SBR Internals Galore!!! Manley / BC / Cosworth / Kelford / SRP / GSC / TIMING KITS!!!

[SBR INC]

Slowboy Racing is your real engine internal mega store! We built tons of 4G63's every month and that allows us to offer you the very best at the best prices! We're not one of those online stores that sells parts that we have never seen! We're a machine shop, we stock and use these products everyday!

I'll be posting all kinds of great internals promos that I think you will all find very appealing! We can supply you with every single part needed for a great engine build. Remember, we are a machine shop so we can also build you anything you could ever need!

Let's kick it off in a Manley way!!!!

Check out the products I'm putting on sale today!!!



Rods:

H BEAM - YEAH, I gots dat!
H Beam+ - YEAH, I gots dat!
I BEAM - YEAH, I gots dat!


Forged Pistons for your 2.0, 2.3 and 2.4! Yeah, I gots dat!

I can pair up the rods and pistons and include bearings for A STEAL!

We've got these for all EVO's, including the X!

Want a complete MANLEY Rotating assembly? Yeah, I GOTS DAT!


We've got some great options on all of our stroker kits! We are even taking orders now for the kits with Manley's 100mm Forged and Billet Crankshafts!!!

Check our my all Manley Rotating Assembly!
-Manley Forged Crankshaft
-Manley H Beam Rods
-Manley Forged Stroker Piston
-ACL Main Bearings
-ACL Rod Bearings
-ACL Thrust Washer
$1469 SHIPPED!

I've got valve train parts galore too!


Valve Spring and Retainer kits to meet any need!!!


Valves to help with some serious flow!!!

THE SHIRTS HAVE MOTIVATED BIG DISCOUNTS!!!! DON'T MISS OUT.

[SBR INC]

Killer, Killer Deal for EVOM! Check out the new Rotating Combo I have on sale while supplies last!!!


JE SRP Pro Pistons (Forged Kit w/ Rings, Pins and Lock
Manley H Beam Rods
ACL Thrust Washers
ACL Main Bearings
ACL Rods Bearings
Shipped........ Ready????
$839.00!

Please understand that this price is ONLY While supplies last!!!! Message me with any questions that you may have. I want to do what I can to earn your business! Don't miss out on these killer deals!

[SBR INC]

Brian Crower offers one of the most complete engine product lines on the market! We use their products in some of our own engine builds and sell a lot of the product all over the world!

Check out the great parts we have from Brian Crower for your EVO!



EVO VIII and IX Cams

BC Cams are available in a 272, 280 and 288 duration! That means that we have the BC cams to meet just about any performance need!

Valve Spring and Retainer Kit

By far one of the best values in the business. The Brian Crower spring and retainer kit offers excellent quality and performance at a great value! Match these up with some cams and you have a pretty nice valve train going!

Performance Valves

Brian Crower Valves are made from premium stainless steel, fully machined and swirl polished for ultimate air flow. Dished head for added weight savings and increased valve control at high rpm. Standard and oversize head sizes available!

Stroker Kits!

The BC stroker kit for the Mitsubishi 4G63 engine platform incorporates a 102mm stroke, 7 bolt crank. Depending on bore size that you decide, the BC kit will take you up to a 2.4L with 86mm bore. The 4G63 kit utilizes premium steel billet connecting rods. As usual, each BC kit features custom CP pistons, highest quality, steel alloy wrist pins, full ring pack and buttons. Econo rods are rated up to 600 maximum horsepower, Pro Series rods rated to 800+ horsepower.

Needless to say, if Brian Crower makes it, we have it available for you! REMEMBER, WE WON'T BE UNDERSOLD!!!!

[SBR INC]

Cosworth offers one of the highest quality lines on the market! Their products are really designed for the most demanding builder. As a proud distributor, we offer their entire product line and have some very good hands on experience with the products. We highly recommend their products and hope you'll take the time to check out what we have to offer from Cosworth USA!

Forged Pistons

• Unique forgings for each application
• Xylan Anti scuff skirt coating
• Polished tops (reduced carbon build up and stress relief)
• Manufactured from proprietary alloy (CosAl 010)
• Ultra strong pin
• Patented anti-detonation bands
• Bore size = 85mm or 86mm
  
• Compression ratio 8.8:1 (nominal)
  
• Rings not included (use part number PR7317)

Forged Rods

• Strong, light weight H-beam design
• Heavy duty rod bolt (260,000psi)
• Manufactured from 4340 (EN24) steel
• Small end bushed for floating pin

Rod and Main Bearings

• High strength overlay plate with reduced thickness for better oil control and less friction
• Hardened steel backing on all connecting rod bearings
• Increased crush and elimination of flash plating
• 3/4 grooving on Main Bearings providing optimum oil supply
• Tight consistent wall tolerances
• Oversize chamfers where applicable
• Flash plating eliminated for improved heat transfer
• Tested to over 1000 horsepower!

Ultra Hi Performance Head Stud Kit

• Essential for high power applications
• Superior strength compared to other brands
• High clamping force helps to seal block to cylinder head joint
• Hex broach ends ease installation
• Roll Die formed threads
• 260ksi+ (260,000psi+) tensile strength
• Special heat treat process includes heating in vacuum sealed furnace and quenched in a nitrogen chamber for precision control

Stroker Kits

• Cosworth Forged Pistons (86mm)
• Cosworth Fully Counterweighted Billet Crankshaft (94mm)
• Cosworth Forged Connecting Rods
• Cosworth Rod Bearings
• Cosworth Main Bearings
• Cosworth Piston Rings

Head Gaskets

• Individual die cut layers of stainless steel with superior consistency compared to lasercut gaskets
• Pre-coated stainless steel with a 0.25 micron layer of nitrile rubber ensures consistent distribution of coating with no high or low areas
• Manufacturing dimensional tolerance of +/- 0.001
• Die cut manufacturing process ensures smooth edges, unlike laser cut gaskets
• Cosworth gaskets feature a folded stopper layer for additional sealing pressure around each cylinder. The width of sealing area is specific for each application thereby providing ultimate sealing properties
• Available in a range of thicknesses for specific applications
• Bore = 86mm, Thickness = 1.3mm

CAMS CAMS CAMS

M1 Grind

• Intake duration "264" deg
• Intake lift 10.2mm
• Exhaust duration "264" deg
• Exhaust lift 10.2mm
• Excellent torque and boost response
• Broad power band
• Valve spring upgrade recommended when factory rpm limiter is raised (Cosworth part number 20000164)

M2 Grind

• Intake duration "272" deg

• Intake lift 11mm
• Exhaust duration "272" deg
• Exhaust lift 11mm
• Excellent torque and boost response
• Broad power band
• Valve spring upgrade recommended when factory rpm limiter is raised (Cosworth part number 20000164)

Valve Spring and Retainer Kit

Free L1 F1 F1 L2 F2 F2 Max Coil height mm N lbs. mm N lbs. Lift Bind 50.00 38.1 512 115 26.9 1268 285 12.0 25.7Cosworth Ultra Race Valve Spring Kits are engineered for use in situations that require valve control in extreme conditions. Each kit consists of dual valve springs with matched lightweight titanium retainers, keepers, and hardened steel springs seats.

CNC Ported Big Valve Cylinder Heads

• CNC Ported/Machined finish port- New Castings
• Hand blended finish work
• Intake 20% (max) increased flow
• Exhaust 22% (max) increased flow
• 4-angle Inlet Valve job
• 3-angle & radius Exhaust Valve job
• Valves are lapped
• Back-Cut Inlet Valves
• Heads are Ultra Sonic cleaned prior to assembly
• Heads are Serialized and sport a machined Cosworth logo
• +1mm Stainless Steel Intake Valves (1800 degrees max.)
• +1mm Inconel Exhaust Valves (2400 degrees max.)
• Performance Valve Springs
• Titanium Retainers
• Hardened Steel Spring Platforms
• Knife edged port divider

All of this and more available from Cosworth USA at Slowboy Racing!!!!

REMEMBER, WE WON'T BE UNDERSOLD!

[CosworthUSA]

Cosworth is now on EvolutionM.net to support our dealers (ie: Slowboy Racing) and the retail customers. Please feel free to contact us on any product or technical questions you may have.

Thank you

[SBR INC]

I have a question. I would like to know how you guys make Cosworth products so awesome? lol

[SBR INC]

The Manley crankshafts have been a long time in the making and we've been super excited to get them since we kicked off the project to begin with and it has finally come full circle!

Slowboy Racing now has Forged and BILLET Mitsu Crankshafts!!!!

88mm, 94mm and 100mm!!!!

Forged Awesome:


With each one ordered from Slowboy Racing through the month of October, I will throw in the balancing on our built Hines Balancer! Bundle a rotating assembly to save BIG TIME!

• Premium Heat Treated Forgings
• Special Teardrop, diagonal oiling features not found in OEM Cranks
• Better Performance at High RPM
• Stress Relieved & Shot Peened
• Nitrided
• Magnafluxed

BILLET MEGA COOL AWESOMENESS


Beautiful billet design, ideal for you HUGE power build!

• Billet 4340 Contruction
• Stress Relieved & Shot Peened
• Nitrided
• Magnafluxed
• Knife Edged Counterweights

[SBR INC]

Rotating Assemblies and Stroker Kits ready to go!!!!!

[SBR INC]

tomorrow will be the last day on most of these deals folks! Take advantage of the savings while they are offered. If there is something that you're looking for that isn't on this list, please let us know and we'll do anything we can to earn your business.