Buschur Racing Shortblocks.. New Lineup!!! 2.1L Race Engine Now Available!!!

[Mike@AwdMotorsports]

Plenty of options available..

[Mike@AwdMotorsports]

Bump

[Mike@AwdMotorsports]

Ttt

[Mike@AwdMotorsports]

Weekend Bump.. Any questions Just ask!!

[Mike@AwdMotorsports]

ttt

[Evo8Master]

Originally Posted by Mike@AwdMotorsports

Alright guys.. We are proud to annouce the release of the new Buschur Racing 2.1L race Motor to the already stout arsenal.. We have been testing this motor and have great results.. Currently, the Buschur Racing Badbish is running this motor.. At the 09' Shootout the car ran 9.1 @ 150+ on multiple passes without an issue.. Some of the benefits of the the 2.1L are..

Better Rod Stroke Ratio for safer High Rpm use..

Lesser Expensive 4g64 Core.. No core required.. We have cores on Hand ALWAYS..

Ability to run a wet block for big boost applications..


We are offering the Buschur 2.1L motor currently with the following setup..

Buschur Spec Je Pistons @ 9.5 or 10:1 Compression..

Manley Turbo Tuff Rods or GRP Aluminum Rods..

ARP Rod Bolts , Bearings, Fully Blueprinted and Balanced.

Block pricing for the 2.1L is 4000.00 + Shipping.. NO CORE REQUIRED ( if you have 4g63 cores Discounts will be given ).. These motors will be on the shelf ready to ship.. No block core required.. if you have a good 4g63 crank we will accept them for a core credit..


Buschur Racing 2.0L & 2.3L Pricing and Options!!!



Option #1
BR Spec J&E Tough Skirt Coated Forged Pistons, Crower Rods, ARP Rod Bolts, Bearings, Fully Blueprinted and Balanced. 3100.00 + Core + Shipping


Option#2
BR Spec J&E Tough Skirt Coated Forged Pistons, GRP Aluminum Rods, Bearings, O-ringed, Fully Blueprinted and Balanced. 3250.00 + Core + Shipping

^^^ THIS IS WHAT WE USE IN OUR PERSONAL CAR AND RUN 8's With!!!! ^^^

Option#3
The Buschur 2.3L Motor kit includes Stroker Crank, BR Spec J&E Tough Skirt Coated Forged Pistons, Crower Rods, ARP Rod Bolts, Bearings, Fully Blueprinted and Balanced. Priced at 3600.00+ Shipping with your good core. This is an EXCELLENT option for a street car!!!





Buschur Stage 3 Head 1750.00 Shipped + Core

We are now offering our EVO 8 & 9 Stage 3 Cylinder Head.

This assembly includes:
- Custom BR Bronze valve guides
- Custom BR dual stainless steel valve springs
- BR titanium retainers
- BR stainless intake valves
- BR stainless exhaust valves
- Stainless Oring around each combustion chamber
- Complete port & polish job

How much is your core charge and shipping to 92129???

[Mike@AwdMotorsports]

Pm me on what you need.. I dont know which core your speaking of.. I can get you squared away thru pm.. Thanks!!

Mike

[Mike@AwdMotorsports]

Bump

[Mike@AwdMotorsports]

ttt

[Mike@AwdMotorsports]

ttt

[Mike@AwdMotorsports]

ttt

[Mike@AwdMotorsports]

ttt

[evowizzler]

Mike,
i have a slowboy racing built long block 2.3 stroker with 9.0CR and a 1mm over size ported head. I am not impressed with the port so i would like to switch out to a BR stage 3 head. I am also running a twin scroll ETS HTA3586R. If i am to switch the head what turbo setup do recomend to go to? My car is a street/drag strip use.

[03EVOGUY]

mike, what turbo would you recommend for the 2.1 built block with the stage 3 buschur head and supporting mods? going for a street/strip use...thanks

[Mike@AwdMotorsports]

Originally Posted by evowizzler

Mike,
i have a slowboy racing built long block 2.3 stroker with 9.0CR and a 1mm over size ported head. I am not impressed with the port so i would like to switch out to a BR stage 3 head. I am also running a twin scroll ETS HTA3586R. If i am to switch the head what turbo setup do recomend to go to? My car is a street/drag strip use.

I have those heads in stock.. The HTA 3586 if you have it is a good turbo.. Unless you want 800+.. Then i have some suggestions..

Mike