AVIC-N3 Installation/EVO9

johncloo · Mar 19, 2007, 06:02 PM

Hello all! I will be installing a Pioneer AVIC-N3 into my EVO9 and I was looking for info as to where I should tap into the Speed sense. I did a seach for ECU wiring diagrams, and I found one that had a picture but the link was broken. Any help on this install would be much appreciated!

NoTec · Mar 23, 2007, 07:29 AM

Its located in the OBD2 port, underneath the drivers side of the dash, above the gas pedal area. The wire is a white/black wire, or black/red, depending on what year vehicle you have.

Hen5000 · Mar 26, 2007, 10:23 AM

I did a bit of research and i'm starting to get really confused on the adapters we need to buy for stock speakers. So to confirm I need 2 adapters to get the N3 to work with the stock speakers and sub? I currently own an 05 Evo with SSL

Correct me if i'm wrong I did some searches and it seems like i need
MITSRCVR adapter for the speakers
And this harness for the amp?

rlui0514 · Mar 26, 2007, 07:24 PM

Quote:

Originally Posted by Hen5000

I did a bit of research and i'm starting to get really confused on the adapters we need to buy for stock speakers. So to confirm I need 2 adapters to get the N3 to work with the stock speakers and sub? I currently own an 05 Evo with SSL

Correct me if i'm wrong I did some searches and it seems like i need
MITSRCVR adapter for the speakers
And this harness for the amp?

Hen5000* i believe metra makes one harness for both of ur needs which is the METRA 70-7003 if you go on the metra site you will find it

hope this helps