mrfred

iTrader: (50)

Looks kinda big to easily fit in there, but the price is amazing. Is the display itself 18x11 cm or is the size of the unit 18x11 cm? Can it be used with the external ADC cable that you have?

osetsky

Pre-ordered. Screwed up and forgot to add the 1.3 cable in the order. Blast!

dr_latino999

iTrader: (12)

I want to pre-order the cable to use in a 3000 mile cross country drive for some long distance logging, but will it be at our doorsteps by Dec 13?

justastockevo

iTrader: (1)

iphones are for p**sies who never give a damn about the tech and want to look geeky.

i want an apk, got too many android devices lying around already. will it work with bluetooth/wifi obd2 dongle and which one i'd need?

Gsxtremedsm

iTrader: (15)

Ok, it's late and I prolly just didn't read close enough.. so I already have the openport 1.3u cable and an android tablet and a galaxy s3..

Can I use any of these? or would I still need to buy your tablet and extra cable?

dolphin888

I want apk too, I'm not going to buy additional device, I am satisfied with what I have.
I have OTG USB cable and OP 2.0

vmrevo9

iTrader: (33)

Pm sent!

Ian0611

iTrader: (41)

Maybe I missed it somewhere, but are we able to reflash with this as well or only do logging right now? What program does it (or will it) use for tuning and reflashing? Evoscan or Ecuflash??

imAnooblikeU

Is the evodroid compatible with Subarus? If not, any plans to add compatibility in the future?

Also, is there any way to connect the DLP IO8 to this?

evoscan

iTrader: (-1)

looks to me kinda like it will easily fit in there.. yep I tried it at again.. fits super easy. its super thin. yes the size of the unit is 18x11cm, lol one of the biggest requests with the 5inch gpsnav, was can it be a little bigger, ahaha.

there is no such thing as an "external ADC cable", I think you are referring to the openport 1.3DA or openport 3.0DA cable which both have 4x ADC 0-5v input channels.

and yes you can use it as a straight 4 channel ADC datalogger if you like using either of the Openport 1.3DA or 3.0DA cables. but you will need to get power to the device through the OBDII port though, for example pin16(12v +) and pin4(-ve) on openport obd connect need to be powered.

if you give me more details on what you are trying to log with the ADC and are you running this for an EvoX or Evo7/8/9 perhaps? I can give you more specific ideas.

evoscan

iTrader: (-1)

yes it works on any resolution, the existing gauge designer program still works, so you can edit any design you like for any resolution. it outputs a txt file with the resolution in the filename, for example 800x480_Carbon1.txt and 480x800_Carbon1.txt and you can have any background image filename you like.

evoscan

iTrader: (-1)

you have PM, you can pay directly to evoscan paypal and I'll update your order. oh, and by the way, its called an EvoScan OpenPort 1.3DA cable.

evoscan

iTrader: (-1)

yes, if it becomes very popular for Mitsubishi Evo, then we will also extend out to Subaru also.

you don't need the DLP-IO8 because it is an all in one solution now, which means you can use the new openport cable in place of the dlp-io8
the EvoScan Openport 1.3DA and 3.0DA has 6 connections, 4 for external devices... 1 for sensor/serial ground (negative) and 5v for powering certain sensors than need 5volts.

1. ADC (0-5v Sensor input) also works as a switch input or switch output.
2. ADC (0-5v Sensor input) also works as a switch input or switch output.
3. ADC (0-5v Sensor input) also works as a switch input or switch output.
4. ADC (0-5v Sensor input) also works as a switch input or switch output.
any of the above 4 can also be used for Serial Input from a Wideband, up to a maximum of 4 widebands connected at once.
5. Ground (for Sensors and Serial Wideband input)
6. 5v Power for powered sensors.

RobCrezz

Is there any way you can make it have the option to give a MPH speed reading (even if the speedo reads in kmh)?

Nice work by the way.

chu

iTrader: (72)

Hamish, I jsut want some clarification whether the 3.0DA cable will also work for CT9A platform? I'm ready to order, and would like to order the 3.0DA if it is a more universal application.