 |
|
Oct 23, 2009, 09:03 AM
|
#1
|
|
Silver Sponsor
Personal Sales Rating: ( 46)
Join Date: Dec 2004
Location: york, pa 17402
Posts: 4,092
Drives: LOT's'O'EVO's
|
CBRD 33R...492whp 93 octane...
This is a customer car that was shipped to us from Florida.
When it came here, it had an AEM, PT67 turbo, tilton clutch.. etc....
The customer got taken to the cleaners by someone down there, and the car just wasnt proper..
coilovers... sitting at stock rideheight.... alignment way off... 5 speed trans swapped from 6.... but not even built....
the Cold start was soooo bad it wouldnt run, and couple that with the tilton clutch, it was terrible to drive, and didnt make good boost until almost 5000rpm...
Our client stated "i wanted a fun street car, and they tried to build me a Drag car... please just make it fun to drive..."
So we dropped the AEM in favor of stock ecu... we dropped the pt67 in favor of our TAK33R turbo (non billet)... and we put an exedy twin push style in it...
we also adjusted the preload and ride height on the coilovers, had Shep build the trans, and aligned her to CBRD specs...
the results... she starts right up... and makes killer power...
here is the chart
Good power on pump, but unfortunately we were out of injector up top at 30psi...
this is stock intake manifold and throttle body... I think with larger injectors and more boost it would be good for 530whp.. like our time Attack car...
But, i had told our client it would make 440whp nicely and pick up alot of spool... which it did...20psi around 3800 rpm....
so anyway... just another post... food for thought!
and the car ships back to florida next week!
cheers
happy friday
CB
__________________
www.cbrdspeedfactory.com
Immaculately prepared facility... State of the Art equipment..
Proven Motorsports Background.. ALMS, Grand-Am, Open wheel...
www.ChadBlock.com
CBRD Radiators, BBK Turbos, Intercoolers, EVO X parts, and CBRD Time Attack EVO backed by Advan
The standard just became standard. Meeting expectations is now not acceptable... we must always exceed them.
|
|
Offline
|
|
|
Oct 23, 2009, 09:09 AM
|
#2
|
|
Silver Sponsor
Personal Sales Rating: ( 46)
Join Date: Dec 2004
Location: york, pa 17402
Posts: 4,092
Drives: LOT's'O'EVO's
|
a few notes:
not sure what cams are in it.. but they arent lopey... and i BELIEVE its a BR 2.3 block... head has a little work.
motor is quiet on the logger, a little piston slap audibly.. which isn't typical for the 2.3's we run... but it did tune nicely...
this is a .63 5 bolt hotside shearer/buschur kit... with our billet wheel it would pick up a little spool and power... but the non billet is still working well!
cheers
cb
__________________
www.cbrdspeedfactory.com
Immaculately prepared facility... State of the Art equipment..
Proven Motorsports Background.. ALMS, Grand-Am, Open wheel...
www.ChadBlock.com
CBRD Radiators, BBK Turbos, Intercoolers, EVO X parts, and CBRD Time Attack EVO backed by Advan
The standard just became standard. Meeting expectations is now not acceptable... we must always exceed them.
|
|
Offline
|
|
|
Oct 23, 2009, 09:19 AM
|
#3
|
Personal Sales Rating: ( 40)
Join Date: Mar 2007
Location: La Center, WA
Posts: 2,111
Drives: Operation Damaged Goods - 03 Yellow Evo
|
Not Bad.. One side of the spectrum to the other. 500whp is nice for a daily 
__________________
Michael
Site: Extreme Turbo Systems
Pho: 360-263-3748
AIM: ETS MichaelR
Evo X Stock Block/Stock Head - World Record - 681whp (ETS 3586 Turbo Kit)
Evo X ETS Built Motor - 2.0L World Record - 718whp (ETS 3586 Turbo Kit)
1117whp Evolution 8 (ETS 42R Turbo Kit)
ETS 6.0" Intercooler - ETS 45R Turbo Kit - ETS Exhaust - English Racing Motor - English Racing Tune
ETS Holiday Specials On Our Website!! 20% Off ETS Products!!
|
|
Offline
|
|
|
Oct 23, 2009, 09:27 AM
|
#4
|
|
Silver Sponsor
Personal Sales Rating: ( 46)
Join Date: Dec 2004
Location: york, pa 17402
Posts: 4,092
Drives: LOT's'O'EVO's
|
Michael,
we have another 2.3 liter build (BR motor and head) with jun cams, hyper tune intake manifold, 3" tbody, BR fmic, and your manifold and downpipe...
it has one size up from our 33R on it.. and I expect that one on pump to make another 40whp over this one...
so it should be no slouch, with 530whp-ish on stock ecu in a street car...
cb
__________________
www.cbrdspeedfactory.com
Immaculately prepared facility... State of the Art equipment..
Proven Motorsports Background.. ALMS, Grand-Am, Open wheel...
www.ChadBlock.com
CBRD Radiators, BBK Turbos, Intercoolers, EVO X parts, and CBRD Time Attack EVO backed by Advan
The standard just became standard. Meeting expectations is now not acceptable... we must always exceed them.
|
|
Offline
|
|
|
Oct 23, 2009, 09:34 AM
|
#5
|
|
Evolved Member
Personal Sales Rating: ( 33)
Join Date: Jun 2005
Location: Hagerstown
Posts: 3,023
Drives: 04 EVO VIII - Tarmac
|
Very interesting setup. That 2.3 really shines on these bigger turbos. My 3065 in comparison at 28-29 lbs, made 449 on the stock block with 64,000 miles at CBRD, but max boost wasnt achieved until 5500 or so.
Impressive indeed. Glad to see my old daily driver still ranks up there with these new builds.
|
|
Offline
|
|
|
Oct 23, 2009, 09:35 AM
|
#6
|
|
Evolving Member
Personal Sales Rating: ( 16)
Join Date: May 2006
Location: New Jersey
Posts: 214
|
Nice work... Next time try out the 12-tooth triggerdisc and keep the AEM, start ups are better than stock!
|
|
Offline
|
|
|
Oct 23, 2009, 09:36 AM
|
#7
|
|
Newbie
Personal Sales Rating: ( 1)
Join Date: Jun 2009
Location: Fredericksburg, VA
Posts: 87
Drives: 06 Evo MR
|
seems like CBRD is the place to go when you want something done right!!! i will be making the drive soon 
|
|
Offline
|
|
|
Oct 23, 2009, 10:10 AM
|
#8
|
|
Silver Sponsor
Personal Sales Rating: ( 46)
Join Date: Dec 2004
Location: york, pa 17402
Posts: 4,092
Drives: LOT's'O'EVO's
|
Quote:
Originally Posted by Philthy748
Nice work... Next time try out the 12-tooth triggerdisc and keep the AEM, start ups are better than stock!
|
in my opinion, there is no need for the AEM on this car...
at this power level stock ecu works great, still emissions legal.... etc... and he can sell his aem and get some money back.. etc..
that being said, AEM is on our TA car 
cb
__________________
www.cbrdspeedfactory.com
Immaculately prepared facility... State of the Art equipment..
Proven Motorsports Background.. ALMS, Grand-Am, Open wheel...
www.ChadBlock.com
CBRD Radiators, BBK Turbos, Intercoolers, EVO X parts, and CBRD Time Attack EVO backed by Advan
The standard just became standard. Meeting expectations is now not acceptable... we must always exceed them.
|
|
Offline
|
|
|
Oct 23, 2009, 10:21 AM
|
#9
|
|
Evolving Member
Personal Sales Rating: ( 16)
Join Date: May 2006
Location: New Jersey
Posts: 214
|
Quote:
Originally Posted by CBRD
in my opinion, there is no need for the AEM on this car...
at this power level stock ecu works great, still emissions legal.... etc... and he can sell his aem and get some money back.. etc..
that being said, AEM is on our TA car
cb |
Florida, has ZERO emissions laws...  Either way, good job!
|
|
Offline
|
|
|
Oct 23, 2009, 10:22 AM
|
#10
|
|
Evolved Member
Personal Sales Rating: ( 5)
Join Date: Dec 2005
Location: Cleveland, OH
Posts: 1,318
Drives: 00 Eclipse GT SDS Stg. 3 & 08 RR EVO X GSR
|
Nice results Chad!!!
I remember seeing that car on the lot. Seems like it got great numbers.
__________________
List:
-CBRD Tune -COBB AP -COBB UICP, LICP, BOV HP -COBB SFI -COBB Turbo Inlet Pipe -COBB Sway Bars -ETS 4" FMIC -AMS DP -T1R Exhaust -MXP TP -FORGE WGA -xMR Catch Cans -AMS Front Rollerstop -AMS Fuel Rail -evoDynamics 3 Port -Deatschwerks 800cc -Techna-Fit SS Lines -TWM Short Shifter -WORKS Bushings -SWIFT Sport-Mach's -Whiteline Kit -AEM UEGO -STRI PSI Gauge -Rally Armor Mudflaps -PERRIN 3" Ant.
Future:
ROTA Torque
CBRD BBK Turbo
Kelford Stg.2 w Springs
SteepSpeed Exhaust Manifold
|
|
Offline
|
|
|
Oct 23, 2009, 10:29 AM
|
#11
|
|
Evolved Member
Personal Sales Rating: ( 3)
My Garage
Join Date: Apr 2007
Location: Bronx, NY
Posts: 1,174
Drives: Evo IX SE
|
Was that with the hot sauce tune?  Great results man
__________________
Life is an adventure enjoy while you have it!
Evodan2004 Built, Kreionic Tuned, 348.0whp/316.7wtq, 25Psi CBRD Mustang Dyno
Boltons Plus Cams, Stock IM, TB, EX Manifold, 02 Housing, stock head.
|
|
Offline
|
|
|
Oct 23, 2009, 10:35 AM
|
#12
|
|
Silver Sponsor
Personal Sales Rating: ( 46)
Join Date: Dec 2004
Location: york, pa 17402
Posts: 4,092
Drives: LOT's'O'EVO's
|
Quote:
Originally Posted by Philthy748
Florida, has ZERO emissions laws... Either way, good job! |
I wasnt stating for florida,
i was saying in general,
most of our cars are PA, MD, DE, NY... PA needs to be emissions legal.
plus again, many of us are proving that indeed we can make power on stock ecu, look at JESTR, DB/BR, etc...
cb
__________________
www.cbrdspeedfactory.com
Immaculately prepared facility... State of the Art equipment..
Proven Motorsports Background.. ALMS, Grand-Am, Open wheel...
www.ChadBlock.com
CBRD Radiators, BBK Turbos, Intercoolers, EVO X parts, and CBRD Time Attack EVO backed by Advan
The standard just became standard. Meeting expectations is now not acceptable... we must always exceed them.
|
|
Offline
|
|
|
Oct 23, 2009, 10:44 AM
|
#13
|
|
Evolved Member
Personal Sales Rating: ( 6)
Join Date: Oct 2006
Location: Minneapolis
Posts: 2,962
Drives: 05 Evo8 SSL
|
Nice. Got any before dyno plots? Would be cool to compare. Looks like a fun/mean street car setup!
|
|
Offline
|
|
|
Oct 23, 2009, 10:49 AM
|
#14
|
|
Evolved Member
Personal Sales Rating: ( 48)
Join Date: Feb 2004
Location: Redmond - Lake Tapps ,WA
Posts: 2,368
Drives: 03 EVO VIII White
|
How many degrees of timing were you able to get out the top on pump gas and 30 psi? I'd love to see what that could do on E85.
__________________
jid2 Built: Now featuring E85 super fuel
2.3L - GT3076R .63A/R, ETS equal length, Kelford 272's, BC valve springs, 1mm O/S valves, FIC BM 1450's, Full-Blown dual Walbros, Buschur IC, jid2 intake, airbox, IC pipes, APS BOV, TBE, ACT HDSS, Stock ECU, 28 psi 466hp/420 ft-lb...
Build Thread
Binary Lowered Recaro Seats, Girodisc 2-Piece, brake ducting, ST43's, SS lines and ATE Superblue, KW V3's 8K/10K, jid2 flat-bottom, adjustable splitter and aero, 18x9.5 +40 NT03's 265/18/35 BFG R1's
|
|
Offline
|
|
|
Oct 23, 2009, 10:55 AM
|
#15
|
|
Evolved Member
Personal Sales Rating: ( 33)
Join Date: Jun 2005
Location: Hagerstown
Posts: 3,023
Drives: 04 EVO VIII - Tarmac
|
Quote:
Originally Posted by CBRD
I wasnt stating for florida,
i was saying in general,
most of our cars are PA, MD, DE, NY... PA needs to be emissions legal.
plus again, many of us are proving that indeed we can make power on stock ecu, look at JESTR, DB/BR, etc...
cb
|
Not here in WV!! Lights, Horn, Wipers...Thank you come again!
Stock ecu FTW IMO. I can't wait until the speed density issues are completly sorted for the stock ecu.
|
|
Offline
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
| | 
|
