foxbat

What's the part # for the GM IAT sensor with weld bung & connector? I need to order one for an Evo 5 SD conversion.

todd6027

iTrader: (10)

that will do , i tend to go for ones with smaller thread, those gm are 3/8th taper iirc

todd6027

iTrader: (10)

double post

211Ratsbud

iTrader: (1)

Vipec or link distribute a 1/8 bspt ~ roughly npt and fits well enough to work in manifold connections. I used an aftermarket gm replacement, www.diyautotune.com has an assortment of that stuff available too.

Picked mine up at a parts store.

http://m.ebay.com/itm?itemId=330972627462

wreckleford

iTrader: (2)

ECMLink sells them.

foxbat

Okay, following that ebay link, the correct part # is 25036751
Thanks guys

wreckleford

iTrader: (2)

Don't want to look like I am pushing anything, but for $10 more you get a pre made pigtail and bung from ECMLink.

3SgteGuru

iTrader: (3)

Sensor is a delphi 25037225
Data sheet https://delphi.com/connectors/assets...25037225ds.pdf

Connector Delphi 15336004
http://delphi.com/connectors/product/view/15336004
lock 15305024
Term Gold 15326428
Term Silver 13794882
Seal 15305171

W crimp it, thats a push to seat.

Dont buy pigtails, they are crap. Call RaceSpec they'll get you set up with everything most likely even the crimper and wire. Even a new ECU Term so you dont have to cut your factory harness.