Evo How Tos / InstallationsPost or link to your detailed how to / installation articles in here. If you have any questions regarding the how tos, feel free to post them in the Request sub-forum.
Welcome to EvolutionM.net!
Welcome to EvolutionM.net.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Anyone installed the hella supertones on the 8/9's? I know on NASIOC there were a few guides w/ pics... seeing if someone had something similar here in the evo community. Going to throw 2 on my 9, but looking for the best mounting location(s).
Hella Supertones have two wires, positive and negative. Positive goes into the FACTORY HARNESS and negative runs to ground .
As far as install location, I used the mounting bolt for the FMIC and the OE location for the second horn underneath the driver's side headlamp.
Thanks. I was looking more along the lines of pictures... they're always nice... However you did leave out the detail of 2 horns & wiring the harness (unless with the factory harness you can throw in 2)?
Last edited by deviantek; Apr 23, 2010 at 10:15 PM.
Drives: '08 CBR 600RR "Graffiti"/'99 Maroon GSX/SOLD: RR IX RS
Here you are:
NO need for relay, just the Horns and (4) wires you make - (2) for Positive leads, (2) for Negative leads. I recommend soldering the positive leads to the OEM harness wires -hope this makes sense. I have attached four pics, one quick diagram and three of mine installed.
sorry for bring up an old thread but is there any way to install both horns in the grill in the middle like how the subies do it? i know the radiator fan is on the passanger side so not sure how itll work. anyone tried this or knows how to do it?