 |
|
Aug 13, 2007, 05:30 PM
|
#31
|
|
Evolved Member
Personal Sales Rating: ( 0)
Join Date: Jul 2006
Location: Kaiserslautern, Germany
Posts: 690
|
I have the BR Slip-fit with HFC/Magnaflow. It is sleeper at idle and mean at WOT! The best of both worlds. I wouldnt trade it.
i have a IX also and have a very slight rattle from underneath and all clamps are tight, I will have to check this "shield" thing you speak of. I know it isnt the exhaust or crossbars.
__________________
4G63 - The Little Engine That Could
WTB: Buschur Racing Slip-fit test pipe. PM me.
|
|
Offline
|
|
|
Aug 13, 2007, 05:52 PM
|
#32
|
|
Evolved Member
Personal Sales Rating: ( 21)
Join Date: Feb 2007
Location: Cut throat, Orlando
Posts: 1,907
Drives: Buschur Powered, JestR tuned EVO IX
|
Quote:
Originally Posted by Redline-Z
I have the BR Slip-fit with HFC/Magnaflow. It is sleeper at idle and mean at WOT! The best of both worlds. I wouldnt trade it.
i have a IX also and have a very slight rattle from underneath and all clamps are tight, I will have to check this "shield" thing you speak of. I know it isnt the exhaust or crossbars.
|
+1 I do get the same slight rattle on low throttle, but I'll look right now at my heat shield to see. I know my crossbar isn't touching it!
|
|
Offline
|
|
|
Aug 13, 2007, 10:26 PM
|
#33
|
|
Evolving Member
Personal Sales Rating: ( 0)
Join Date: Jul 2007
Location: ATL
Posts: 327
|
JUST a quik little question.. hehe. This has probably been explained alot of times already but would the BR tbe w/ magnaflow fit in with a JDM IX rear bumper?
__________________
"If its not breaking, then you're not going fast enough."
Quote:
Originally Posted by Wicked E
Give me 22 MALE virgins and a guaranteed house in Heaven and I'll do it... :D
|
LOL
|
|
Offline
|
|
|
Aug 13, 2007, 11:22 PM
|
#34
|
|
Evolving Member
Personal Sales Rating: ( 7)
Join Date: May 2007
Location: East Brunswick, NJ
Posts: 240
Drives: 2006 Evo 9 SE
|
Quote:
Originally Posted by eVo_Boi
JUST a quik little question.. hehe. This has probably been explained alot of times already but would the BR tbe w/ magnaflow fit in with a JDM IX rear bumper?
|
I was wondering the same but with the Bullet muffler :P
|
|
Offline
|
|
|
Aug 13, 2007, 11:25 PM
|
#35
|
|
Evolved Member
Personal Sales Rating: ( 21)
Join Date: Feb 2007
Location: Cut throat, Orlando
Posts: 1,907
Drives: Buschur Powered, JestR tuned EVO IX
|
Just let them know you got a JDM bumper and they got you covered! 
|
|
Offline
|
|
|
Aug 13, 2007, 11:40 PM
|
#36
|
|
Evolved Member
Personal Sales Rating: ( 1)
Join Date: Apr 2005
Location: Twin Cities
Posts: 634
Drives: Stock block Monster
|
Quote:
Originally Posted by LilRico
Just let them know you got a JDM bumper and they got you covered! |
Yea they can put the muffler in place of the test pipe and just run a straight pipe where the muffler normally is
__________________
Ive blown up everything on my car except my stock bottom end
|
|
Offline
|
|
|
Aug 14, 2007, 06:55 AM
|
#37
|
|
Evolving Member
Personal Sales Rating: ( 0)
Join Date: Mar 2007
Location: In front of a Catia screen
Posts: 268
Drives: 1G DSM, 07Si, E46M3
|
amazing
You know why Buschur is the best out there? When you had a problem with their exhaust instead of calling them, you posted on this site. The crew from BR still came in and tried to help. Amazing! This shop will bend over backwards for you and stand up for any thing they make. That is pretty damn rare these days.
Well done BR.
Now go take back the evo record from ams. It should belong to no one else!!
Last edited by 4G63DSM; Aug 14, 2007 at 06:56 AM.
Reason: i spell poorly
|
|
Offline
|
|
|
Aug 14, 2007, 06:57 AM
|
#38
|
|
Evolved Member
Personal Sales Rating: ( 11)
Join Date: Oct 2004
Location: Boston
Posts: 1,457
Drives: 04' TB EVO VIII
|
Quote:
Originally Posted by 4G63DSM
You know why Buschur is the best out there? When you had a problem with their exhaust instead of calling them, you posted on this site. The crew from BR still came in and tried to help. Amazing! This shop will bend over backwards for you and stand up for any thing they make. That is pretty damn rare these days.
Well done BR.
Now go take back the evo record from ams. It should belong to no one else!!
|
That was cute.
__________________
04 Tarmac Evo VIII
12.1 @ 113mph
|
|
Offline
|
|
|
Aug 14, 2007, 07:32 AM
|
#39
|
|
Account Disabled
Personal Sales Rating: ( 86)
Join Date: Aug 2003
Location: Norwalk,OH
Posts: 4,218
Drives: off the road at random and hits stuff.
|
Quote:
Originally Posted by evo8nyc
jrod ims get s better pic tom but it is a old style exhaust with the clamps but should i worry aout this since its on my ix
|
Well the thing is.... that the place it is "rubbing" appears to be the heatshield for the carrier bearing. You can either remove it which is what I would do or you can bend / cut it.
I would recommend next time that you have a problem on a item from a vendor that you purchased second hand to maybe contact the vendor first before making a thread that could potentially look bad on that vendor. If you would have purchased this brand new you would have recieved instructions that told you what needed done.
Quote:
Originally Posted by eVo_Boi
JUST a quik little question.. hehe. This has probably been explained alot of times already but would the BR tbe w/ magnaflow fit in with a JDM IX rear bumper?
|
We can not do the exhaust with the magnaflow muffler for the JDM rear 9. The muffler is to large. The reason I say it is to large is because when we set up the exhaust for the JDM rear bumper we relocate the muffler under the car in the position the off-road pipe / highflow cat would be. The magnaflow is just a hair to large to fit in that spot.
Also we only offer the option of the JDM 9 rear exhaust in the V-band system.
Quote:
Originally Posted by LilRico
+1 I do get the same slight rattle on low throttle, but I'll look right now at my heat shield to see. I know my crossbar isn't touching it!
|
Thats probably from the body kit and all the *bling* weighing down the front of the car.
 Just kiddin. Nothin but love Ruben! Your stickers went out this morning.
Quote:
Originally Posted by 4G63DSM
You know why Buschur is the best out there? When you had a problem with their exhaust instead of calling them, you posted on this site. The crew from BR still came in and tried to help. Amazing! This shop will bend over backwards for you and stand up for any thing they make. That is pretty damn rare these days.
Well done BR.
Now go take back the evo record from ams. It should belong to no one else!!
|
It wasnt even purchased new from us. It was purchased 2nd hand.
Take care guys!
|
|
Offline
|
|
|
Aug 14, 2007, 08:53 AM
|
#40
|
|
Evolved Member
Personal Sales Rating: ( 14)
Join Date: Oct 2005
Location: Albany, NY
Posts: 1,792
Drives: 2006 EVO IX RS, 2005 EVO RS, SOLD!, 1985 GLH OMNI, 1995 SUBARU WAGON (winter)
|
Quote:
Originally Posted by Kay@kacework.com
I'm not sure I would say that... It is good for the money I would say and makes good power. Also they support our comunity which is always a plus. Comments like this are just stupid tomake... Should you switch? I would say no other then if you want a different look from the tip. I'm not a huge fan of how it sticks out past the bumper.
|
I guess i should re-word it slightly.....its one of the best....
__________________
http://www.nadsny.com
Naturally Aspirated Definitely Sucks
6th Annual Evo vs. WRX/STI
Stock Appearing Heads Up WINNER!!!
11.29 @ 119.45....Stock Turbo, Stock Block, 93 Octane!
".....But mostly its a turbocharged, computerized, 4WD, road going rally car." -Jeremy Clarkson-
A Turbocharger: Air is free, might as well get as much as you can!
|
|
Offline
|
|
|
Aug 14, 2007, 09:25 AM
|
#41
|
|
Newbie
Personal Sales Rating: ( 6)
Join Date: Aug 2007
Location: south carolina
Posts: 53
Drives: evo,gsx,VR4
|
a
just another completely satisfied B.R buyer love my exaust i wouldnt tade it for nething...
__________________
I skin snakes, fry birds, bake ponies, and swat hondas like flies....
|
|
Offline
|
|
|
Aug 14, 2007, 11:54 AM
|
#42
|
|
Newbie
Personal Sales Rating: ( 2)
Join Date: Jan 2006
Location: Pompano Beach, FL
Posts: 61
Drives: a car that hasn't yet been stolen
|
I've had the Buschur TBE w/ the bullet muffler for about a year now on my IX, i love the sleeper look. I get no unwanted police attention from the muffler (that's what the wing's for :-)
Initially i had a rattle from the clamp contacting the heat shield but bending the shield fixed the issue.
The sound is amazing! I roll my windows down everytime i go under an underpass or through a tunnel just to hear it reverberate.
Props to Jarrod and the guys at Buschur for a great exhaust and awesome customer service.
|
|
Offline
|
|
|
Aug 14, 2007, 01:41 PM
|
#43
|
|
Evolved Member
Personal Sales Rating: ( 9)
Join Date: Sep 2006
Location: Atlanta, GA
Posts: 1,971
Drives: 2010 Bathurst Black Genesis Coupe V6 Track
|
I have the Buschur TBE with HFC and Magnaflow exhaust and love it as well.
I am curious though is it necessary to have some sort of gasket or donut going for the O2 housing to the downpipe for a proper seal? I know it didn't come with one and the instructions say you don't need one, but I have tightened down those two bolts as tight as I can and I am still getting an exhaust leak. Suggestions are appreciated.
|
|
Offline
|
|
|
Aug 14, 2007, 03:01 PM
|
#44
|
|
Evolving Member
Personal Sales Rating: ( 2)
Join Date: Jun 2006
Location: Detroit, Mi
Posts: 228
Drives: EVO IX MR BR 350, Audi A3 DSG, Future EVO X
|
Here's the Buschur Exhaust with Magnaflow~~
Here is a pic of the Buschur exhaust with the Magnaflow Muffler. There is really no major overhang. I like the looks a lot. This exhaust is awesome. Like everyone already said, inconspicuous when you are driving normally, yet it really wakes up when you wnat it to!!
__________________
2006 Tarmac Black Evo IX MR BR350 #21, plus AMS 4" FMIC, AMS LICP, ETS turbo intake pipe kit, Walbro 255lph fuel pump, Blox testpipe, Buschur inline MBC at 23psi, Buschur UICP, Buschur Mini-battery kit, SpeedIndustry tuned
http://www.corelineracing.com
|
|
Offline
|
|
|
Aug 14, 2007, 05:57 PM
|
#45
|
|
Newbie
Personal Sales Rating: ( 0)
Join Date: Jan 2007
Location: milford ma.
Posts: 1
Drives: 06 evo ix
|
I had a VIII and it ratlled when i shut the car off i noticed the down pipe was hitting the oil pan.(barely)I took the downpipe off and gave the downpipe a love tap with a ball-n-peen.Check the clearance at this spot.I installed the br tbe on my new IX and the clearance was about the same.
|
|
Offline
|
|
|
|
|
Tags
|
0203, buschur, carrier, crossbar, evo, exhaust, fuel, lancer, pump, racing, rattle, sti  |
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
| | 
|
