Buschur Racing Shortblocks.. New Lineup!!! 2.1L Race Engine Now Available!!!

[Mike@AwdMotorsports]

Alright guys.. We are proud to annouce the release of the new Buschur Racing 2.1L race Motor to the already stout arsenal.. We have been testing this motor and have great results.. Currently, the Buschur Racing Badbish is running this motor.. At the 09' Shootout the car ran 9.1 @ 150+ on multiple passes without an issue.. Some of the benefits of the the 2.1L are..

Better Rod Stroke Ratio for safer High Rpm use..

Lesser Expensive 4g64 Core.. No core required.. We have cores on Hand ALWAYS..

Ability to run a wet block for big boost applications..


We are offering the Buschur 2.1L motor currently with the following setup..

Buschur Spec Je Pistons @ 9.5 or 10:1 Compression..

Manley Turbo Tuff Rods or GRP Aluminum Rods..

ARP Rod Bolts , Bearings, Fully Blueprinted and Balanced.

Block pricing for the 2.1L is 4000.00 + Shipping.. NO BLOCK CORE REQUIRED ( if you have 4g63 cores Discounts will be given ).. These motors will be on the shelf ready to ship.. No block core required.. if you have a good 4g63 crank we will need that for the build.. If You do not provide a 4g63 Crank a core charge will be applied..


Buschur Racing 2.0L & 2.3L Pricing and Options!!!



Option #1
BR Spec J&E Tough Skirt Coated Forged Pistons, Crower Rods, ARP Rod Bolts, Bearings, Fully Blueprinted and Balanced. 3100.00 + Core + Shipping


Option#2
BR Spec J&E Tough Skirt Coated Forged Pistons, GRP Aluminum Rods, Bearings, O-ringed, Fully Blueprinted and Balanced. 3250.00 + Core + Shipping

^^^ THIS IS WHAT WE USE IN OUR PERSONAL CAR AND RUN 8's With!!!! ^^^

Option#3
The Buschur 2.3L Motor kit includes Stroker Crank, BR Spec J&E Tough Skirt Coated Forged Pistons, Crower Rods, ARP Rod Bolts, Bearings, Fully Blueprinted and Balanced. Priced at 3600.00+ Shipping with your good core. This is an EXCELLENT option for a street car!!!





Buschur Stage 3 Head 1750.00 Shipped + Core

We are now offering our EVO 8 & 9 Stage 3 Cylinder Head.

This assembly includes:
- Custom BR Bronze valve guides
- Custom BR dual stainless steel valve springs
- BR titanium retainers
- BR stainless intake valves
- BR stainless exhaust valves
- Stainless Oring around each combustion chamber
- Complete port & polish job

[Mike@AwdMotorsports]

ttt

[Mike@AwdMotorsports]

ttt

[Mike@AwdMotorsports]

Monday Bump..

[David24]

How much is shipping to Colorado and do you accept cores later? Which option would you recommend for a street driven BBK turbo? Thanks!

[Mike@AwdMotorsports]

Originally Posted by David24

How much is shipping to Colorado and do you accept cores later? Which option would you recommend for a street driven BBK turbo? Thanks!

Right now we are not offereing core exchange on the Blocks.. We have them already in stock.. We can offer the core refund for a crank if your crank thats returned shows up in good condition..

As far as recommendation i would need to know more or less what the plans are for the car.. is the BBK the last turbo you plan to use or will it be used with a t3 turbo later?? drag use, autocross etc??

Mike

[David24]

So I'd only send you the crank for a core refund, nothing else?

My car will only be street w/occasional drag strip and I do plan on sticking with the BBK but if I were to upgrade, the most I'd do is a RED. So really I'm sticking with stock frame turbos.

[Mike@AwdMotorsports]

Originally Posted by David24

So I'd only send you the crank for a core refund, nothing else?

My car will only be street w/occasional drag strip and I do plan on sticking with the BBK but if I were to upgrade, the most I'd do is a RED. So really I'm sticking with stock frame turbos.

The 2.1L would work well.. All we would need is a crank core.. Blocks are already covered.. Thanks!!

Mike

[David24]

How much is shipping?

[Mike@AwdMotorsports]

Originally Posted by David24

How much is shipping?

125.00 to CO..

Mike

[Mike@AwdMotorsports]

8 and 9 heads available.,.

[Mike@AwdMotorsports]

ttt

[Mike@AwdMotorsports]

2.1L blocks and BR Heads on Deck ready to go!!!

[David24]

Originally Posted by Mike@AwdMotorsports

125.00 to CO..

Mike

I'm leaning toward the 2.3 stroker, do you have one in stock? Does the crank only core apply to these too? How much is the core on the head? Thanks!!!

[Mike@AwdMotorsports]

Originally Posted by David24

I'm leaning toward the 2.3 stroker, do you have one in stock? Does the crank only core apply to these too? How much is the core on the head? Thanks!!!

We dont have the 2.3L stroker in stock.. We have cores that can be assembled quickly at BR..

No we need a good block for the 2.3L as a core.. If you supply a good 4g63 crank we can use it as a core for the 100mm crank..

Head core is 1000.00..

Mike