**Need Help setting up V7???** Here is your answer
#1
**Need Help setting up V7???** Here is your answer
Phenem asked someone make this thread in hopes of decluttering the V7 thread. With that being said if you are having issues setting up a V7 rom, post up which version you have, and which rom ID you are switching from so we can better help diagnose your issues. I am sure that others will chime in to help also.
#2
Evolving Member
iTrader: (7)
Join Date: Jul 2007
Location: montgomery, al
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
Couple issues that seem to have caused grief in the 78 pages of the V7 thread:
First of all, I'm using ROMID 96532706. Now that we've got that part out of the way;
Two glaring issues that seem to have a couple dozen ideas..
1) Warmup is not correct at all, this was not an issue I had when I was running the v7tX roms. Warmup is one thing on my particular vehicle that has never required much attention, until I loaded this rom.
So what gives there eh? Seems to be a divide on what the real issue might be.
2) Livemap- This might be better served in a thread by itself, but I will touch on it here-- it doesn't seem to make changes, but I can pull the data, I can log stuff. Again, this issue is probably better served in a thread by itself, but I wanted to mention it here in case its something relatively small that is not correctly set in the rom itself, or perhaps the liveMAP application.
First of all, I'm using ROMID 96532706. Now that we've got that part out of the way;
Two glaring issues that seem to have a couple dozen ideas..
1) Warmup is not correct at all, this was not an issue I had when I was running the v7tX roms. Warmup is one thing on my particular vehicle that has never required much attention, until I loaded this rom.
So what gives there eh? Seems to be a divide on what the real issue might be.
2) Livemap- This might be better served in a thread by itself, but I will touch on it here-- it doesn't seem to make changes, but I can pull the data, I can log stuff. Again, this issue is probably better served in a thread by itself, but I wanted to mention it here in case its something relatively small that is not correctly set in the rom itself, or perhaps the liveMAP application.
#3
Evolved Member
iTrader: (22)
Join Date: Nov 2003
Location: Northern KY near Cincy
Posts: 2,408
Likes: 0
Received 6 Likes
on
6 Posts
Warmup is a common issue with v7, but it was happening on other roms as well. We have pretty much got it all figured out (see my cold start thread), but now there is a 2K rpm rev upon cold startup. Once the car is warm, as I am sure you see as well, the car runs great.
Couple theories on this are...
1) it is EGR related
2) it is clutch switch related
They jury is still out on the actual cause.
Couple theories on this are...
1) it is EGR related
2) it is clutch switch related
They jury is still out on the actual cause.
#4
Evolving Member
iTrader: (7)
Join Date: Jul 2007
Location: montgomery, al
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
Warmup is a common issue with v7, but it was happening on other roms as well. We have pretty much got it all figured out (see my cold start thread), but now there is a 2K rpm rev upon cold startup. Once the car is warm, as I am sure you see as well, the car runs great.
Couple theories on this are...
1) it is EGR related
2) it is clutch switch related
They jury is still out on the actual cause.
Couple theories on this are...
1) it is EGR related
2) it is clutch switch related
They jury is still out on the actual cause.
#5
Seriously read through the cold start thread, Paul and I have been combating this with multiple solutions for a few weeks now... pretty much all ironed out with our own settings. Hopefully this helps... In case other people need the information here is a link to the thread... Poor Cold Idle (Yes I Searched)
Last edited by Fast_Freddie; Nov 10, 2009 at 09:51 AM.
The following users liked this post:
Danielbo91 (Feb 24, 2017)
#6
Map trace
I can't seem to track down the bit I'm missing to get map tracing working, can someone point me to the right thread?
96530706V7
EcuFlash 1.42
evoscan 2.5
ZT2 WB works/logs fine
1 byte load works/logs fine
loaded map
laoded xml
Big map opens with my data on the bottom, nothing on top. to be fair, I don't really know how map trace works as I have'nt got it to work on any release yet , but this is my first try in ernest.
Thanks!
96530706V7
EcuFlash 1.42
evoscan 2.5
ZT2 WB works/logs fine
1 byte load works/logs fine
loaded map
laoded xml
Big map opens with my data on the bottom, nothing on top. to be fair, I don't really know how map trace works as I have'nt got it to work on any release yet , but this is my first try in ernest.
Thanks!
#7
I can't seem to track down the bit I'm missing to get map tracing working, can someone point me to the right thread?
96530706V7
EcuFlash 1.42
evoscan 2.5
ZT2 WB works/logs fine
1 byte load works/logs fine
loaded map
laoded xml
Big map opens with my data on the bottom, nothing on top. to be fair, I don't really know how map trace works as I have'nt got it to work on any release yet , but this is my first try in ernest.
Thanks!
96530706V7
EcuFlash 1.42
evoscan 2.5
ZT2 WB works/logs fine
1 byte load works/logs fine
loaded map
laoded xml
Big map opens with my data on the bottom, nothing on top. to be fair, I don't really know how map trace works as I have'nt got it to work on any release yet , but this is my first try in ernest.
Thanks!
and this... https://www.evolutionm.net/forums/7618463-post380.html
Last edited by Fast_Freddie; Nov 10, 2009 at 02:50 PM.
Trending Topics
#8
Evolved Member
iTrader: (17)
Seriously read through the cold start thread, Paul and I have been combating this with multiple solutions for a few weeks now... pretty much all ironed out with our own settings. Hopefully this helps... In case other people need the information here is a link to the thread... Poor Cold Idle (Yes I Searched)
If you guys have found a fix, maybe appauldd should update the first post with that fix.
#9
Applaudd's poor cold idle fix settings moving from rom ID 97140015
Fast_Freddie's poor cold idle fix settings moving from rom ID 96940011
#10
Newbie
iTrader: (8)
Join Date: Oct 2005
Location: Las Vegas
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
great thread i didnt want to clutter the v7 but i am new to v7 and want to understand it better.
I just got it downloaded and used the beta version (from someone cant remember who posted it) to convert to the big maps. Now to my question I changed the immob code, H/L octane fuel and ignition. What else should I be coping from my old ROM to v7. My current rom is 94170008. Does anything else change or am I ready to write this to my car.
I just got it downloaded and used the beta version (from someone cant remember who posted it) to convert to the big maps. Now to my question I changed the immob code, H/L octane fuel and ignition. What else should I be coping from my old ROM to v7. My current rom is 94170008. Does anything else change or am I ready to write this to my car.
#12
Evolved Member
iTrader: (17)
You must not have looked very hard... took me literally 1 minute to find this... the thread is only 18 pages long... don't be lazy guys come on....
Applaudd's poor cold idle fix settings moving from rom ID 97140015
Fast_Freddie's poor cold idle fix settings moving from rom ID 96940011
Applaudd's poor cold idle fix settings moving from rom ID 97140015
Fast_Freddie's poor cold idle fix settings moving from rom ID 96940011
EDIT: Also, those fixes should be added to the first page of that thread, just to help organize IMO.
Last edited by Evo_Jay; Nov 10, 2009 at 08:28 PM.
#14
great thread i didnt want to clutter the v7 but i am new to v7 and want to understand it better.
I just got it downloaded and used the beta version (from someone cant remember who posted it) to convert to the big maps. Now to my question I changed the immob code, H/L octane fuel and ignition. What else should I be coping from my old ROM to v7. My current rom is 94170008. Does anything else change or am I ready to write this to my car.
I just got it downloaded and used the beta version (from someone cant remember who posted it) to convert to the big maps. Now to my question I changed the immob code, H/L octane fuel and ignition. What else should I be coping from my old ROM to v7. My current rom is 94170008. Does anything else change or am I ready to write this to my car.
#15
Evolved Member
iTrader: (22)
Join Date: Nov 2003
Location: Northern KY near Cincy
Posts: 2,408
Likes: 0
Received 6 Likes
on
6 Posts
I am having major computer issues right now. Once I get everything worked out I will edit the OP and add the fixes.
As Freddie stated...the 2k rev is MINOR. Other than that the car runs like a champ. I am just **** and want to solve everything all the time.
As Freddie stated...the 2k rev is MINOR. Other than that the car runs like a champ. I am just **** and want to solve everything all the time.