DIY: Red Out Tails (EVO VII STYLE)
#247
Evolving Member
Bump.
Used the Krylon Stained Glass paint, the 1/4" tape, and bought some urethane clear coat.
3 coats color, 4 coats clear, wet sand with 600, 800, 1000, 1500, 2000, and 2500 grit, buffed. The finish is nice. I also swapped the turn-signal and reverse light bulbs in their locations, so that my reverse lights stay white.
Used the Krylon Stained Glass paint, the 1/4" tape, and bought some urethane clear coat.
3 coats color, 4 coats clear, wet sand with 600, 800, 1000, 1500, 2000, and 2500 grit, buffed. The finish is nice. I also swapped the turn-signal and reverse light bulbs in their locations, so that my reverse lights stay white.
#248
Newbie
iTrader: (4)
Bump.
Used the Krylon Stained Glass paint, the 1/4" tape, and bought some urethane clear coat.
3 coats color, 4 coats clear, wet sand with 600, 800, 1000, 1500, 2000, and 2500 grit, buffed. The finish is nice. I also swapped the turn-signal and reverse light bulbs in their locations, so that my reverse lights stay white.
Used the Krylon Stained Glass paint, the 1/4" tape, and bought some urethane clear coat.
3 coats color, 4 coats clear, wet sand with 600, 800, 1000, 1500, 2000, and 2500 grit, buffed. The finish is nice. I also swapped the turn-signal and reverse light bulbs in their locations, so that my reverse lights stay white.
#251
#254
Thread
Thread Starter
Forum
Replies
Last Post
Heliart
09+ Ralliart How-To/Installations
15
Oct 2, 2023 02:33 AM
TomekEVO
Evo Show / Shine
3
Nov 29, 2017 12:13 PM
Liqquid
Evo Engine / Turbo / Drivetrain
80
Mar 29, 2017 09:32 PM
dmwicked
Evo X Show / Shine
22
Feb 17, 2016 06:02 AM