evolutionm.net - Home of the Lancer Evolution
Home Features Community Marketplace Registry Garage

Go Back   evolutionm.net > Lancer Evolution 1-9 Forums > Evo Engine / Turbo / Drivetrain
New! Use your Facebook, Google, AIM & Yahoo accounts to securely log into this site, click logo to login  

Welcome to EvolutionM.net!
Welcome to EvolutionM.net.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!


Reply
 
Thread Tools
Old Nov 4, 2009, 07:48 PM   #16
Evolving Member
Personal Sales Rating: (0)
 
NitrousOxide's Avatar
 
Join Date: Dec 2008
Location: UAE
Posts: 190

Drives: 2006 EVO IX GSR

Quote:
Originally Posted by Piro Fyre View Post
There IS power restrictions because of air flow. A silencer restricts air flow to have it quiet down but at the same time, you lose performance. You'll still be able to get on it but it won't be the same as without one installed.

If you're worried about sound too much, you can try getting a cat to see if it'll be more quiet. Even with a cat, you still get air flow restriction. Or you can do what one of the guys around here did. He installed 2 Magnaflows on his exhaust. Otherwise, a resonator would be your best bet if you still want the performance to stay somewhat the same with idle sound to be more quiet then a catless.
ThanX a lot my dear! you were very help

Have you seen the apexi N1 in person?
__________________
Quote:
Originally Posted by Steve93Talon View Post
I heard FP is coming out with the FP Clear™. The compressor wheel is made out of transparent aluminum. It reaches full boost before you even start the engine, and it's so fast you'll actually create a rift in the space-time continuum and cross the finish line before you even leave the starting line. Discuss.
Online
 
Reply With Quote
Old Nov 5, 2009, 11:05 AM   #17
Evolving Member
Personal Sales Rating: (0)
 
NitrousOxide's Avatar
 
Join Date: Dec 2008
Location: UAE
Posts: 190

Drives: 2006 EVO IX GSR

Which exhaust is louder, the apexi n1 or the blitz nur spec r???
__________________
Quote:
Originally Posted by Steve93Talon View Post
I heard FP is coming out with the FP Clear™. The compressor wheel is made out of transparent aluminum. It reaches full boost before you even start the engine, and it's so fast you'll actually create a rift in the space-time continuum and cross the finish line before you even leave the starting line. Discuss.
Online
 
Reply With Quote
Old Nov 5, 2009, 12:05 PM   #18
Evolving Member
Personal Sales Rating: (4)
 
Piro Fyre's Avatar
 
Join Date: Feb 2009
Location: Milwaukee, WI
Posts: 172

Drives: 2003 Evolution - Yellow

http://www.carreview.com/mfr/blitz/c...7_1580crx.aspx
Someone commented on getting pulled over for the Blitz but TBH, I don't know. I'm planning on getting an Apexi N1 from someone but because of my recent problems, it will have to be delayed.
Here's user reviews for Apexi N1.
http://www.carreview.com/mfr/apex/ca...5_1580crx.aspx
Offline
 
Reply With Quote
Old Nov 5, 2009, 12:28 PM   #19
Evolved Member
Personal Sales Rating: (1)
 
BLKCarbonEVO's Avatar
 
Join Date: Nov 2008
Location: Oak Harbor, WA
Posts: 822

Drives: 2006 EVO IXMR

Send a message via MSN to BLKCarbonEVO
Dude go Apexi N1. You can even get a black on like I have so its not so "flashy". Also the N1 has a great tone and not to loud till you WOT. Then it is balls to the wall

Get a external dump but I would not get the MAPthingy. They have not had the best review. The external dump will give you more hp over a recirculated and allow for better boost control. At least 15+hp and you will hold another 2-3psi at redline. The thing about dumps is you don't hear them till they crack open. I have the 18psi act in my car at it cracks open at 20psi. You will never hear it unless you are racing then if you get pulled over by a cop your going to get a speeding ticket, not an exhaust ticket. jmo but you can do what you want. I will never go recirc again. Infact we may be making a 3.5in 02 housing with a 2.5in dump tube and a 3.5in exhaust system soon. That will be nasty on a Black

Mikey
__________________
Mikey's 2006 EVO IX MR: ER VIII 5speed, Magnus v5, 3.8" Garrett FMIC, ETS Short Route UICP, TurboSmart RacePort BOV, RC 880cc Injectors, Perrin Fuel Rail, Walbro 255, ARP Head Studs, HKS 272/280, HKS EBC, R/TErnie Ported Exhaust Manifold, R/TErnie Full 3" V-Band External Dump O2 housing, R/TErnie Modified Perrin 3" V-Band Downpipe, Nesei LICP, FP 25psi Wastegate, Apexi N1 Test-Back, AEM Meth kit (M15), Exedy Twin Plate, FP Red+30lbs+ER Tune = 520hp/406tq

http://www.myspace.com/blkcarbonevo
Offline
 
Reply With Quote
Old Nov 5, 2009, 12:39 PM   #20
Evolved Member
Personal Sales Rating: (7)
 
Join Date: May 2003
Location: Jeffersonville, IN / Louisville KY
Posts: 2,705

Drives: 2006 EVO 9 SE

Send a message via AIM to Corey
Try looking into the Apexi GT-Spec as well. Full polished stainless steel and it goes from 3" to 3.5". I believe the N-1 is aluminized steel with some coating on it. Plus, Gruppe-S is selling GT-Spec's for $500 shipped.

I have the GT-Spec on my car and with a test pipe its rather loud at WOT, but with a cat it was toned down a bit.
__________________
2006 Graphite Gray Evo 9 SE
Offline
 
Reply With Quote
Old Nov 5, 2009, 12:44 PM   #21
Evolved Member
Personal Sales Rating: (1)
 
BLKCarbonEVO's Avatar
 
Join Date: Nov 2008
Location: Oak Harbor, WA
Posts: 822

Drives: 2006 EVO IXMR

Send a message via MSN to BLKCarbonEVO
Quote:
Originally Posted by Corey View Post
Try looking into the Apexi GT-Spec as well. Full polished stainless steel and it goes from 3" to 3.5". I believe the N-1 is aluminized steel with some coating on it. Plus, Gruppe-S is selling GT-Spec's for $500 shipped.

I have the GT-Spec on my car and with a test pipe its rather loud at WOT, but with a cat it was toned down a bit.
The OP is not looking for something to loud and the N1 is quiter under cruise than the GT anyday and the GT is louder all around... bad choice. And who wants to run a "plug = cat" in the exhaust line and lose 20+ hp and have slower spool just to keep a loud exhaust quiet? no one.

Mikey
__________________
Mikey's 2006 EVO IX MR: ER VIII 5speed, Magnus v5, 3.8" Garrett FMIC, ETS Short Route UICP, TurboSmart RacePort BOV, RC 880cc Injectors, Perrin Fuel Rail, Walbro 255, ARP Head Studs, HKS 272/280, HKS EBC, R/TErnie Ported Exhaust Manifold, R/TErnie Full 3" V-Band External Dump O2 housing, R/TErnie Modified Perrin 3" V-Band Downpipe, Nesei LICP, FP 25psi Wastegate, Apexi N1 Test-Back, AEM Meth kit (M15), Exedy Twin Plate, FP Red+30lbs+ER Tune = 520hp/406tq

http://www.myspace.com/blkcarbonevo
Offline
 
Reply With Quote
Old Nov 5, 2009, 03:03 PM   #22
Evolving Member
Personal Sales Rating: (0)
 
NitrousOxide's Avatar
 
Join Date: Dec 2008
Location: UAE
Posts: 190

Drives: 2006 EVO IX GSR

Quote:
Originally Posted by Piro Fyre View Post
http://www.carreview.com/mfr/blitz/c...7_1580crx.aspx
Someone commented on getting pulled over for the Blitz but TBH, I don't know. I'm planning on getting an Apexi N1 from someone but because of my recent problems, it will have to be delayed.
Here's user reviews for Apexi N1.
http://www.carreview.com/mfr/apex/ca...5_1580crx.aspx
ThanX a lot Pire Fyre, REALLY appreciate ur effort

Quote:
Originally Posted by BLKCarbonEVO View Post
Dude go Apexi N1. You can even get a black on like I have so its not so "flashy". Also the N1 has a great tone and not to loud till you WOT. Then it is balls to the wall

Get a external dump but I would not get the MAPthingy. They have not had the best review. The external dump will give you more hp over a recirculated and allow for better boost control. At least 15+hp and you will hold another 2-3psi at redline. The thing about dumps is you don't hear them till they crack open. I have the 18psi act in my car at it cracks open at 20psi. You will never hear it unless you are racing then if you get pulled over by a cop your going to get a speeding ticket, not an exhaust ticket. jmo but you can do what you want. I will never go recirc again. Infact we may be making a 3.5in 02 housing with a 2.5in dump tube and a 3.5in exhaust system soon. That will be nasty on a Black

Mikey

ThanX Mikey,

Ok, now, If I got the N1, what parts do I have to get to complete a full TBE?? Currently I have the Invidia 3'' testpipe laying back on the table

I'm leaning more toward the External dump, but i TOTALLY have no idea what company makes best parts!!

Im looking for a full 3" setup!
__________________
Quote:
Originally Posted by Steve93Talon View Post
I heard FP is coming out with the FP Clear™. The compressor wheel is made out of transparent aluminum. It reaches full boost before you even start the engine, and it's so fast you'll actually create a rift in the space-time continuum and cross the finish line before you even leave the starting line. Discuss.
Online
 
Reply With Quote
Old Nov 5, 2009, 05:05 PM   #23
Evolved Member
Personal Sales Rating: (5)
 
DBallz's Avatar
 
Join Date: Sep 2004
Location: South Beach, FL / Miami, FL / Pt. St. Lucie, FL / NYC
Posts: 1,068

Drives: 05 Apex Silver Version 8, 2001 GSX-R 1000

Send a message via AIM to DBallz
I have the Apexi N1 and it's very tame for an exhaust. But if your interested the Apexi WS is actually quieter. I have a clip of the N1 at idle and 2 step. Excuse me giving the camera the finger. Oh yeah that video was taken when my idle was high 1200 to be exact, now I have it low 980. Check it out http://www.youtube.com/watch?v=Dymr0Ey0tvE
__________________
Stock Block and Head
FP Red 80mm
Kelford 272's
Beehive Springs
Precision 1k injectors
EPM 02 Dump
ETS 3.5" IC Kit
APS BOV
PPI Extreme Ported Hotside, Exhaust Mani, Intake Mani, and TB
469@28psi on 93
Junior Tuned
THE SHOP CT built

Old setup
Stock Evo 8 Turbo
322.7 whp 320tq 21.5 psi on 93 oct
355.8 whp 430tq 25 psi on c16
Online
 
Reply With Quote
Old Nov 5, 2009, 05:14 PM   #24
Evolving Member
Personal Sales Rating: (0)
 
NitrousOxide's Avatar
 
Join Date: Dec 2008
Location: UAE
Posts: 190

Drives: 2006 EVO IX GSR

Quote:
Originally Posted by DBallz View Post
I have the Apexi N1 and it's very tame for an exhaust. But if your interested the Apexi WS is actually quieter. I have a clip of the N1 at idle and 2 step. Excuse me giving the camera the finger. Oh yeah that video was taken when my idle was high 1200 to be exact, now I have it low 980. Check it out http://www.youtube.com/watch?v=Dymr0Ey0tvE
lol, Ive seen this video several times and I like it!! Very Funny!!

But why is there a lot of difference b/w urs and this one?
http://www.youtube.com/watch?v=zJVRm2Cdx64

and this one
http://www.youtube.com/watch?v=9vPfI3MqVsE
__________________
Quote:
Originally Posted by Steve93Talon View Post
I heard FP is coming out with the FP Clear™. The compressor wheel is made out of transparent aluminum. It reaches full boost before you even start the engine, and it's so fast you'll actually create a rift in the space-time continuum and cross the finish line before you even leave the starting line. Discuss.
Online
 
Reply With Quote
Old Nov 5, 2009, 05:17 PM   #25
Evolving Member
Personal Sales Rating: (6)
 
Join Date: Sep 2007
Location: Orange County, NY
Posts: 457

Drives: EVO VIII MR

It is relatively quiet compared to most. It has quite a large resonator in it still. Power performance is just as good, but keeps it low key. I'm very happy with my choice of the N1
__________________
GG VIII MR
Apexi TBE // O2 Housing // IX BPV // Hallman Pro MBC // Cobb AP Stage 2 @ 22lbs // Injen UICP & Intake // ETS LICP
DBA // Project Mu
Offline
 
Reply With Quote
Old Nov 5, 2009, 05:23 PM   #26
Evolving Member
Personal Sales Rating: (0)
 
NitrousOxide's Avatar
 
Join Date: Dec 2008
Location: UAE
Posts: 190

Drives: 2006 EVO IX GSR

Quote:
Originally Posted by evo unknown View Post
It is relatively quiet compared to most. It has quite a large resonator in it still. Power performance is just as good, but keeps it low key. I'm very happy with my choice of the N1
How does it sound at low RPMs?
__________________
Quote:
Originally Posted by Steve93Talon View Post
I heard FP is coming out with the FP Clear™. The compressor wheel is made out of transparent aluminum. It reaches full boost before you even start the engine, and it's so fast you'll actually create a rift in the space-time continuum and cross the finish line before you even leave the starting line. Discuss.
Online
 
Reply With Quote
Old Nov 5, 2009, 05:42 PM   #27
Evolved Member
Personal Sales Rating: (1)
 
BLKCarbonEVO's Avatar
 
Join Date: Nov 2008
Location: Oak Harbor, WA
Posts: 822

Drives: 2006 EVO IXMR

Send a message via MSN to BLKCarbonEVO
Quote:
Originally Posted by NitrousOxide View Post
How does it sound at low RPMs?
Very deep! I wish I had a vid. hell I would run out and vid real quick for you but my damn camera is broke. Thanks Steven The N1 on my car sounds like a deep desial truck at low rpms and at low boost less than 5psi... I don't know if anyone else's sounds like this but it is SICK!

Mikey
__________________
Mikey's 2006 EVO IX MR: ER VIII 5speed, Magnus v5, 3.8" Garrett FMIC, ETS Short Route UICP, TurboSmart RacePort BOV, RC 880cc Injectors, Perrin Fuel Rail, Walbro 255, ARP Head Studs, HKS 272/280, HKS EBC, R/TErnie Ported Exhaust Manifold, R/TErnie Full 3" V-Band External Dump O2 housing, R/TErnie Modified Perrin 3" V-Band Downpipe, Nesei LICP, FP 25psi Wastegate, Apexi N1 Test-Back, AEM Meth kit (M15), Exedy Twin Plate, FP Red+30lbs+ER Tune = 520hp/406tq

http://www.myspace.com/blkcarbonevo
Offline
 
Reply With Quote
Old Nov 5, 2009, 06:56 PM   #28
Newbie
Personal Sales Rating: (3)
 
LanEvo9MR's Avatar
 
Join Date: Feb 2008
Location: N.J
Posts: 82

Drives: Silver IX MR SE

If you want a quiet exhaust, then look for Fujitsubo. I think its the quiest exhaust I have heard in person. and it performs very well.
__________________
Apex Silver IX MR SE
*Ivey Tuned*
*Slidewayz Suspension Tuned*
Offline
 
Reply With Quote
Old Nov 5, 2009, 07:35 PM   #29
Evolved Member
Personal Sales Rating: (5)
 
DBallz's Avatar
 
Join Date: Sep 2004
Location: South Beach, FL / Miami, FL / Pt. St. Lucie, FL / NYC
Posts: 1,068

Drives: 05 Apex Silver Version 8, 2001 GSX-R 1000

Send a message via AIM to DBallz
Quote:
Originally Posted by NitrousOxide View Post
lol, Ive seen this video several times and I like it!! Very Funny!!

But why is there a lot of difference b/w urs and this one?
http://www.youtube.com/watch?v=zJVRm2Cdx64

and this one
http://www.youtube.com/watch?v=9vPfI3MqVsE
That is a very good question I have noticed that the exhaust tone has changed at least several times. When it was just a cat back it was super quiet, when I put on the DC Sport SP got a bit more sound to it but still very tame, when I changed the o2 housing a bit louder but still tame WOT though was something new and fun....I love the tone of hearing the WG open, when I installed the HKS 272's ok this was the sounds I was looking for mix of tame and loud if that makes sense. Since then I have changed my setup as you see in my sig. I think all the port work I have done on the exhaust side and the larger o2 dump plays a role in the new tone to the exhaust. I will try and see if I can take some video tomorrow of my new lower idle when I get to work
__________________
Stock Block and Head
FP Red 80mm
Kelford 272's
Beehive Springs
Precision 1k injectors
EPM 02 Dump
ETS 3.5" IC Kit
APS BOV
PPI Extreme Ported Hotside, Exhaust Mani, Intake Mani, and TB
469@28psi on 93
Junior Tuned
THE SHOP CT built

Old setup
Stock Evo 8 Turbo
322.7 whp 320tq 21.5 psi on 93 oct
355.8 whp 430tq 25 psi on c16
Online
 
Reply With Quote
Old Nov 5, 2009, 08:14 PM   #30
Evolved Member
Personal Sales Rating: (1)
 
BLKCarbonEVO's Avatar
 
Join Date: Nov 2008
Location: Oak Harbor, WA
Posts: 822

Drives: 2006 EVO IXMR

Send a message via MSN to BLKCarbonEVO
Quote:
Originally Posted by LanEvo9MR View Post
If you want a quiet exhaust, then look for Fujitsubo. I think its the quiest exhaust I have heard in person. and it performs very well.
I had a Fujitsubo and it was loud. Not as loud as my N1 but it is not quite
__________________
Mikey's 2006 EVO IX MR: ER VIII 5speed, Magnus v5, 3.8" Garrett FMIC, ETS Short Route UICP, TurboSmart RacePort BOV, RC 880cc Injectors, Perrin Fuel Rail, Walbro 255, ARP Head Studs, HKS 272/280, HKS EBC, R/TErnie Ported Exhaust Manifold, R/TErnie Full 3" V-Band External Dump O2 housing, R/TErnie Modified Perrin 3" V-Band Downpipe, Nesei LICP, FP 25psi Wastegate, Apexi N1 Test-Back, AEM Meth kit (M15), Exedy Twin Plate, FP Red+30lbs+ER Tune = 520hp/406tq

http://www.myspace.com/blkcarbonevo
Offline
 
Reply With Quote
Reply

Tags
apexi, buschur, cops, downpipe, drone, exhaust, flow, forum, hipower, hks, loud, louder, muffler, n1, problem

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off

 



All times are GMT -7. The time now is 10:13 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.2.0