Mechanical o2 Fix - Page 8

EVO8emUp · Nov 1, 2007, 02:54 PM

1. You will pass inspection.
2. You don't need 2 anti-foulers. If you drill the hole to 17/32, the space between the tip of the sensor and wall of the anti-fouler is so close that the fumes cant get to the element.
The hardest part is centering the hole perfectly so the sensor screws in.

I have a few of these already machined if someone is looking for one..

blankito350 · May 19, 2008, 04:41 PM

i think i have to put 3 adapters because mine still "service engine soon" light on... and right now have two adapters..!! i need some help.. my RALLIART have INJEN, DOWNPIPE(custom), RRM PULLEY.... i have these codes on the scanner: "system too lean", and something about o2 sensor.... PLEASE!!! my car after installing the aftermarkets run worst than STOCK!!!! (dyno)

Stock: 149hp and 154tq

downpipe, injen, pulley: 150hp and 144tq

Krazyloc · Jul 10, 2008, 08:02 PM

o2 fix works great got my car in 2007 i put Road///Race Race Series Header/Downpipe, ROAD///RACE Ralliart Underdrive Pulley Kit, ROAD/RACE - Magnaflow Highflow Cat, ROAD/RACE MIVEC Engine Ported/Polished Intake Manifold, ROAD/RACE Piggy Back ECU Automatic Version 2 and cai all of this stuff run good

Canada_Comp · Jul 11, 2008, 01:44 PM

Works for me, I used both antifoulers, put 600 km on and no CEL. Did not have problems with clearance since the angle of the sensor was parallel to the ground.

for custom mandrel bent exhaust system =)

Krazyloc · Jul 13, 2008, 07:24 AM

2 didn't work for me i had to use 3 42002

Krazyloc · Jul 14, 2008, 03:31 PM

so far so good i did 80 miles no cel or ses using 3 anti fouler #42002

damstr · Jul 14, 2008, 03:56 PM

I found that I had to reset my car a couple times before the CEL never came back. 15k later and no CEL.

Krazyloc · Jul 16, 2008, 05:34 PM

i am using 3 anti fouler #42002 i did a 114 miles no cel yet

6one9EVO · Sep 10, 2008, 12:37 PM

can someone post up some pics on how to do this?

Spish · Sep 24, 2008, 03:51 PM

I'm installing mine tomorrow and will post up some pics, its on a IX so I might have some clearance issues.

DJJimGreen · Mar 1, 2009, 07:37 PM

were pics ever taken for this install?

19DB794 · Mar 1, 2009, 07:44 PM

I got a o2 simulator from Ebay and I've had it in for 5-600 miles and no CEL yet.

krisdlm · Mar 29, 2009, 11:56 PM

http://www.streettunedmotorsports.co...engine_fix.htm

just ordered this w/ a test pipe last wk. Hope it works!

PlanoEvo · Oct 4, 2009, 11:32 AM

Quote:

Originally Posted by bigfishs

Apparently you can get one of these brass fittings from hardware stores, for cases in which your antifoulers make the o2 hit the body.

Fix provided by whtevo

I asked him where he got the fitting and he cant remember. If I get one, I will post it.

see bottom of page24 of

Megan buy back on... turbo back; turbo back including turbo manifold and O2 housing

Anyone know what the 90 brass fitting is and where it can be found?