You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
About month ago I bought converted LHD Evo IV as first modification I decided to change ECU for one from Evo VIII. Before cuting the harness I wanted to check if it is working so i have connected it directly to Openport 1.3U cable.
Below how I did it.
Cable pin 1 connected to ECU pin 56
Cable pin 4 connected to ground (battery -)
Cable pin 5 connected to ground (battery -)
Cable pin 7 connected to ECU pin 62
Cable pin 16 connected to 12V (battery +)
ECU pin 12 connected to 12V (battery +)
ECU pin 25 connected to 12V (battery +)
ECU pin 13 connected to ground (battery -)
ECU pin 26 connected to ground (battery -)
ECU pin 79 connected to additional cable from 1.3U cable
EvoScan is working but I cant flash ECU
ECUflash is not working at all.
I have Evo VIII ECU with following symbols (4 plugs)
1860A276 E6T34895 H 4322 111
ECUflash 1.42 is showing following information
[09:18:37.775] Using interface OpenPort 1.3 Universal TX27#M5wc266b6c599a8406a9052b4ecfe751d2d5391b7d3
[09:18:37.775] interface close
[09:18:37.775] unable to connect to vehicle interface.
ECUflash 1.29a is showing following information
[12:15:31.216] sending init sequence 1 (0001)