 100% SS unlike the Hi-Power that can just be re-MIG'ed.

JIC

Originally Posted by TwinBeat-Evo6

I have a JIC Magic Spartan DE Ti on my 9er (cat-back).
We had to make some minor modifications (clip away 3cm from the pipe just before the muffler) to make it perfect. Have cost us about 20 minutes of work.

Originally Posted by onesicklambo

JIC MAGIC catback. trimmed 1/4inch off the corner of the fin..fits perfect.

JUN

BL

Originally Posted by mracing5625

jun bl will not... you will have to cut and weld! thats what i did to mine! but still love it!

INVIDIA


N-1

THIS DOESNT LOOK TO HAWT

Originally Posted by boostdtalon

here mine with the apexi N1 i finally installed.

Originally Posted by Marteinn

i have evo 9 euro bumper on my evo, and i had to move the silencer 2" back.

pics later next week

Originally Posted by Marteinn

sorry car is looking like **** :/ ...stiilll working on it

i´m going to lower it a little also, dont want to burn my new rear ;p

Originally Posted by wesside

I shortend my invidia N1 about 2"
sorry all I have now is a siggy picture after I shortned it, I'll have to take a new picture

AFTER BEING MODDED

Originally Posted by Lil red '03

Pics as promised......

Invidia N1 TBE on my GG evo 9. Hope you can see it well enough.

MEGAN

Originally Posted by rr06rs

megan does not fit without modifying

Originally Posted by Speed Element

megan does not fit very well ... needs minor modifications

MAGNAFLOW

Originally Posted by R3dline

I have the Dc downpipe with a Magnaflow ti catback and it doesnt clear, it pushes the diffuser out, heres a bad pic I took. I will be going to a muffler shop this weekend to have them fix and move my exhaust more to the side.

Originally Posted by DublXL

I installed my JDM Evo IX couple of weeks ago and fitment was pretty damn good for the most part with the exception of rubbing of my Magna Flow Ti. I took it to an exhaust shop to adjust my hangers and it's perfect. Next is adjusting the license plate bracket. Lovin'it!!!!

PERRIN

Originally Posted by MREvo2k6

Perrin exhaust does not fit without fabrication. I took off 2 1/2" right behind the muffler and it fits and looks great will post some good pics tomorrow

Originally Posted by BlackSport350

The Vishnu Standard exhaust ( perrin ) fits perfectly after being shortened and having the hanger bracket moved. It actually looks far better with the JDM bumper then with the USDM one....go figure!

Originally Posted by Positron

had the Perrin catback with jdm rear before. Yes it needed to be cut at least 3 inches in order for the muffler tip to be flush with the jdm rear bumper fins. Costs $50 at a local muffler shop.

THERMAL

Originally Posted by Vapor

Thermal catback, sticks out too much

RNR

Originally Posted by M3this

Fitment on the RNR with the JDM IX bumper is a 7 out of 10 ... I had to trim the exhaust opening a little bit but over all it worked out good. I'll take some pics tomorrow after I get off work and post them up.

[EvoKnievo]

AND A GREAT VENDOR WITH A GREAT PRODUCT!!!!!!

Originally Posted by Rexpeed

I have CF heatshields if anyone is interested.
here is my custom 3inch exhaust

(feel free to send me one for the plug! talk about a captive audience! j/k)

[DRAGHICI]

. .

[EvoKnievo]

my personal, UN-BIASED RECOMMENDATION on where to buy a jdm rear or a exhaust that is in list of confirmed fitments.

DRIVELINE MOTORING ---- ask for erik ( # (818) 886-DRIV )

GRUPPE S / DYNAMIC AUTO SPORT ( or whatever there name is these days)

INVISION


all great vendors, with the best pricing hands down. period.

[EvoKnievo]

Originally Posted by draghici

. .

Ahhhhhhhh You Just Had To Go And Do That!!!!!!!!!! Why Why Why!!!! It Was Almost Perfect!!!!!

[EvoKnievo]

WOOO HOOOOO its all done! Flame away!

it's now time to ask for pictures of exhaust's i just posted. and or post your opinions and comments on them (because it really matters and we all really care)

[Sofa King Fresh]

omgomgomgomg the trust ti-r catback is friggin BALLER

[myev0sneezes]

Thank you very much my good sir.

[Boost3dxEvO]

thank you (:

[EvoKnievo]

you are very welcome! i just hope it helps!

my first sticky! i guess it was worth the time.

[Vapor]

glad i was able to contribute, even though i have the least popular exhaust for Evo's lol

[chaotichoax]

Originally Posted by EvoKnievo

you are very welcome! i just hope it helps!

my first sticky! i guess it was worth the time.

it's a solid wealth of info and clearly you took your time so I deem it worthy

will save a lot of people time trying to search for jdm ix rear/exhaust answers

[BocaShula]

you have a lot of time on your hands...lol nice job bro

[EvoKnievo]

Originally Posted by BocaShula

you have a lot of time on your hands...lol nice job bro

understatement of the year!