 |
Jun 22, 2009, 08:38 PM
|
#1
|
|
Newbie
Personal Sales Rating: ( 4)
Join Date: May 2009
Location: denver
Posts: 55
Drives: 2006 evo mr
|
Help!!! TBE
So I have a tanbe tbe and it came in 4 peaces with 4 gaskets. All of the gaskets fit perfect except the one from the exhaust manifold to the down pipe. The gasket is to small. Do I need this gasket? the stock one didnt have it but I dont know what to do. thanks for any help. I have a 06 evo MR
|
|
Offline
|
|
|
Jun 22, 2009, 08:43 PM
|
#2
|
|
Evolving Member
Personal Sales Rating: ( 14)
Join Date: Sep 2008
Location: FL
Posts: 131
Drives: Evo IX GSR, 06 RSX Type S
|
You may need to just reuse the stock donut
|
|
Offline
|
|
|
Jun 22, 2009, 09:51 PM
|
#3
|
|
Newbie
Personal Sales Rating: ( 3)
Join Date: Feb 2009
Location: Sac
Posts: 89
Drives: EVO IX MR
|
Yea reuse the stock donut or buy a new stock donut. Apply some red atv on it while you're at it.
__________________
IX MR - Megan DP l Megan RTP l WORKS 3" IP l StealthWORKS Muffler l Vibrant Intake l LICP l MAP Crankcase Vents l Speed Source Cable Bushings l Blox Roll Stopper l WORKS P2 Brainflash
|
|
Offline
|
|
|
Jun 22, 2009, 09:56 PM
|
#4
|
|
Newbie
Personal Sales Rating: ( 4)
Join Date: May 2009
Location: denver
Posts: 55
Drives: 2006 evo mr
|
You mean cut off it and re weld? I didnt see a donut on the stock exhaust. Also I took pictures of all the parts and if you could please help that would be great. Also I dont know what side the gasket faces? the test pipe to the mid pipe are both flat and the mid pipe to the canister are both round. SEE PICTURES. This shouldnt be this hard I have done exhausts before and never  me before thanks guys. so the down pipe gasket doesnt fit took a pic of that and the test pipe and mid pipe where they connect both are flat and the can and the midpipe on the other side are round. I know I dont have it backwards because the o2 sensor wont reach if I do flip it
|
|
Offline
|
|
|
Jun 22, 2009, 10:20 PM
|
#5
|
|
Newbie
Personal Sales Rating: ( 4)
Join Date: May 2009
Location: denver
Posts: 55
Drives: 2006 evo mr
|
|
|
Offline
|
|
|
Jun 22, 2009, 10:30 PM
|
#6
|
|
Newbie
Personal Sales Rating: ( 3)
Join Date: Feb 2009
Location: Sac
Posts: 89
Drives: EVO IX MR
|
That first picture looks like the downpipe. Most likely the donut gasket is still on the 02 housing. It may seem like its part of the 02 housing but it's just really on there. Use the gasket flanges for everything else.
__________________
IX MR - Megan DP l Megan RTP l WORKS 3" IP l StealthWORKS Muffler l Vibrant Intake l LICP l MAP Crankcase Vents l Speed Source Cable Bushings l Blox Roll Stopper l WORKS P2 Brainflash
|
|
Offline
|
|
|
Jun 23, 2009, 12:11 AM
|
#7
|
|
Newbie
Personal Sales Rating: ( 4)
Join Date: May 2009
Location: denver
Posts: 55
Drives: 2006 evo mr
|
need help good night bump
|
|
Offline
|
|
|
Jun 23, 2009, 08:29 AM
|
#8
|
|
Newbie
Personal Sales Rating: ( 4)
Join Date: May 2009
Location: denver
Posts: 55
Drives: 2006 evo mr
|
|
|
Offline
|
|
|
Jun 23, 2009, 09:36 AM
|
#9
|
|
Evolving Member
Personal Sales Rating: ( 1)
Join Date: Oct 2005
Location: NYC Area
Posts: 144
Drives: 05 Evolution
|
Yup that is what you need...!
__________________
Injen intake w/ upper intercooler pipe -
Nisei Intercooler - BR Slip fit exhaust -
Megan downpipe - Lineage Grounding Kit -
GT Spec Exhaust Mani - ACT Street Kit w/ Pro-Lite -
Helix Test Pipe - PPI LICP - Tomei 264 Cams -
Megan 02 - 255 LPH Fuel Pump - Peteyturbo Tuned
FS: Electric Blue USDM Rear Bumper Excellent Condition!!! - Local Pickup preferred or willing to meet in Tri-State Area
FP Red Turbo hopefully by 2010
|
|
Offline
|
|
|
Jun 23, 2009, 10:09 AM
|
#10
|
|
Evolved Member
Personal Sales Rating: ( 4)
Join Date: Feb 2006
Location: Memphis, TN
Posts: 733
Drives: 03 EVO GSR, while the kids scream go super speed daddy.
|
I had a Tanabe Concept G Blue and just reused the stock donut.
__________________
Car is sold.
Will have another one soon.
|
|
Offline
|
|
|
Jun 23, 2009, 04:21 PM
|
#11
|
|
Newbie
Personal Sales Rating: ( 4)
Join Date: May 2009
Location: denver
Posts: 55
Drives: 2006 evo mr
|
Quote:
Originally Posted by newbieEVO8
I had a Tanabe Concept G Blue and just reused the stock donut.
|
so the mid pipe and the canister the pipes are both round and why do they send 4 of those gaskets?
|
|
Offline
|
|
|
Jun 23, 2009, 05:25 PM
|
#12
|
|
Evolved Member
Personal Sales Rating: ( 7)
Join Date: Jul 2005
Location: Clovis, New Mexico (not so good)
Posts: 794
Drives: '05 AS Evo VIII (96940011)
|
Quote:
Originally Posted by MR.06MR
so the mid pipe and the canister the pipes are both round and why do they send 4 of those gaskets?
|
First of all who did you buy this from? If you bought it from some company have you asked them about the gaskets? In most cases they send you one extra in case one gets damaged or lost.
When I bought a Turbo XS TBE they sent me 4 gaskets as well however no donut gasket, I ended up using the stock one. 3yrs later I'm still using the same Exh and not problems here!
Just reuse the donut gasket and install exh. and save the extra gasket incase you want to put a test pipe on or what not! 
__________________
MODS
- CBRD BBK Full
- FIC 1050cc
- KELFORD 272 CAMS
- BC SPRINGS & Ti. RET.
- GATES
- AQUAMIST HSF-1
- SPEC Super Twin P-Trim
- INJEN A/I SYS w/Amsoil filter
- TIAL Q 50mm BOV
- 3" TURBO XS CATBACK
- eBay 3" TESTPIPE
- 3" MR DN PIPE
- MR HEADER
- ETS LICP
- ETS 3.5" FMIC
- EVODAVE HEADLIGHTS
- EVO 7 TAILS
- TEIN-S
- 255 F.PUMP
- Amsoil ATM 10w30
____________________________________________
4WSTuned! R.I.P. Westley Hess (12/30/2008)
North West Evolution!!
|
|
Offline
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
| | 
|
